3D printing system of magnetic anisotropy for artificial cilia

Seiji Azukizawa, Hayato Shinoda, Kazuki Tokumaru, Fujio Tsumori

Research output: Contribution to journalArticle

Abstract

In this paper, we developed a new 3D-printing system for magnetic elastomer, and demonstrated to fabricate artificial cilia. Natural cilia are hair-like organ found in nature. They are effective fluidic system in the natural world that are widely observed on surfaces of microorganisms of creatures, such as Paramecium and throat surface of mammals. Recently, the motion of cilia has been analyzed and mimicked for developing soft actuator, for example, some studies on artificial cilia driven magnetically have been reported. They are small soft actuators, and there are various manufacturing methods for these actuators depending on materials and products. Among them, authors have already developed the concept of a printing system that not only forms a three-dimensional object but also prints out the deformation of the structure. This system can fabricate various shapes of soft actuators without any assembly. In this report, we utilized UV-curable urethane acrylate as a more flexible material than that used in the previous reports, and fabricated artificial cilia by the printer. We set magnetic anisotropy to each cilium and mimicked a metachronal wave, sequential action of plural cilia that causes effective flow.

Original languageEnglish
Pages (from-to)139-144
Number of pages6
JournalJournal of Photopolymer Science and Technology
Volume31
Issue number1
DOIs
Publication statusPublished - Jan 1 2018

Fingerprint

Magnetic anisotropy
Printing
Actuators
Elastomers
Mammals
Fluidics
Microorganisms

All Science Journal Classification (ASJC) codes

  • Polymers and Plastics
  • Organic Chemistry
  • Materials Chemistry

Cite this

3D printing system of magnetic anisotropy for artificial cilia. / Azukizawa, Seiji; Shinoda, Hayato; Tokumaru, Kazuki; Tsumori, Fujio.

In: Journal of Photopolymer Science and Technology, Vol. 31, No. 1, 01.01.2018, p. 139-144.

Research output: Contribution to journalArticle

Azukizawa, Seiji ; Shinoda, Hayato ; Tokumaru, Kazuki ; Tsumori, Fujio. / 3D printing system of magnetic anisotropy for artificial cilia. In: Journal of Photopolymer Science and Technology. 2018 ; Vol. 31, No. 1. pp. 139-144.
@article{5783f8842bfe4696b52fb7b32bbc4ffb,
title = "3D printing system of magnetic anisotropy for artificial cilia",
abstract = "In this paper, we developed a new 3D-printing system for magnetic elastomer, and demonstrated to fabricate artificial cilia. Natural cilia are hair-like organ found in nature. They are effective fluidic system in the natural world that are widely observed on surfaces of microorganisms of creatures, such as Paramecium and throat surface of mammals. Recently, the motion of cilia has been analyzed and mimicked for developing soft actuator, for example, some studies on artificial cilia driven magnetically have been reported. They are small soft actuators, and there are various manufacturing methods for these actuators depending on materials and products. Among them, authors have already developed the concept of a printing system that not only forms a three-dimensional object but also prints out the deformation of the structure. This system can fabricate various shapes of soft actuators without any assembly. In this report, we utilized UV-curable urethane acrylate as a more flexible material than that used in the previous reports, and fabricated artificial cilia by the printer. We set magnetic anisotropy to each cilium and mimicked a metachronal wave, sequential action of plural cilia that causes effective flow.",
author = "Seiji Azukizawa and Hayato Shinoda and Kazuki Tokumaru and Fujio Tsumori",
year = "2018",
month = "1",
day = "1",
doi = "10.2494/photopolymer.31.121",
language = "English",
volume = "31",
pages = "139--144",
journal = "Journal of Photopolymer Science and Technology",
issn = "0914-9244",
publisher = "Tokai University",
number = "1",

}

TY - JOUR

T1 - 3D printing system of magnetic anisotropy for artificial cilia

AU - Azukizawa, Seiji

AU - Shinoda, Hayato

AU - Tokumaru, Kazuki

AU - Tsumori, Fujio

PY - 2018/1/1

Y1 - 2018/1/1

N2 - In this paper, we developed a new 3D-printing system for magnetic elastomer, and demonstrated to fabricate artificial cilia. Natural cilia are hair-like organ found in nature. They are effective fluidic system in the natural world that are widely observed on surfaces of microorganisms of creatures, such as Paramecium and throat surface of mammals. Recently, the motion of cilia has been analyzed and mimicked for developing soft actuator, for example, some studies on artificial cilia driven magnetically have been reported. They are small soft actuators, and there are various manufacturing methods for these actuators depending on materials and products. Among them, authors have already developed the concept of a printing system that not only forms a three-dimensional object but also prints out the deformation of the structure. This system can fabricate various shapes of soft actuators without any assembly. In this report, we utilized UV-curable urethane acrylate as a more flexible material than that used in the previous reports, and fabricated artificial cilia by the printer. We set magnetic anisotropy to each cilium and mimicked a metachronal wave, sequential action of plural cilia that causes effective flow.

AB - In this paper, we developed a new 3D-printing system for magnetic elastomer, and demonstrated to fabricate artificial cilia. Natural cilia are hair-like organ found in nature. They are effective fluidic system in the natural world that are widely observed on surfaces of microorganisms of creatures, such as Paramecium and throat surface of mammals. Recently, the motion of cilia has been analyzed and mimicked for developing soft actuator, for example, some studies on artificial cilia driven magnetically have been reported. They are small soft actuators, and there are various manufacturing methods for these actuators depending on materials and products. Among them, authors have already developed the concept of a printing system that not only forms a three-dimensional object but also prints out the deformation of the structure. This system can fabricate various shapes of soft actuators without any assembly. In this report, we utilized UV-curable urethane acrylate as a more flexible material than that used in the previous reports, and fabricated artificial cilia by the printer. We set magnetic anisotropy to each cilium and mimicked a metachronal wave, sequential action of plural cilia that causes effective flow.

UR - http://www.scopus.com/inward/record.url?scp=85053275001&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053275001&partnerID=8YFLogxK

U2 - 10.2494/photopolymer.31.121

DO - 10.2494/photopolymer.31.121

M3 - Article

VL - 31

SP - 139

EP - 144

JO - Journal of Photopolymer Science and Technology

T2 - Journal of Photopolymer Science and Technology

JF - Journal of Photopolymer Science and Technology

SN - 0914-9244

IS - 1

ER -