3-D high-density strain mapping procedure based on high-resolution CT

Masakazu Kobayashi, Hiroyuki Toda, Tomomi Ohgaki, Kentaro Uesugi, David S. Wilkinson, Toshiro Kobayashi, Yuji Kawai, Yoshimitsu Aoki

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

A tracking procedure for the high-resolution X-ray computed tomography (CT) has been developed in order to measure 3-D local strain within a deforming material in high-density. A dispersion-strengthened copper alloy model sample with alumina particles, which contains micropores, was visualized by the synchrotron radiation CT. The pores observed in reconstructed CT volumes were used as tracking markers. The developed tracking method using a set of matching parameters, which classifies matched, pended and rejected markers, exhibited high ratio of success tracking. Furthermore, the ratio was improved by applying the spring model method, which is one of the particle image velocity (PIV) methods utilized in the field of the fluid mechanics, to the pended markers. The method based on the image analysis of CT imaging volumes provides us 3-D high-density strain mapping.

Original languageEnglish
Title of host publicationSupplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006
Pages2377-2382
Number of pages6
EditionPART 3
Publication statusPublished - Dec 1 2007
Externally publishedYes
Event5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 - Vancouver, Canada
Duration: Jul 4 2006Jul 8 2006

Publication series

NameMaterials Science Forum
NumberPART 3
Volume539-543
ISSN (Print)0255-5476

Other

Other5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006
CountryCanada
CityVancouver
Period7/4/067/8/06

Fingerprint

Tomography
tomography
markers
high resolution
copper alloys
Aluminum Oxide
fluid mechanics
Copper alloys
Fluid mechanics
Synchrotron radiation
image analysis
Image analysis
synchrotron radiation
Alumina
aluminum oxides
porosity
Imaging techniques
X rays
x rays

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Kobayashi, M., Toda, H., Ohgaki, T., Uesugi, K., Wilkinson, D. S., Kobayashi, T., ... Aoki, Y. (2007). 3-D high-density strain mapping procedure based on high-resolution CT. In Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006 (PART 3 ed., pp. 2377-2382). (Materials Science Forum; Vol. 539-543, No. PART 3).

3-D high-density strain mapping procedure based on high-resolution CT. / Kobayashi, Masakazu; Toda, Hiroyuki; Ohgaki, Tomomi; Uesugi, Kentaro; Wilkinson, David S.; Kobayashi, Toshiro; Kawai, Yuji; Aoki, Yoshimitsu.

Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 3. ed. 2007. p. 2377-2382 (Materials Science Forum; Vol. 539-543, No. PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kobayashi, M, Toda, H, Ohgaki, T, Uesugi, K, Wilkinson, DS, Kobayashi, T, Kawai, Y & Aoki, Y 2007, 3-D high-density strain mapping procedure based on high-resolution CT. in Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 3 edn, Materials Science Forum, no. PART 3, vol. 539-543, pp. 2377-2382, 5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006, Vancouver, Canada, 7/4/06.
Kobayashi M, Toda H, Ohgaki T, Uesugi K, Wilkinson DS, Kobayashi T et al. 3-D high-density strain mapping procedure based on high-resolution CT. In Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 3 ed. 2007. p. 2377-2382. (Materials Science Forum; PART 3).
Kobayashi, Masakazu ; Toda, Hiroyuki ; Ohgaki, Tomomi ; Uesugi, Kentaro ; Wilkinson, David S. ; Kobayashi, Toshiro ; Kawai, Yuji ; Aoki, Yoshimitsu. / 3-D high-density strain mapping procedure based on high-resolution CT. Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 3. ed. 2007. pp. 2377-2382 (Materials Science Forum; PART 3).
@inproceedings{bd906b4f00c44a12ab242df5a1a80ddc,
title = "3-D high-density strain mapping procedure based on high-resolution CT",
abstract = "A tracking procedure for the high-resolution X-ray computed tomography (CT) has been developed in order to measure 3-D local strain within a deforming material in high-density. A dispersion-strengthened copper alloy model sample with alumina particles, which contains micropores, was visualized by the synchrotron radiation CT. The pores observed in reconstructed CT volumes were used as tracking markers. The developed tracking method using a set of matching parameters, which classifies matched, pended and rejected markers, exhibited high ratio of success tracking. Furthermore, the ratio was improved by applying the spring model method, which is one of the particle image velocity (PIV) methods utilized in the field of the fluid mechanics, to the pended markers. The method based on the image analysis of CT imaging volumes provides us 3-D high-density strain mapping.",
author = "Masakazu Kobayashi and Hiroyuki Toda and Tomomi Ohgaki and Kentaro Uesugi and Wilkinson, {David S.} and Toshiro Kobayashi and Yuji Kawai and Yoshimitsu Aoki",
year = "2007",
month = "12",
day = "1",
language = "English",
isbn = "0878494286",
series = "Materials Science Forum",
number = "PART 3",
pages = "2377--2382",
booktitle = "Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006",
edition = "PART 3",

}

TY - GEN

T1 - 3-D high-density strain mapping procedure based on high-resolution CT

AU - Kobayashi, Masakazu

AU - Toda, Hiroyuki

AU - Ohgaki, Tomomi

AU - Uesugi, Kentaro

AU - Wilkinson, David S.

AU - Kobayashi, Toshiro

AU - Kawai, Yuji

AU - Aoki, Yoshimitsu

PY - 2007/12/1

Y1 - 2007/12/1

N2 - A tracking procedure for the high-resolution X-ray computed tomography (CT) has been developed in order to measure 3-D local strain within a deforming material in high-density. A dispersion-strengthened copper alloy model sample with alumina particles, which contains micropores, was visualized by the synchrotron radiation CT. The pores observed in reconstructed CT volumes were used as tracking markers. The developed tracking method using a set of matching parameters, which classifies matched, pended and rejected markers, exhibited high ratio of success tracking. Furthermore, the ratio was improved by applying the spring model method, which is one of the particle image velocity (PIV) methods utilized in the field of the fluid mechanics, to the pended markers. The method based on the image analysis of CT imaging volumes provides us 3-D high-density strain mapping.

AB - A tracking procedure for the high-resolution X-ray computed tomography (CT) has been developed in order to measure 3-D local strain within a deforming material in high-density. A dispersion-strengthened copper alloy model sample with alumina particles, which contains micropores, was visualized by the synchrotron radiation CT. The pores observed in reconstructed CT volumes were used as tracking markers. The developed tracking method using a set of matching parameters, which classifies matched, pended and rejected markers, exhibited high ratio of success tracking. Furthermore, the ratio was improved by applying the spring model method, which is one of the particle image velocity (PIV) methods utilized in the field of the fluid mechanics, to the pended markers. The method based on the image analysis of CT imaging volumes provides us 3-D high-density strain mapping.

UR - http://www.scopus.com/inward/record.url?scp=37149017734&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=37149017734&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:37149017734

SN - 0878494286

SN - 9780878494286

T3 - Materials Science Forum

SP - 2377

EP - 2382

BT - Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006

ER -