Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Kunio Ishikawa
2018

Fabrication of calcite block with interconnecting porous structure for bone substitutes

Tram, N. X. T. & Ishikawa, K., Jan 1 2018, 6th International Conference on the Development of Biomedical Engineering in Vietnam, BME6. Vo Van, T., Nguyen Le, T. A. & Nguyen Duc, T. (eds.). Springer Verlag, p. 411-413 3 p. (IFMBE Proceedings; vol. 63).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2020

Cerium doping and cerium aluminium co-doping effects on the sol-gel processing of Y3Fe5O12 (YIG): Bulk and thin films

Opuchovic, O., Andrulevicius, M., Tamulevicius, S., Rehspringer, J. L., Beganskiene, A., Skaudzius, R., Ishikawa, K. & Kareiva, A., Jan 2020, In : Solid State Sciences. 99, 106065.

Research output: Contribution to journalArticle

Open Access
2012

Antibacterial activity of ammonium hexafluorosilicate solution with antimicrobial agents for the prevention of dentin caries

Shibata, S., Suge, T., Kismura, T., Ishikawa, K. & Matsuo, T., Feb 1 2012, In : American journal of dentistry. 25, 1, p. 31-34 4 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)
2016

Osteoconductivity and bioresorption of an interconnecting porous carbonate apatite with enhanced mechanical strength

Tram, N. X. T., Maruta, M., Tusru, K., Matsuya, S. & Ishikawa, K., Jan 1 2016, Bioceramics 27. Ana, I. D. & Triyana, K. (eds.). Trans Tech Publications Ltd, p. 23-26 4 p. (Key Engineering Materials; vol. 696).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

The use of poly (ε-caprolactone) to enhance the mechanical strength of porous Si-substituted carbonate apatite

Bang, L. T., Kawachi, G., Nakagawa, M., Munar, M., Ishikawa, K. & Othman, R., Oct 5 2013, In : Journal of Applied Polymer Science. 130, 1, p. 426-433 8 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)
2020

Fabrication of porous carbonate apatite granules using microfiber and its histological evaluations in rabbit calvarial bone defects

Akita, K., Fukuda, N., Kamada, K., Kudoh, K., Kurio, N., Tsuru, K., Ishikawa, K. & Miyamoto, Y., Mar 1 2020, In : Journal of Biomedical Materials Research - Part A. 108, 3, p. 709-721 13 p.

Research output: Contribution to journalArticle

2011

Fabrication of low-crystalline carbonate apatite foam bone replacement based on phase transformation of calcite foam

Maruta, M., Matsuya, S., Nakamura, S. & Ishikawa, K., Feb 21 2011, In : dental materials journal. 30, 1, p. 14-20 7 p.

Research output: Contribution to journalArticle

33 Citations (Scopus)
2014

Effects of PLGA reinforcement methods on the mechanical property of carbonate apatite foam

Munar, G. M., Munar, M. L., Tsuru, K. & Ishikawa, K., Jan 1 2014, In : Bio-Medical Materials and Engineering. 24, 5, p. 1817-1825 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2020
2013

Mechanical behavior and cell response of PCL coated α-TCP foam for cancellous-type bone replacement

Bang, L. T., Tsuru, K., Munar, M., Ishikawa, K. & Othman, R., Jul 1 2013, In : Ceramics International. 39, 5, p. 5631-5637 7 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
2012

Calcite bone substitute prepared from calcium hydroxide compact using heat-treatment under carbon dioxide atmosphere

Tsuru, K., Otsu, A., Maruta, M., Valanezhad, A., Kawachi, G., Takeuchi, A., Matsuya, S. & Ishikawa, K., Jan 1 2012, Bioceramics 23. p. 166-169 4 p. (Key Engineering Materials; vol. 493-494).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2013

Improvement in handling property of αTCP cement

Maruta, M., Matsuya, S., Tsuru, K. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 202-205 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison of PLGA reinforcement method for carbonate apatite foam

Munar, G. M., Munar, M. L., Tsuru, K. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 417-420 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2014

Hydrothermal conversion of calcite foam to carbonate apatite

Tram, N. X. T., Maruta, M., Tsuru, K., Matsuya, S. & Ishikawa, K., 2014, Advances in Bioceramics and Porous Ceramics VI - A Collection of Papers Presented at the 37th International Conference on Advanced Ceramics and Composites, ICACC 2013. 6 ed. Vol. 34. p. 59-65 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Fabrication of porous calcite using chopped nylon fiber and its evaluation using rats

Ishikawa, K., Tram, N. X. T., Tsuru, K. & Toita, R., Jan 1 2015, In : Journal of Materials Science: Materials in Medicine. 26, 2

Research output: Contribution to journalArticle

6 Citations (Scopus)
2013

Basic properties of carbonate apatite cement consisting of vaterite and dicalcium phosphate anhydrous

Cahyanto, A., Maruta, M., Tsuru, K., Matsuya, S. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 192-196 5 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

20 Citations (Scopus)
2015

Development and characterization of porous calcium phosphate cement using α-tricalcium phosphate bead

Kien, P. T., Kanji, T. & Ishikawa, K., Jan 1 2015, 5th International Conference on Biomedical Engineering in Vietnam. Toi, V. V. & Phuong, T. H. L. (eds.). Springer Verlag, p. 507-510 4 p. (IFMBE Proceedings; vol. 46).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2013

Effects of hydrothermal treatment on properties of titanium nitride coating for dental implants

Shi, X., Tsuru, K., Kawachi, G. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 247-250 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Carbonate apatite formation during the setting reaction of apatite cement

Cahyanto, A., Tsuru, K. & Ishikawa, K., 2013, Advances in Bioceramics and Porous Ceramics V - A Collection of Papers Presented at the 36th International Conference on Advanced Ceramics and Composites, ICACC 2012. 6 ed. Vol. 33. p. 7-10 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Citations (Scopus)
2015

Effects of the method of apatite seed crystals addition on setting reaction of α-tricalcium phosphate based apatite cement

Tsuru, K., Ruslin, Maruta, M., Matsuya, S. & Ishikawa, K., Oct 1 2015, In : Journal of Materials Science: Materials in Medicine. 26, 10, 244.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Setting reaction of α-TCP spheres and an acidic calcium phosphate solution for the fabrication of fully interconnected macroporous calcium phosphate

Kien, P. T., Ishikawa, K. & Tsuru, K., Dec 1 2015, In : Ceramics International. 41, 10, p. 13525-13531 7 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)
2012

Fabrication of βtcp with fully-interconnected porous structure

Nikaido, T., Tsuru, K., Daitou, F., Munar, M., Matsuya, S., Nakamura, S. & Ishikawa, K., Jan 1 2012, Bioceramics 23. p. 135-138 4 p. (Key Engineering Materials; vol. 493-494).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Bone marrow cell response on carbonate apatite/PCL-coated α-tricalcium phosphate foam

Le, T. B., Shi, X. L., Kunio, I. & Othman, R., Jan 8 2014, Frontiers in Materials and Minerals Engineering. p. 7-12 6 p. (Advanced Materials Research; vol. 858).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2020

Formation of calcium hydroxyapatite with high concentration of homogeneously distributed silver

Grigoraviciute-Puroniene, I., Stankeviciute, Z., Ishikawa, K. & Kareiva, A., Feb 2020, In : Microporous and Mesoporous Materials. 293, 109806.

Research output: Contribution to journalArticle

2012

A novel HAp coating method on titanium

Valanezhad, A., Tsuru, K., Maruta, M., Matsuya, S. & Ishikawa, K., 2012, Bioceramics 23. Vol. 493-494. p. 495-498 4 p. (Key Engineering Materials; vol. 493-494).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2017

Carbonate apatite scaffolds for regenerative medicine

Ishikawa, K., Jan 1 2017, Handbook of Intelligent Scaffolds for Tissue Engineering and Regenerative Medicine, 2nd Edition. Pan Stanford Publishing Pte. Ltd., p. 141-160 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Citation (Scopus)
2018

Fabrication of calcite-coated rough-surface titanium using calcium nitrate

Shi, R., Sugiura, Y., Tsuru, K. & Ishikawa, K., Dec 25 2018, In : Surface and Coatings Technology. 356, p. 72-79 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
8 Citations (Scopus)

Feasibility evaluation of low-crystallinity β-tricalcium phosphate blocks as a bone substitute fabricated by a dissolution–precipitation reaction from α-tricalcium phosphate blocks

Tripathi, G., Sugiura, Y., Kareiva, A., Garskaite, E., Tsuru, K. & Ishikawa, K., Aug 1 2018, In : Journal of Biomaterials Applications. 33, 2, p. 259-270 12 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
2016
10 Citations (Scopus)
2017

Fabrication of dicalcium phosphate dihydrate-coated β-TCP granules and evaluation of their osteoconductivity using experimental rats

Shariff, K. A., Tsuru, K. & Ishikawa, K., Jun 1 2017, In : Materials Science and Engineering C. 75, p. 1411-1419 9 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
2018

Fabrication of octacalcium phosphate foam through phase conversion and its histological evaluation

Sugiura, Y., Munar, M. L. & Ishikawa, K., Feb 1 2018, In : Materials Letters. 212, p. 28-31 4 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Compositional and histological comparison of carbonate apatite fabricated by dissolution–precipitation reaction and Bio-Oss®

Fujisawa, K., Akita, K., Fukuda, N., Kamada, K., Kudoh, T., Ohe, G., Mano, T., Tsuru, K., Ishikawa, K. & Miyamoto, Y., Aug 1 2018, In : Journal of Materials Science: Materials in Medicine. 29, 8, 121.

Research output: Contribution to journalArticle

9 Citations (Scopus)
2014
16 Citations (Scopus)
2013

Organic-inorganic composites designed for biomedical applications

Miyazaki, T., Ishikawa, K., Shirosaki, Y. & Ohtsukid, C., Nov 1 2013, In : Biological and Pharmaceutical Bulletin. 36, 11, p. 1670-1675 6 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
2020

Sol–gel synthesis of calcium phosphate-based biomaterials—A review of environmentally benign, simple, and effective synthesis routes

Ishikawa, K., Garskaite, E. & Kareiva, A., Jan 1 2020, (Accepted/In press) In : Journal of Sol-Gel Science and Technology.

Research output: Contribution to journalReview article

2016

Preventive effects of a phospholipid polymer coating on PMMA on biofilm formation by oral streptococci

Shibata, Y., Yamashita, Y., Tsuru, K., Ishihara, K., Fukazawa, K. & Ishikawa, K., Dec 30 2016, In : Applied Surface Science. 390, p. 602-607 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)
2020

Effects of surface roughening and calcite coating of titanium on cell growth and differentiation

Shi, R., Hayashi, K., Bang, L. T. & Ishikawa, K., Feb 1 2020, In : Journal of Biomaterials Applications. 34, 7, p. 917-927 11 p.

Research output: Contribution to journalArticle

2018

Physical and histological comparison of hydroxyapatite, carbonate apatite, and β-tricalcium phosphate bone substitutes

Ishikawa, K., Miyamoto, Y., Tsuchiya, A., Hayashi, K., Tsuru, K. & Ohe, G., Oct 16 2018, In : Materials. 11, 10, 1993.

Research output: Contribution to journalArticle

10 Citations (Scopus)
2011

Comparison of apatite-coated titanium prepared by blast coating and flame spray methods -Evaluation using simulated body fluid and initial histological study

Mano, T., Ishikawa, K., Harada, K., Umeda, H. & Ueyama, Y., Aug 16 2011, In : dental materials journal. 30, 4, p. 431-437 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2014

Carbonate apatite bone replacement

Ishikawa, K., Jan 1 2014, In : Key Engineering Materials. 587, p. 17-20 4 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)
2011

Occlusion of dentin tubules with antibacterial ammonium hexafluorosilicate solution for the prevention of dentin caries

Shibata, S., Suge, T., Ishikawa, K. & Matsuo, T., Jun 1 2011, In : American journal of dentistry. 24, 3, p. 148-152 5 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2018

Micro-CT evaluation on osteoconductivity of DCPD-coated β-TCP granule using experimental rats

Shariff, K. A., Tsuru, K. & Ishikawa, K., Oct 10 2018, In : Journal of Physics: Conference Series. 1082, 1, 012069.

Research output: Contribution to journalConference article

2016
4 Citations (Scopus)
2015
3 Citations (Scopus)
2012

Fabrication of solid and hollow carbonate apatite microspheres as bone substitutes using calcite microspheres as a precursor

Sunouchi, K., Tsuru, K., Maruta, M., Kawachi, G., Matsuya, S., Terada, Y. & Ishikawa, K., Aug 13 2012, In : dental materials journal. 31, 4, p. 549-557 9 p.

Research output: Contribution to journalArticle

21 Citations (Scopus)
2016
10 Citations (Scopus)
2013

Fabrication of calcite foam by inverse ceramic foam method

Thanh, T. N. X., Maruta, M., Tsuru, K., Valanezhad, A., Matsuya, S. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 153-156 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)