Find Research outputs

Search results

• 2014

  Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material

  Nguyen Xuan Thanh, T., Maruta, M., Tsuru, K., Matsuya, S. & Ishikawa, K., Jan 1 2014, 11th International Fatigue Congress. Trans Tech Publications, p. 1559-1564 6 p. (Advanced Materials Research; vol. 891-892).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Apatite
  • Calcite
  • Carbonates
  • Polyurethanes
  • Strength of materials
  6 Citations (Scopus)
• 2013

  Basic properties of carbonate apatite cement consisting of vaterite and dicalcium phosphate anhydrous

  Cahyanto, A., Maruta, M., Tsuru, K., Matsuya, S. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 192-196 5 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carboapatite
  • dibasic calcium phosphate dihydrate
  • Apatite
  • Calcium Carbonate
  • Phosphates
  23 Citations (Scopus)

• Basic properties of starfish derived calcium carbonate and its phase transformation to carbonate apatite

  Honda, D., Takeuchi, A. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 40-43 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carboapatite
  • Apatite
  • Calcium carbonate
  • Calcium Carbonate
  • Carbonates

• Carbonate apatite formation during the setting reaction of apatite cement

  Cahyanto, A., Tsuru, K. & Ishikawa, K., 2013, Advances in Bioceramics and Porous Ceramics V - A Collection of Papers Presented at the 36th International Conference on Advanced Ceramics and Composites, ICACC 2012. 6 ed. Vol. 33. p. 7-10 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carboapatite
  • Apatite
  • Bone cement
  • Apatites
  • Carbonates
  12 Citations (Scopus)

• Comparison of PLGA reinforcement method for carbonate apatite foam

  Munar, G. M., Munar, M. L., Tsuru, K. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 417-420 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carboapatite
  • Apatite
  • Carbonates
  • Foams
  • Reinforcement
  1 Citation (Scopus)

• Effect of precursor solubility on the mechanical strength of HAp block

  Ahmad, N., Tsuru, K., Munar, M. L., Matsuya, S. & Ishikawa, K., Apr 8 2013, Advances in Bioceramics and Porous Ceramics V - A Collection of Papers Presented at the 36th International Conference on Advanced Ceramics and Composites, ICACC 2012. 6 ed. p. 3-6 4 p. (Ceramic Engineering and Science Proceedings; vol. 33, no. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Hydroxyapatite
  • Solubility
  • Durapatite
  • Strength of materials
  • Phosphates

• Effects of hydrothermal treatment on properties of titanium nitride coating for dental implants

  Shi, X., Tsuru, K., Kawachi, G. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 247-250 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • titanium nitride
  • Titanium nitride
  • Dental prostheses
  • Coatings
  • Titanium
  2 Citations (Scopus)

• Effects of solution pH on the structure and biocompatibility of Mg-containing TiO ₂ layer fabricated on titanium by hydrothermal treatment

  Shi, X., Tsuru, K., Xu, L., Kawachi, G. & Ishikawa, K., Apr 1 2013, In: Applied Surface Science. 270, p. 445-451 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Biocompatibility
  • biocompatibility
  • Titanium
  • titanium
  • Oxides
  15 Citations (Scopus)

• Fabrication of calcite foam by inverse ceramic foam method

  Thanh, T. N. X., Maruta, M., Tsuru, K., Valanezhad, A., Matsuya, S. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 153-156 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ceramic foams
  • Calcite
  • Calcium Carbonate
  • Foams
  • polyurethane foam
  2 Citations (Scopus)

• Fabrication of carbonate apatite-PLGA hybrid foam bone substitute

  Munar, G. M., Munar, M. L., Tsuru, K., Matsuya, S. & Ishikawa, K., Apr 8 2013, Advances in Bioceramics and Porous Ceramics V - A Collection of Papers Presented at the 36th International Conference on Advanced Ceramics and Composites, ICACC 2012. 6 ed. p. 75-78 4 p. (Ceramic Engineering and Science Proceedings; vol. 33, no. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carboapatite
  • Apatite
  • Bone Substitutes
  • Carbonates
  • Bone

• Fabrication of spherical carbonate apatite using calcium sulfate as a precursor by W/O emulsion method

  Nomura, S., Tsuru, K., Matsuya, S., Takahashi, I. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 78-81 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carboapatite
  • Apatite
  • Calcium Sulfate
  • Carbonates
  • Sulfates
  1 Citation (Scopus)

• Fabrication of βTCP foam using αTCP foam as a precursor by heat treatment

  Nikaido, T., Tsuru, K., Kawachi, G., Munar, M., Matsuya, S., Nakamura, S. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 15-18 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Foams
  • Heat treatment
  • Fabrication
  • Bone
  • Heating
  3 Citations (Scopus)

• Improvement in handling property of αTCP cement

  Maruta, M., Matsuya, S., Tsuru, K. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 202-205 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Acids
  • Glutamic Acid
  • Cements
  • Chelation
  • Calcium phosphate

• Influence of PLGA concentrations on structural and mechanical properties of carbonate apatite foam

  Munar, G. M., Munar, M. L., Tsuru, K. & Ishikawa, K., Jul 31 2013, In: dental materials journal. 32, 4, p. 608-614 7 p.

  Research output: Contribution to journal › Article › peer-review

  • carboapatite
  • Apatite
  • Porosity
  • Carbonates
  • Structural properties
  6 Citations (Scopus)

• Mechanical behavior and cell response of PCL coated α-TCP foam for cancellous-type bone replacement

  Bang, L. T., Tsuru, K., Munar, M., Ishikawa, K. & Othman, R., Jul 1 2013, In: Ceramics International. 39, 5, p. 5631-5637 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Bone
  • Foams
  • Coatings
  • Compressive strength
  • tricalcium phosphate
  13 Citations (Scopus)

• Organic-inorganic composites designed for biomedical applications

  Miyazaki, T., Ishikawa, K., Shirosaki, Y. & Ohtsukid, C., Nov 2013, In: Biological and Pharmaceutical Bulletin. 36, 11, p. 1670-1675 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Ceramics
  • Bone and Bones
  • Bioglass
  • Glass ceramics
  • Apatites
  16 Citations (Scopus)

• Preface

  Ishikawa, K. & Iwamoto, H., Jan 1 2013, In: Key Engineering Materials. 529-530, 1

  Research output: Contribution to journal › Editorial › peer-review

• Preparation of carbonate apatite cement based on α-TCP

  Matsuya, S., Maruta, M., Tsuru, K. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 197-201 5 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carboapatite
  • Apatite
  • Carbonates
  • Cements
  • Powders
  2 Citations (Scopus)

• Protectivity and adhesive strength of zinclipscombite coating on 316L stainless steel

  Valanezhad, A., Tsuru, K., Maruta, M., Matsuya, S. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 251-254 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Austenitic stainless steel
  • Adhesives
  • Coatings
  • Corrosion resistance

• The use of poly (ε-caprolactone) to enhance the mechanical strength of porous Si-substituted carbonate apatite

  Bang, L. T., Kawachi, G., Nakagawa, M., Munar, M., Ishikawa, K. & Othman, R., Oct 5 2013, In: Journal of Applied Polymer Science. 130, 1, p. 426-433 8 p.

  Research output: Contribution to journal › Article › peer-review

  • carboapatite
  • Apatite
  • polycaprolactone
  • Carbonates
  • Strength of materials
  7 Citations (Scopus)
• 2011

  Bioactive ceramics: Cements

  Ishikawa, K., Oct 1 2011, Comprehensive Biomaterials. Elsevier, Vol. 1. p. 267-283 17 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  7 Citations (Scopus)

• Comparison of apatite-coated titanium prepared by blast coating and flame spray methods -Evaluation using simulated body fluid and initial histological study

  Mano, T., Ishikawa, K., Harada, K., Umeda, H. & Ueyama, Y., 2011, In: dental materials journal. 30, 4, p. 431-437 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Apatite
  • Flame spraying
  • Body fluids
  • Apatites
  • Body Fluids
  5 Citations (Scopus)

• Effect of silicon and heat-treatment temperature on the morphology and mechanical properties of silicon - Substituted hydroxyapatite

  Bang, L. T., Ishikawa, K. & Othman, R., Dec 1 2011, In: Ceramics International. 37, 8, p. 3637-3642 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hydroxyapatite
  • Silicon
  • Durapatite
  • Heat treatment
  • Mechanical properties
  40 Citations (Scopus)

• Fabrication of low-crystalline carbonate apatite foam bone replacement based on phase transformation of calcite foam

  Maruta, M., Matsuya, S., Nakamura, S. & Ishikawa, K., 2011, In: dental materials journal. 30, 1, p. 14-20 7 p.

  Research output: Contribution to journal › Article › peer-review

  • carboapatite
  • Apatite
  • Calcite
  • Calcium Carbonate
  • Carbonates
  37 Citations (Scopus)

• Hydrothermal calcium modification of 316L stainless steel and its apatite forming ability in simulated body fluid

  Valanezahad, A., Ishikawa, K., Tsuru, K., Maruta, M. & Matsuya, S., 2011, In: dental materials journal. 30, 5, p. 749-753 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Apatite
  • Body fluids
  • Apatites
  • Stainless Steel
  • Body Fluids
  5 Citations (Scopus)

• Hydroxyapatite coating on titanium via titanium zinc phosphate layer

  Ishikawa, K., Valanezhad, A. & Tsuru, K., Dec 1 2011.

  Research output: Contribution to conference › Paper › peer-review

• Occlusion of dentin tubules with antibacterial ammonium hexafluorosilicate solution for the prevention of dentin caries

  Shibata, S., Suge, T., Ishikawa, K. & Matsuo, T., Jun 1 2011, In: American journal of dentistry. 24, 3, p. 148-152 5 p.

  Research output: Contribution to journal › Article › peer-review

  • hexafluorosilicate
  • Dentin
  • Smear Layer
  • Anti-Bacterial Agents
  • Electron Scanning Microscopy
  5 Citations (Scopus)