1.3/1.55-μm full-duplex WDM optical transceiver modules for ATM-PON (PDS) systems using PLC-hybrid-integration and CMOS-IC technologies

Takeshi Kurdsaki, Toshikazu Hashimoto, Noboru Ishihara, Yasuhiro Suzuki, Masahiro Yanagisawa, Hideaki Kimura, Makoto Nakamura, Yuichi Tohmori, Kazutoshi Kato, Yoshihiro Kawaguchi, Yuji Akahori, Yasufumi Yamada, Kuniharu Kato, Hiromu Toba, Junichi Yoshida

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper describes design techniques for suppressing crosstalk in an optical transceiver module using PLC-hybrid-integration technologies and for achieving burst-mode operation with high sensitivity and wide dynamic range using CMOS-IC technologies. An arrangement that reduces the electrical crosstalk to less than -100 dB was designed using three-dimensional electromagnetic field analysis. The configurations of a newly developed instantaneous-response CMOS LD driver circuit is also described and instantaneous-response CMOS receiver circuit techniques are reviewed. With these techniques, we have succeeded in building optical transceiver modules for ATM-PON systems using PLC-hybrid-integration and inexpensive standard CMOS-IC fabrication processes. Under full-duplex operation at 156 Mb/s, fabricated transceiver modules showed receiver sensitivity of better than -34 dBm and dynamic range of over 28 dB, which satisfy both the class-B and class-C specifications recommended by ITU-T (International Telecommunication Union-Telecommunication standardization sector) G983.1 for the optical transceiver module for an ONU (optical network unit).

Original languageEnglish
Pages (from-to)1199-1206
Number of pages8
JournalIEICE Transactions on Communications
VolumeE82-B
Issue number8
Publication statusPublished - Jan 1 1999
Externally publishedYes

Fingerprint

Optical transceivers
Automatic teller machines
Programmable logic controllers
Wavelength division multiplexing
Crosstalk
Telecommunication
Networks (circuits)
Fiber optic networks
Transceivers
Electromagnetic fields
Standardization
Specifications
Fabrication

All Science Journal Classification (ASJC) codes

  • Software
  • Computer Networks and Communications
  • Electrical and Electronic Engineering

Cite this

Kurdsaki, T., Hashimoto, T., Ishihara, N., Suzuki, Y., Yanagisawa, M., Kimura, H., ... Yoshida, J. (1999). 1.3/1.55-μm full-duplex WDM optical transceiver modules for ATM-PON (PDS) systems using PLC-hybrid-integration and CMOS-IC technologies. IEICE Transactions on Communications, E82-B(8), 1199-1206.

1.3/1.55-μm full-duplex WDM optical transceiver modules for ATM-PON (PDS) systems using PLC-hybrid-integration and CMOS-IC technologies. / Kurdsaki, Takeshi; Hashimoto, Toshikazu; Ishihara, Noboru; Suzuki, Yasuhiro; Yanagisawa, Masahiro; Kimura, Hideaki; Nakamura, Makoto; Tohmori, Yuichi; Kato, Kazutoshi; Kawaguchi, Yoshihiro; Akahori, Yuji; Yamada, Yasufumi; Kato, Kuniharu; Toba, Hiromu; Yoshida, Junichi.

In: IEICE Transactions on Communications, Vol. E82-B, No. 8, 01.01.1999, p. 1199-1206.

Research output: Contribution to journalArticle

Kurdsaki, T, Hashimoto, T, Ishihara, N, Suzuki, Y, Yanagisawa, M, Kimura, H, Nakamura, M, Tohmori, Y, Kato, K, Kawaguchi, Y, Akahori, Y, Yamada, Y, Kato, K, Toba, H & Yoshida, J 1999, '1.3/1.55-μm full-duplex WDM optical transceiver modules for ATM-PON (PDS) systems using PLC-hybrid-integration and CMOS-IC technologies', IEICE Transactions on Communications, vol. E82-B, no. 8, pp. 1199-1206.
Kurdsaki, Takeshi ; Hashimoto, Toshikazu ; Ishihara, Noboru ; Suzuki, Yasuhiro ; Yanagisawa, Masahiro ; Kimura, Hideaki ; Nakamura, Makoto ; Tohmori, Yuichi ; Kato, Kazutoshi ; Kawaguchi, Yoshihiro ; Akahori, Yuji ; Yamada, Yasufumi ; Kato, Kuniharu ; Toba, Hiromu ; Yoshida, Junichi. / 1.3/1.55-μm full-duplex WDM optical transceiver modules for ATM-PON (PDS) systems using PLC-hybrid-integration and CMOS-IC technologies. In: IEICE Transactions on Communications. 1999 ; Vol. E82-B, No. 8. pp. 1199-1206.
@article{87f69f3812f94f2abd4196dd2b8c48b3,
title = "1.3/1.55-μm full-duplex WDM optical transceiver modules for ATM-PON (PDS) systems using PLC-hybrid-integration and CMOS-IC technologies",
abstract = "This paper describes design techniques for suppressing crosstalk in an optical transceiver module using PLC-hybrid-integration technologies and for achieving burst-mode operation with high sensitivity and wide dynamic range using CMOS-IC technologies. An arrangement that reduces the electrical crosstalk to less than -100 dB was designed using three-dimensional electromagnetic field analysis. The configurations of a newly developed instantaneous-response CMOS LD driver circuit is also described and instantaneous-response CMOS receiver circuit techniques are reviewed. With these techniques, we have succeeded in building optical transceiver modules for ATM-PON systems using PLC-hybrid-integration and inexpensive standard CMOS-IC fabrication processes. Under full-duplex operation at 156 Mb/s, fabricated transceiver modules showed receiver sensitivity of better than -34 dBm and dynamic range of over 28 dB, which satisfy both the class-B and class-C specifications recommended by ITU-T (International Telecommunication Union-Telecommunication standardization sector) G983.1 for the optical transceiver module for an ONU (optical network unit).",
author = "Takeshi Kurdsaki and Toshikazu Hashimoto and Noboru Ishihara and Yasuhiro Suzuki and Masahiro Yanagisawa and Hideaki Kimura and Makoto Nakamura and Yuichi Tohmori and Kazutoshi Kato and Yoshihiro Kawaguchi and Yuji Akahori and Yasufumi Yamada and Kuniharu Kato and Hiromu Toba and Junichi Yoshida",
year = "1999",
month = "1",
day = "1",
language = "English",
volume = "E82-B",
pages = "1199--1206",
journal = "IEICE Transactions on Communications",
issn = "0916-8516",
publisher = "Maruzen Co., Ltd/Maruzen Kabushikikaisha",
number = "8",

}

TY - JOUR

T1 - 1.3/1.55-μm full-duplex WDM optical transceiver modules for ATM-PON (PDS) systems using PLC-hybrid-integration and CMOS-IC technologies

AU - Kurdsaki, Takeshi

AU - Hashimoto, Toshikazu

AU - Ishihara, Noboru

AU - Suzuki, Yasuhiro

AU - Yanagisawa, Masahiro

AU - Kimura, Hideaki

AU - Nakamura, Makoto

AU - Tohmori, Yuichi

AU - Kato, Kazutoshi

AU - Kawaguchi, Yoshihiro

AU - Akahori, Yuji

AU - Yamada, Yasufumi

AU - Kato, Kuniharu

AU - Toba, Hiromu

AU - Yoshida, Junichi

PY - 1999/1/1

Y1 - 1999/1/1

N2 - This paper describes design techniques for suppressing crosstalk in an optical transceiver module using PLC-hybrid-integration technologies and for achieving burst-mode operation with high sensitivity and wide dynamic range using CMOS-IC technologies. An arrangement that reduces the electrical crosstalk to less than -100 dB was designed using three-dimensional electromagnetic field analysis. The configurations of a newly developed instantaneous-response CMOS LD driver circuit is also described and instantaneous-response CMOS receiver circuit techniques are reviewed. With these techniques, we have succeeded in building optical transceiver modules for ATM-PON systems using PLC-hybrid-integration and inexpensive standard CMOS-IC fabrication processes. Under full-duplex operation at 156 Mb/s, fabricated transceiver modules showed receiver sensitivity of better than -34 dBm and dynamic range of over 28 dB, which satisfy both the class-B and class-C specifications recommended by ITU-T (International Telecommunication Union-Telecommunication standardization sector) G983.1 for the optical transceiver module for an ONU (optical network unit).

AB - This paper describes design techniques for suppressing crosstalk in an optical transceiver module using PLC-hybrid-integration technologies and for achieving burst-mode operation with high sensitivity and wide dynamic range using CMOS-IC technologies. An arrangement that reduces the electrical crosstalk to less than -100 dB was designed using three-dimensional electromagnetic field analysis. The configurations of a newly developed instantaneous-response CMOS LD driver circuit is also described and instantaneous-response CMOS receiver circuit techniques are reviewed. With these techniques, we have succeeded in building optical transceiver modules for ATM-PON systems using PLC-hybrid-integration and inexpensive standard CMOS-IC fabrication processes. Under full-duplex operation at 156 Mb/s, fabricated transceiver modules showed receiver sensitivity of better than -34 dBm and dynamic range of over 28 dB, which satisfy both the class-B and class-C specifications recommended by ITU-T (International Telecommunication Union-Telecommunication standardization sector) G983.1 for the optical transceiver module for an ONU (optical network unit).

UR - http://www.scopus.com/inward/record.url?scp=0032596435&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032596435&partnerID=8YFLogxK

M3 - Article

VL - E82-B

SP - 1199

EP - 1206

JO - IEICE Transactions on Communications

JF - IEICE Transactions on Communications

SN - 0916-8516

IS - 8

ER -