Find Research outputs

Search results

• 3D-CFD analysis of diffusion and emission of VOCs in a FLEC cavity

  Zhu, Q., Kato, S., Murakami, S. & Ito, K., Jun 2007, In: Indoor Air. 17, 3, p. 178-188 11 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)

• 3-D CG lighting with an interactive GA

  Aoki, K. & Takagi, H., 1997, International Conference on Knowledge-Based Intelligent Electronic Systems, Proceedings, KES. IEEE, Vol. 1. p. 296-301 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  44 Citations (Scopus)

• 3D characterisation of grain deformation under synchrotron radiation

  Kobayashi, M., Toda, H., Uesugi, K., Takeuchi, A. & Suzuki, Y., Aug 17 2010, PRICM7. p. 2303-2306 4 p. (Materials Science Forum; vol. 654-656).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D co-cultures of keratinocytes and melanocytes and cytoprotective effects on keratinocytes against reactive oxygen species by insect virus-derived protein microcrystals

  Shimabukuro, J., Yamaoka, A., Murata, K. I., Kotani, E., Hirano, T., Nakajima, Y., Matsumoto, G. & Mori, H., Sep 1 2014, In: Materials Science and Engineering C. 42, p. 64-69 6 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• 3-D conical microchannel fabricated by wet etching using Ti/Au sacrificial layer

  Sugiura, H., Sakuma, S. & Arai, F., 2018, 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018. Chemical and Biological Microsystems Society, p. 525-527 3 p. (22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D constrained gravity inversion to model Moho geometry and stagnant slabs of the Northwestern Pacific plate at the Japan Islands

  Farag, T., Sobh, M. & Mizunaga, H., Apr 20 2022, In: Tectonophysics. 829, 229297.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• 3D Coordination polymer of Cd(II) with an imidazolium-based linker showing parallel polycatenation forming channels with aligned imidazolium groups

  Sen, S., Yamada, T., Kitagawa, H. & Bharadwaj, P. K., Mar 5 2014, In: Crystal Growth and Design. 14, 3, p. 1240-1244 5 p.

  Research output: Contribution to journal › Article › peer-review
  34 Citations (Scopus)

• 3D cosmic-ray muon tomography using portable muography detector

  Chaiwongkhot, K., Kin, T., Nagata, Y., Komori, T., Okamoto, N. & Basiri, H., Jan 2022, In: Journal of Instrumentation. 17, 1, P01009.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• 3D creep cavitation characteristics and residual life assessment in high temperature steels: A critical review

  Gupta, C., Toda, H., Mayr, P. & Sommitsch, C., Mar 1 2015, In: Materials Science and Technology (United Kingdom). 31, 5, p. 603-626 24 p.

  Research output: Contribution to journal › Review article › peer-review
  5 Citations (Scopus)

• 3D critical slope stability analysis based on GIS spatial database and Monte Carlo Simulation

  Esaki, T., Xie, M., Zhou, G. & Mitani, Y., Jan 1 2001, DC Rocks 2001 - 38th U.S. Symposium on Rock Mechanics (USRMS). Elsworth, Tinucci & Heasley (eds.). American Rock Mechanics Association (ARMA), p. 1137-1143 7 p. (DC Rocks 2001 - 38th U.S. Symposium on Rock Mechanics (USRMS)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• 3-D display of the wall motion for regional cardiac muscle from ultrasonic B-mode image -Wall motion of thickness, thickening rate using contour of inner and outer wall

  Yang, S., Tsuruoka, S., Shinogi, T., Kawanaka, H., Oyama, W., Kimura, F., Wakabayashi, T. & Sekioka, K., Dec 1 2006, p. 6-12. 7 p.

  Research output: Contribution to conference › Paper › peer-review

• 3-D eddy current computation for a transformer tank

  Kanayama, H., Shioya, R., Tagami, D. & Matsumoto, S., Oct 9 2002, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 21, 4, p. 554-562 9 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)

• 3deecelltracker, a deep learning-based pipeline for segmenting and tracking cells in 3d time lapse images

  Wen, C., Miura, T., Voleti, V., Yamaguchi, K., Tsutsumi, M., Yamamoto, K., Otomo, K., Fujie, Y., Teramoto, T., Ishihara, T., Aoki, K., Nemoto, T., Hillman, E. M. C. & Kimura, K. D., Mar 2021, In: eLife. 10, e59187.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  18 Citations (Scopus)

• 3D effects on measured results using a 2D model in a narrow wave channel

  Kashiwagi, M. & Hu, C., Jun 2010, In: International Journal of Offshore and Polar Engineering. 20, 2, p. 88-94 7 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• 3D Endoscope System Using Asynchronously Blinking Grid Pattern Projection for HDR Image Synthesis

  Furukawa, R., Naito, M., Miyazaki, D., Baba, M., Hiura, S., Sanomura, Y., Tanaka, S. & Kawasaki, H., 2017, Computer Assisted and Robotic Endoscopy and Clinical Image-Based Procedures - 4th International Workshop, CARE 2017 and 6th International Workshop, CLIP 2017 Held in Conjunction with MICCAI 2017, Proceedings. Arbel, T. & Cardoso, M. J. (eds.). Springer Verlag, p. 16-28 13 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10550 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• 3D endoscope system using DOE projector

  Furukawa, R., Sanomura, Y., Tanaka, S., Yoshida, S., Sagawa, R., Visentini-Scarzanella, M. & Kawasaki, H., Oct 13 2016, 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016. Institute of Electrical and Electronics Engineers Inc., p. 2091-2094 4 p. 7591140. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; vol. 2016-October).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  14 Citations (Scopus)

• 3D endoscope system with AR display superimposing dense and wide-angle-of-view 3D points obtained by using micro pattern projector

  Mikamo, M., Furukawa, R., Oka, S., Kotachi, T., Okamoto, Y., Tanaka, S., Sagawa, R. & Kawasaki, H., 2022, 44th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2022. Institute of Electrical and Electronics Engineers Inc., p. 881-885 5 p. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; vol. 2022-July).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• 3D finite difference time domain simulation of microwave propagation in a coaxial cable

  Yousefian, A. & Yamamoto, N., Sep 2018, In: Evergreen. 5, 3, p. 1-11 11 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• 3D fluorescence imaging using optical clearing agents

  Imai, T., Jan 1 2015, In: Seikagaku. 87, 2, p. 225-229 5 p.

  Research output: Contribution to journal › Article › peer-review

• 3D fracture behaviours in dual-phase stainless steel

  Toda, H., Tomizato, F., Harasaki, R., Seo, D., Kobayashi, M., Takeuchi, A. & Uesugi, K., 2016, In: isij international. 56, 5, p. 883-892 10 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• 3-D Free-Form Object Description and Modeling Using Real Range Image

  Hara, K., Zha, H. & Hasegawa, T., 1998, In: 4th Japan-France / 2nd Asia-Europe Congress on Mechatronics. 3, p. 578-583 6 p.

  Research output: Contribution to journal › Article › peer-review
  94 Citations (Scopus)

• 3D gelatin-chitosan hybrid hydrogels combined with human platelet lysate highly support human mesenchymal stem cell proliferation and osteogenic differentiation

  Re, F., Sartore, L., Moulisova, V., Cantini, M., Almici, C., Bianchetti, A., Chinello, C., Dey, K., Agnelli, S., Manferdini, C., Bernardi, S., Lopomo, N. F., Sardini, E., Borsani, E., Rodella, L. F., Savoldi, F., Paganelli, C., Guizzi, P., Lisignoli, G., Magni, F., & 2 othersSalmeron-Sanchez, M. & Russo, D., Apr 1 2019, In: Journal of Tissue Engineering. 10

  Research output: Contribution to journal › Article › peer-review

  Open Access
  41 Citations (Scopus)

• 3D generation and reconstruction of the fuel cell catalyst layer using 2D images based on deep learning

  Liu, X., Park, K., So, M., Ishikawa, S., Terao, T., Shinohara, K., Komori, C., Kimura, N., Inoue, G. & Tsuge, Y., Mar 2022, In: Journal of Power Sources Advances. 14, 100084.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• 3D geometry of a plate boundary fault related to the 2016 Off-Mie earthquake in the Nankai subduction zone, Japan

  Tsuji, T., Minato, S., Kamei, R., Tsuru, T. & Kimura, G., Nov 15 2017, In: Earth and Planetary Science Letters. 478, p. 234-244 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  18 Citations (Scopus)

• 3D global analysis of CZ-Si growth in a transverse magnetic field with rotating crucible and crystal

  Liu, L. & Kakimoto, K., Apr 2005, In: Crystal Research and Technology. 40, 4-5, p. 347-351 5 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• 3D global analysis of CZ-Si growth in a transverse magnetic field with various crystal growth rates

  Liu, L. & Kakimoto, K., Feb 15 2005, In: Journal of Crystal Growth. 275, 1-2, p. e1521-e1526

  Research output: Contribution to journal › Conference article › peer-review
  16 Citations (Scopus)

• 3D Global Heat Transfer Model on Floating Zone for Silicon Single Crystal Growth

  Han, X. F., Liu, X., Nakano, S., Harada, H., Miyamura, Y. & Kakimoto, K., May 1 2018, In: Crystal Research and Technology. 53, 5, 1700246.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• 3D gravity inversion using tikhonov regularization

  Toushmalani, R. & Saibi, H., Aug 1 2015, In: Acta Geophysica. 63, 4, p. 1044-1065 22 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)

• 3-D high-density strain mapping procedure based on high-resolution CT

  Kobayashi, M., Toda, H., Ohgaki, T., Uesugi, K., Wilkinson, D. S., Kobayashi, T., Kawai, Y. & Aoki, Y., 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 3 ed. Trans Tech Publications Ltd, p. 2377-2382 6 p. (Materials Science Forum; vol. 539-543, no. PART 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• 3-D honeycomb NiCo ₂ S ₄ with high electrochemical performance used for supercapacitor electrodes

  Zhang, Z., Huang, X., Li, H., Zhao, Y. & Ma, T., Apr 1 2017, In: Applied Surface Science. 400, p. 238-244 7 p.

  Research output: Contribution to journal › Article › peer-review
  34 Citations (Scopus)

• 3D image analysis for evaluating internal deformation/fracture characteristics of materials

  Nakazawa, M., Aoki, Y., Kobayashi, M. & Toda, H., 2008, 2008 19th International Conference on Pattern Recognition, ICPR 2008. Institute of Electrical and Electronics Engineers Inc., 4761648. (Proceedings - International Conference on Pattern Recognition).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D image analysis for evaluating internal deformation/fracture characteristics of materials

  Nakazawa, M., Aoki, Y., Toda, H. & Kobayashi, M., Dec 1 2008, In: Electronics and Communications in Japan, Part II: Electronics (English translation of Denshi Tsushin Gakkai Ronbunshi). 91, 12, p. 16-23 8 p.

  Research output: Contribution to journal › Article › peer-review

• 3D image analysis for evaluating internal deformation / fracture characteristics of materials

  Nakazawa, M., Aoki, Y., Toda, H., Kobayashi, M. & Kawai, Y., Dec 1 2007, Optomechatronic Computer-Vision Systems II. 67180C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6718).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• 3D image analysis for evaluating internal deformation / fracture characteristics of materials

  Nakazawa, M., Aoki, Y., Kawai, Y., Kobayashi, M. & Toda, H., Dec 1 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. p. 3525-3530 6 p. 4153571. (IECON Proceedings (Industrial Electronics Conference)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D image analysis for evaluating internal deformation / Fracture characteristics of materials

  Nakazawa, M., Aoki, Y., Toda, H. & Kobayashi, M., Jan 1 2007, In: IEEJ Transactions on Electronics, Information and Systems. 127, 6, p. 824-830+2

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• 3D image-based analyses of fatigue crack propagation in an Al-Mg-Si alloy

  Qu, P., Toda, H., Zhang, H., Qian, L., Sakaguchi, M., Kobayashi, M. & Uesugi, K., 2008, Materials Science and Technology Conference and Exhibition MS and T'08. p. 600-609 10 p. (Materials Science and Technology Conference and Exhibition, MS and T'08; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3-D image-based mechanical simulation of aluminium foams: Effects of internal microstructure

  Toda, H., Takata, M., Ohgaki, T., Kobayashi, M., Kobayashi, T., Uesugi, K., Makii, K. & Aruga, Y., Jun 1 2006, In: Advanced Engineering Materials. 8, 6, p. 459-467 9 p.

  Research output: Contribution to journal › Review article › peer-review
  21 Citations (Scopus)

• 3D image-based modeling of ductile fracture in an aluminum alloy using synchrotron X-ray CT images

  Qian, L., Toda, H., Uesugi, K., Kobayashi, M. & Kobayashi, T., Jan 1 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 1 ed. Trans Tech Publications Ltd, p. 263-266 4 p. (Materials Science Forum; vol. 561-565, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• 3D Image Reconstruction from Multi-focus Microscopic Images

  Yamaguchi, T., Nagahara, H., Morooka, K., Nakashima, Y., Uranishi, Y., Miyauchi, S. & Kurazume, R., Jan 1 2020, Image and Video Technology - PSIVT 2019 International Workshops, Revised Selected Papers. Dabrowski, J. J., Rahman, A. & Paul, M. (eds.). Springer, p. 73-85 13 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11994 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D imaging archaeological tomb by vertical electric soundings

  Ushijima, K., Mizunaga, H., Tanaka, T. & Miyamoto, K., 2005, 18th Symposium on the Application of Geophysics to Engineering and Environmental Problems, SAGEEP 2005: Geophysical Solutions for Today's Challenges. J and N Group, Ltd., p. 856-861 6 p. (Proceedings of the Symposium on the Application of Geophyics to Engineering and Environmental Problems, SAGEEP; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3d Imaging for Thermal Cameras Using Structured Light

  Erdozain, J., Ichimaru, K., Maeda, T., Kawasaki, H., Raskar, R. & Kadambi, A., Oct 2020, 2020 IEEE International Conference on Image Processing, ICIP 2020 - Proceedings. IEEE Computer Society, p. 2795-2799 5 p. 9191297. (Proceedings - International Conference on Image Processing, ICIP; vol. 2020-October).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• 3D imaging of archaeological tomb by electrical resistivity techniques

  Mizunaga, H., Tanaka, T. & Ushijima, K., 2006, 19th Symposium on the Application of Geophysics to Engineering and Environmental Problems, SAGEEP 2006: Geophysical Applications for Environmental and Engineering Hazzards - Advances and Constraints. Environmental and Engineering Geophysical Society (EEGS), p. 1374-1377 4 p. (19th Symposium on the Application of Geophysics to Engineering and Environmental Problems, SAGEEP 2006: Geophysical Applications for Environmental and Engineering Hazzards - Advances and Constraints; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• 3-dimensional imaging of dislocation microstructures by electron beams

  Barnard, J. S., Sharp, J. H., Hata, S., Mitsuhara, M., Kaneko, K. & Higashida, K., 2012, Three-Dimensional Tomography of Materials. p. 30-40 11 p. (Materials Research Society Symposium Proceedings; vol. 1421).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3-dimensional object model construction from range images taken by a range finder on a mobile robot

  Okada, N., Zha, H., Nagata, T., Kondo, E. & Morooka, K., 1998, Innovations in Theory, Practice and Applications. Anon (ed.). IEEE, Vol. 3. p. 1853-1858 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• 3-dimensional profile measurement using virtual slit Moiré method by line laser

  Yoshitomi, K., Onikura, H. & Sajima, T., 2000, In: Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 66, 3, p. 441-445 5 p.

  Research output: Contribution to journal › Article › peer-review

• 3-Dimensional SPECT/CT Fusion Imaging-Guided Balloon Pulmonary Angioplasty for Chronic Thromboembolic Pulmonary Hypertension

  Hosokawa, K., Abe, K., Kashihara, S. & Tsutsui, H., Oct 23 2017, In: JACC: Cardiovascular Interventions. 10, 20, p. e193-e194

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• 3D implemented SRAM/DRAM hybrid cache architecture for high-performance and low power consumption

  Inoue, K., Hashiguchi, S., Ueno, S., Fukumoto, N. & Murakami, K., Oct 13 2011, 54th IEEE International Midwest Symposium on Circuits and Systems, MWSCAS 2011. 6026484. (Midwest Symposium on Circuits and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• 3-D Intrinsic and Scattering Seismic Attenuation Structures Beneath Kyushu, Japan

  Shito, A., Matsumoto, S., Ohkura, T., Shimizu, H., Sakai, S., Iio, Y., Takahashi, H., Yakiwara, H., Watanabe, T., Kosuga, M., Okada, T., Yoshimi, M. & Asano, Y., Aug 1 2020, In: Journal of Geophysical Research: Solid Earth. 125, 8, e2019JB018742.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• 3D laser measurement system for large scale architectures using multiple mobile robots

  Kurazume, R., Tobata, Y., Iwashita, Y. & Hasegawa, T., Dec 1 2007, Proceedings - 6th International Conference on 3-D Digital Imaging and Modeling, 3DIM 2007. p. 91-98 8 p. 4296743. (3DIM 2007 - Proceedings 6th International Conference on 3-D Digital Imaging and Modeling).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  19 Citations (Scopus)

• 3-D magnetic inversion and satellite imagery for the Um Salatit gold occurrence, Central Eastern Desert, Egypt

  Mohamed, H., Saibi, H., Bersi, M., Abdelnabi, S., Geith, B., Ismaeil, H., Tindell, T. D. & Mizunaga, H., Nov 1 2018, In: Arabian Journal of Geosciences. 11, 21, 674.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)