1P1-X02 最大筋力を考慮した筋骨格システムの位置制御

Translated title of the contribution: 1P1-X02 Set-point Control of a Musculoskeletal System Considering Maximum Muscular Force

中川 大輔, 松谷 祐希, 木野 仁, 田原 健二

Research output: Contribution to journalArticle

Abstract

This paper proposes a set-point control method for a musculoskeletal system considering maximum muscular force. In our previous work, the set-point control method for a musculoskeletal system was proposed which combines a feedforward control with a sensory feedback control including a considerable time-delay. However, the maximum output force of each muscle have not been considered though it sometimes induces a wind-up phenomenon because of the saturation of the muscular force. The ratio function to determine the ratio of feedforward and feedback control inputs is newly introduced in this paper to prevent such a wind-up phenomenon without the saturation of muscular force, and generate more sophisticated reaction motion even if disturbances are added on the end-point during movement. Numerical simulation results are shown to demonstrate the effectiveness of the proposed method.
Original languageJapanese
Pages (from-to)"1P1-X02(1)"-"1P1-X02(4)"
Journalロボティクス・メカトロニクス講演会講演概要集
Volume2015
Publication statusPublished - May 17 2015

Fingerprint

Musculoskeletal system
Feedforward control
Feedback control
Sensory feedback
Muscle
Time delay
Computer simulation

Cite this

1P1-X02 最大筋力を考慮した筋骨格システムの位置制御. / 中川大輔; 松谷祐希; 木野仁; 田原健二.

In: ロボティクス・メカトロニクス講演会講演概要集, Vol. 2015, 17.05.2015, p. "1P1-X02(1)"-"1P1-X02(4)".

Research output: Contribution to journalArticle

@article{51e87c03be0149cebdfa35d2ef5d01f2,
title = "1P1-X02 最大筋力を考慮した筋骨格システムの位置制御",
abstract = "This paper proposes a set-point control method for a musculoskeletal system considering maximum muscular force. In our previous work, the set-point control method for a musculoskeletal system was proposed which combines a feedforward control with a sensory feedback control including a considerable time-delay. However, the maximum output force of each muscle have not been considered though it sometimes induces a wind-up phenomenon because of the saturation of the muscular force. The ratio function to determine the ratio of feedforward and feedback control inputs is newly introduced in this paper to prevent such a wind-up phenomenon without the saturation of muscular force, and generate more sophisticated reaction motion even if disturbances are added on the end-point during movement. Numerical simulation results are shown to demonstrate the effectiveness of the proposed method.",
author = "大輔 中川 and 祐希 松谷 and 仁 木野 and 健二 田原",
year = "2015",
month = "5",
day = "17",
language = "Japanese",
volume = "2015",
pages = "{"}1P1--X02(1){"}--{"}1P1--X02(4){"}",
journal = "ロボティクス・メカトロニクス講演会講演概要集",
publisher = "一般社団法人日本機械学会",

}

TY - JOUR

T1 - 1P1-X02 最大筋力を考慮した筋骨格システムの位置制御

AU - 中川, 大輔

AU - 松谷, 祐希

AU - 木野, 仁

AU - 田原, 健二

PY - 2015/5/17

Y1 - 2015/5/17

N2 - This paper proposes a set-point control method for a musculoskeletal system considering maximum muscular force. In our previous work, the set-point control method for a musculoskeletal system was proposed which combines a feedforward control with a sensory feedback control including a considerable time-delay. However, the maximum output force of each muscle have not been considered though it sometimes induces a wind-up phenomenon because of the saturation of the muscular force. The ratio function to determine the ratio of feedforward and feedback control inputs is newly introduced in this paper to prevent such a wind-up phenomenon without the saturation of muscular force, and generate more sophisticated reaction motion even if disturbances are added on the end-point during movement. Numerical simulation results are shown to demonstrate the effectiveness of the proposed method.

AB - This paper proposes a set-point control method for a musculoskeletal system considering maximum muscular force. In our previous work, the set-point control method for a musculoskeletal system was proposed which combines a feedforward control with a sensory feedback control including a considerable time-delay. However, the maximum output force of each muscle have not been considered though it sometimes induces a wind-up phenomenon because of the saturation of the muscular force. The ratio function to determine the ratio of feedforward and feedback control inputs is newly introduced in this paper to prevent such a wind-up phenomenon without the saturation of muscular force, and generate more sophisticated reaction motion even if disturbances are added on the end-point during movement. Numerical simulation results are shown to demonstrate the effectiveness of the proposed method.

UR - http://ci.nii.ac.jp/naid/110010053315

M3 - 記事

VL - 2015

SP - "1P1-X02(1)"-"1P1-X02(4)"

JO - ロボティクス・メカトロニクス講演会講演概要集

JF - ロボティクス・メカトロニクス講演会講演概要集

ER -