Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2016
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Kunio Ishikawa
2013

Effects of solution pH on the structure and biocompatibility of Mg-containing TiO 2 layer fabricated on titanium by hydrothermal treatment

Shi, X., Tsuru, K., Xu, L., Kawachi, G. & Ishikawa, K., Apr 1 2013, In : Applied Surface Science. 270, p. 445-451 7 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
2012

Calcite bone substitute prepared from calcium hydroxide compact using heat-treatment under carbon dioxide atmosphere

Tsuru, K., Otsu, A., Maruta, M., Valanezhad, A., Kawachi, G., Takeuchi, A., Matsuya, S. & Ishikawa, K., Jan 1 2012, Bioceramics 23. p. 166-169 4 p. (Key Engineering Materials; vol. 493-494).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2020

Effects of acidic calcium phosphate concentration on setting reaction and tissue response to β-tricalcium phosphate granular cement

Fukuda, N., Ishikawa, K., Akita, K., Kamada, K., Kurio, N., Mori, Y. & Miyamoto, Y., Jan 1 2020, In : Journal of Biomedical Materials Research - Part B Applied Biomaterials. 108, 1, p. 22-29 8 p.

Research output: Contribution to journalArticle

2014

Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material

Nguyen Xuan Thanh, T., Maruta, M., Tsuru, K., Matsuya, S. & Ishikawa, K., Jan 1 2014, 11th International Fatigue Congress. Trans Tech Publications, p. 1559-1564 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)
2020

Fabrication of three-dimensional interconnected porous blocks composed of robust carbonate apatite frameworks

Putri, T. S., Hayashi, K. & Ishikawa, K., Aug 15 2020, In : Ceramics International. 46, 12, p. 20045-20049 5 p.

Research output: Contribution to journalArticle

2016

Fabrication of carbonate apatite foam based on the setting reaction of α-tricalcium phosphate foam granules

Sugiura, Y., Tsuru, K. & Ishikawa, K., Jan 1 2016, In : Ceramics International. 42, 1, p. 204-210 7 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
2020
Open Access
2013

Comparison of PLGA reinforcement method for carbonate apatite foam

Munar, G. M., Munar, M. L., Tsuru, K. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 417-420 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2016

Carbonate apatite bone replacement

Ishikawa, K., Jan 1 2016, Handbook of Bioceramics and Biocomposites. Springer International Publishing, p. 213-232 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

8 Citations (Scopus)
2012

Antibacterial activity of ammonium hexafluorosilicate solution with antimicrobial agents for the prevention of dentin caries

Shibata, S., Suge, T., Kismura, T., Ishikawa, K. & Matsuo, T., Feb 1 2012, In : American journal of dentistry. 25, 1, p. 31-34 4 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

A novel HAp coating method on titanium

Valanezhad, A., Tsuru, K., Maruta, M., Matsuya, S. & Ishikawa, K., 2012, Bioceramics 23. Vol. 493-494. p. 495-498 4 p. (Key Engineering Materials; vol. 493-494).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2014

Bone marrow cell response on carbonate apatite/PCL-coated α-tricalcium phosphate foam

Le, T. B., Shi, X. L., Kunio, I. & Othman, R., Jan 8 2014, Frontiers in Materials and Minerals Engineering. p. 7-12 6 p. (Advanced Materials Research; vol. 858).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2020

Rapid Osseointegration Bestowed by Carbonate Apatite Coating of Rough Titanium

Shi, R., Hayashi, K. & Ishikawa, K., Sep 1 2020, In : Advanced Materials Interfaces. 7, 18, 2000636.

Research output: Contribution to journalArticle

Open Access
2013

Preparation of carbonate apatite cement based on α-TCP

Matsuya, S., Maruta, M., Tsuru, K. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 197-201 5 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2016

Effects of apatite cement containing atelocollagen on attachment to and proliferation and differentiation of MC3T3-E1 osteoblastic cells

Takechi, M., Ninomiya, Y., Ohta, K., Tada, M., Sasaki, K., Rahman, M. Z., Ohta, A., Tsuru, K. & Ishikawa, K., 2016, In : Materials. 9, 4, 283.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Transformation of apatite cement to B-Type carbonate apatite using different atmosphere

Cahyanto, A., Tsuru, K. & Ishikawa, K., Jan 1 2016, Bioceramics 27. Ana, I. D. & Triyana, K. (eds.). Trans Tech Publications Ltd, p. 9-13 5 p. (Key Engineering Materials; vol. 696).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)
2019

Application of low-crystalline carbonate apatite granules in 2-stage sinus floor augmentation: A prospective clinical trial and histomorphometric evaluation

Nakagawa, T., Kudoh, K., Fukuda, N., Kasugai, S., Tachikawa, N., Koyano, K., Matsushita, Y., Sasaki, M., Ishikawa, K. & Miyamoto, Y., Dec 1 2019, In : Journal of Periodontal and Implant Science. 49, 6, p. 382-396 15 p.

Research output: Contribution to journalArticle

2012

Fabrication of microporous calcite block from calcium hydroxide compact under carbon dioxide atmosphere at high temperature

Otsu, A., Tsuru, K., Maruta, M., Munar, M. L., Matsuya, S. & Ishikawa, K., Aug 13 2012, In : dental materials journal. 31, 4, p. 593-600 8 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)
2019

PO4 adsorption on the calcite surface modulates calcite formation and crystal size

Sugiura, Y., Ishikawa, K., Onuma, K. & Makita, Y., Oct 25 2019, In : American Mineralogist. 104, 10, p. 1381-1388 8 p.

Research output: Contribution to journalArticle

2013

Organic-inorganic composites designed for biomedical applications

Miyazaki, T., Ishikawa, K., Shirosaki, Y. & Ohtsukid, C., Nov 1 2013, In : Biological and Pharmaceutical Bulletin. 36, 11, p. 1670-1675 6 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)
2020

Behavioural response of cells and bacteria on single and multiple doped Sr and Ag S53P4 sol-gel bioglass

Swe, T. T., Shariff, K. A., Mohamad, H., Ishikawa, K., Hayashi, K. & Abu Bakar, M. H., Aug 1 2020, In : Ceramics International. 46, 11, p. 17881-17890 10 p.

Research output: Contribution to journalArticle

Lanthanide-Doping Effects on the Formation of Leucite KAlSi2O6

Sabaliauskiene, A., Beganskiene, A., Ishikawa, K. & Kareiva, A., May 1 2020, In : Silicon. 12, 5, p. 1213-1223 11 p.

Research output: Contribution to journalArticle

2013

Effects of hydrothermal treatment on properties of titanium nitride coating for dental implants

Shi, X., Tsuru, K., Kawachi, G. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 247-250 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2014

Synthesis of carbonate apatite foam using β-TCP foams as precursors

Tsuru, K., Nikaido, T., Munar, M. L., Maruta, M., Matsuya, S., Nakamura, S. & Ishikawa, K., Jan 1 2014, In : Key Engineering Materials. 587, p. 52-55 4 p.

Research output: Contribution to journalConference article

8 Citations (Scopus)
2013

Influence of PLGA concentrations on structural and mechanical properties of carbonate apatite foam

Munar, G. M., Munar, M. L., Tsuru, K. & Ishikawa, K., Jul 31 2013, In : dental materials journal. 32, 4, p. 608-614 7 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
2020

Effects of surface roughening and calcite coating of titanium on cell growth and differentiation

Shi, R., Hayashi, K., Bang, L. T. & Ishikawa, K., Feb 1 2020, In : Journal of Biomaterials Applications. 34, 7, p. 917-927 11 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2019

Maxillary Sinus Floor Augmentation Using Low-Crystalline Carbonate Apatite Granules With Simultaneous Implant Installation: First-in-Human Clinical Trial

Kudoh, K., Fukuda, N., Kasugai, S., Tachikawa, N., Koyano, K., Matsushita, Y., Ogino, Y., Ishikawa, K. & Miyamoto, Y., May 2019, In : Journal of Oral and Maxillofacial Surgery. 77, 5, p. 985.e1-985.e11

Research output: Contribution to journalArticle

6 Citations (Scopus)
2012

Fabrication of βtcp with fully-interconnected porous structure

Nikaido, T., Tsuru, K., Daitou, F., Munar, M., Matsuya, S., Nakamura, S. & Ishikawa, K., Jan 1 2012, Bioceramics 23. p. 135-138 4 p. (Key Engineering Materials; vol. 493-494).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication of carbonate apatite block from calcium sulfate by hydrothermal treatment

Nomura, S., Tsuru, K., Valanezhad, A., Matsuya, S., Takahashi, I. & Ishikawa, K., Jan 1 2012, Bioceramics 23. p. 139-142 4 p. (Key Engineering Materials; vol. 493-494).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2020

Fabrication of an interconnected porous ¢-tricalcium phosphate structure by polyacrylic acid-mediated setting reaction and sintering

Putri, T. S., Sugiura, Y., Tsuru, K. & Ishikawa, K., Aug 1 2020, In : Journal of the Ceramic Society of Japan. 128, 8, p. 555-559 5 p.

Research output: Contribution to journalArticle

Open Access
2019
Open Access
5 Citations (Scopus)
2020

Titanium surface treatment by calcium modification with acid-etching promotes osteogenic activity and stability of dental implants

Doe, Y., Ida, H., Seiryu, M., Deguchi, T., Takeshita, N., Sasaki, S., Sasaki, S., Irie, D., Tsuru, K., Ishikawa, K. & Takano-Yamamoto, T., Aug 2020, In : Materialia. 12, 100801.

Research output: Contribution to journalArticle

Open Access

Fe and Zn co-substituted beta-tricalcium phosphate (β-TCP): Synthesis, structural, magnetic, mechanical and biological properties

Sinusaite, L., Popov, A., Antuzevics, A., Mazeika, K., Baltrunas, D., Yang, J. C., Horng, J. L., Shi, S., Sekino, T., Ishikawa, K., Kareiva, A. & Zarkov, A., Jul 2020, In : Materials Science and Engineering C. 112, 110918.

Research output: Contribution to journalArticle

2011

Bioactive ceramics: Cements

Ishikawa, K., Oct 1 2011, Comprehensive Biomaterials. Elsevier, Vol. 1. p. 267-283 17 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

7 Citations (Scopus)
2014

Carbonate apatite bone replacement

Ishikawa, K., Jan 1 2014, In : Key Engineering Materials. 587, p. 17-20 4 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)
2019

Effect of silver on the apatite formation of bioactive silicate glass

Swe, T. T., Shariff, K. A., Noor, A. F. M., Ishikawa, K. & Mohamad, H., Jan 1 2019, In : Materials Today: Proceedings. 17, p. 884-888 5 p.

Research output: Contribution to journalConference article

2020

Sol-gel synthesis of calcium phosphate-based coatings - A review

Ishikawa, K. & Kareiva, A., Feb 26 2020, In : Chemija. 31, 1, p. 25-41 17 p.

Research output: Contribution to journalReview article

Open Access
2013

Fabrication of βTCP foam using αTCP foam as a precursor by heat treatment

Nikaido, T., Tsuru, K., Kawachi, G., Munar, M., Matsuya, S., Nakamura, S. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 15-18 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Protectivity and adhesive strength of zinclipscombite coating on 316L stainless steel

Valanezhad, A., Tsuru, K., Maruta, M., Matsuya, S. & Ishikawa, K., Jan 1 2013, Bioceramics 24. 1 ed. p. 251-254 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Hydrothermal conversion of calcite foam to carbonate apatite

Tram, N. X. T., Maruta, M., Tsuru, K., Matsuya, S. & Ishikawa, K., 2014, Advances in Bioceramics and Porous Ceramics VI - A Collection of Papers Presented at the 37th International Conference on Advanced Ceramics and Composites, ICACC 2013. 6 ed. Vol. 34. p. 59-65 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres

Arifta, T. I., Munar, M. L., Tsuru, K. & Ishikawa, K., Jan 1 2016, Bioceramics 27. Ana, I. D. & Triyana, K. (eds.). Trans Tech Publications Ltd, p. 57-59 3 p. (Key Engineering Materials; vol. 696).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Mechanical behavior and cell response of PCL coated α-TCP foam for cancellous-type bone replacement

Bang, L. T., Tsuru, K., Munar, M., Ishikawa, K. & Othman, R., Jul 1 2013, In : Ceramics International. 39, 5, p. 5631-5637 7 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)
2011

Fabrication of low-crystalline carbonate apatite foam bone replacement based on phase transformation of calcite foam

Maruta, M., Matsuya, S., Nakamura, S. & Ishikawa, K., Feb 21 2011, In : dental materials journal. 30, 1, p. 14-20 7 p.

Research output: Contribution to journalArticle

36 Citations (Scopus)

Hydrothermal calcium modification of 316L stainless steel and its apatite forming ability in simulated body fluid

Valanezahad, A., Ishikawa, K., Tsuru, K., Maruta, M. & Matsuya, S., Oct 12 2011, In : dental materials journal. 30, 5, p. 749-753 5 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2019
Open Access
2012

A new biocompatible coating layer applied on titanium substrates using a modified zinc phosphatizing method

Valanezhad, A., Tsuru, K., Maruta, M., Kawachi, G., Matsuya, S. & Ishikawa, K., Jan 15 2012, In : Surface and Coatings Technology. 206, 8-9, p. 2207-2212 6 p.

Research output: Contribution to journalArticle

26 Citations (Scopus)
2011

Comparison of apatite-coated titanium prepared by blast coating and flame spray methods -Evaluation using simulated body fluid and initial histological study

Mano, T., Ishikawa, K., Harada, K., Umeda, H. & Ueyama, Y., Aug 16 2011, In : dental materials journal. 30, 4, p. 431-437 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2012

Fabrication of solid and hollow carbonate apatite microspheres as bone substitutes using calcite microspheres as a precursor

Sunouchi, K., Tsuru, K., Maruta, M., Kawachi, G., Matsuya, S., Terada, Y. & Ishikawa, K., Aug 13 2012, In : dental materials journal. 31, 4, p. 549-557 9 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)
2011

Hydroxyapatite coating on titanium via titanium zinc phosphate layer

Ishikawa, K., Valanezhad, A. & Tsuru, K., Dec 1 2011.

Research output: Contribution to conferencePaper

2012
5 Citations (Scopus)