Find Research Outputs — Kyushu University

Fabrication of interconnected porous calcium-deficient hydroxyapatite using the setting reaction of α tricalcium phosphate spherical granules

Arifta, T. I., Munar, M. L., Tsuru, K. & Ishikawa, K., Oct 1 2017, In: Ceramics International. 43, 14, p. 11149-11155 7 p.

Research output: Contribution to journal › Article › peer-review

14 Citations (Scopus)

Fabrication of interconnected porous β-tricalcium phosphate (β-TCP) based on a setting reaction of β-TCP granules with HNO₃ followed by heat treatment

Ishikawa, K., Putri, T. S., Tsuchiya, A., Tanaka, K. & Tsuru, K., Mar 2018, In: Journal of Biomedical Materials Research - Part A. 106, 3, p. 797-804 8 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Fabrication of low-crystalline carbonate apatite foam bone replacement based on phase transformation of calcite foam

Maruta, M., Matsuya, S., Nakamura, S. & Ishikawa, K., 2011, In: dental materials journal. 30, 1, p. 14-20 7 p.

Research output: Contribution to journal › Article › peer-review

36 Citations (Scopus)

Fabrication of octacalcium phosphate block through a dissolution-precipitation reaction using a calcium sulphate hemihydrate block as a precursor

Sugiura, Y., Munar, M. L. & Ishikawa, K., Oct 1 2018, In: Journal of Materials Science: Materials in Medicine. 29, 10, 151.

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Fabrication of octacalcium phosphate foam through phase conversion and its histological evaluation

Sugiura, Y., Munar, M. L. & Ishikawa, K., Feb 1 2018, In: Materials Letters. 212, p. 28-31 4 p.

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Fabrication of porous calcite using chopped nylon fiber and its evaluation using rats

Ishikawa, K., Tram, N. X. T., Tsuru, K. & Toita, R., Jan 1 2015, In: Journal of Materials Science: Materials in Medicine. 26, 2

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Fabrication of self-setting β-TCP granular cement using β-TCP granules and sodium hydrogen sulfate solution

Eddy, Tsuchiya, A., Tsuru, K. & Ishikawa, K., Nov 1 2018, In: Journal of Biomaterials Applications. 33, 5, p. 630-636 7 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Fabrication of self-setting β-tricalcium phosphate granular cement

Fukuda, N., Tsuru, K., Mori, Y. & Ishikawa, K., Feb 1 2018, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 106, 2, p. 800-807 8 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Fabrication of spherical carbonate apatite using calcium sulfate as a precursor by W/O emulsion method

Nomura, S., Tsuru, K., Matsuya, S., Takahashi, I. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 78-81 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Fabrication of strongly attached hydroxyapatite coating on titanium by hydrothermal treatment of Ti–Zn–PO₄ coated titanium in CaCl₂ solution

Valanezhad, A., Tsuru, K. & Ishikawa, K., Jul 25 2015, In: Journal of Materials Science: Materials in Medicine. 26, 7, 212.

Research output: Contribution to journal › Article › peer-review

10 Citations (Scopus)

Fabrication of β-TCP foam: Effects of magnesium oxide as phase stabilizer on its properties

Nikaido, T., Tsuru, K., Munar, M., Maruta, M., Matsuya, S., Nakamura, S. & Ishikawa, K., May 7 2015, In: Ceramics International. 41, 10, p. 14245-14250 6 p.

Research output: Contribution to journal › Article › peer-review

14 Citations (Scopus)

Fabrication of βTCP foam using αTCP foam as a precursor by heat treatment

Nikaido, T., Tsuru, K., Kawachi, G., Munar, M., Matsuya, S., Nakamura, S. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 15-18 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

Feasibility evaluation of low-crystallinity β-tricalcium phosphate blocks as a bone substitute fabricated by a dissolution–precipitation reaction from α-tricalcium phosphate blocks

Tripathi, G., Sugiura, Y., Kareiva, A., Garskaite, E., Tsuru, K. & Ishikawa, K., Aug 1 2018, In: Journal of Biomaterials Applications. 33, 2, p. 259-270 12 p.

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Fluoride activity of antibacterial ammonium hexafluorosilicate solution for the prevention of dentin caries

Suge, T., Shibata, S., Ishikawa, K. & Matsuo, T., Apr 2018, In: American journal of dentistry. 31, 2, p. 103-106 4 p.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Histological Comparison in Rats between Carbonate Apatite Fabricated from Gypsum and Sintered Hydroxyapatite on Bone Remodeling

Ayukawa, Y., Suzuki, Y., Tsuru, K., Koyano, K. & Ishikawa, K., 2015, In: BioMed Research International. 2015, 579541.

Research output: Contribution to journal › Article › peer-review

19 Citations (Scopus)

Hydrothermal calcium modification of 316L stainless steel and its apatite forming ability in simulated body fluid

Valanezahad, A., Ishikawa, K., Tsuru, K., Maruta, M. & Matsuya, S., 2011, In: dental materials journal. 30, 5, p. 749-753 5 p.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Hydrothermal conversion of calcite foam to carbonate apatite

Tram, N. X. T., Maruta, M., Tsuru, K., Matsuya, S. & Ishikawa, K., 2014, Advances in Bioceramics and Porous Ceramics VI - A Collection of Papers Presented at the 37th International Conference on Advanced Ceramics and Composites, ICACC 2013. 6 ed. Vol. 34. p. 59-65 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Hydrothermal treatment for TiN as abrasion resistant dental implant coating and its fibroblast response

Shi, X., Xu, L., Munar, M. L. & Ishikawa, K., Apr 1 2015, In: Materials Science and Engineering C. 49, p. 1-6 6 p.

Research output: Contribution to journal › Article › peer-review

34 Citations (Scopus)

Hydroxyapatite coating on titanium via titanium zinc phosphate layer

Ishikawa, K., Valanezhad, A. & Tsuru, K., Dec 1 2011.

Research output: Contribution to conference › Paper › peer-review

Immobilization of calcium and phosphate ions improves the osteoconductivity of titanium implants

Sunarso, Toita, R., Tsuru, K. & Ishikawa, K., Nov 1 2016, In: Materials Science and Engineering C. 68, p. 291-298 8 p.

Research output: Contribution to journal › Article › peer-review

24 Citations (Scopus)

Improvement in handling property of αTCP cement

Maruta, M., Matsuya, S., Tsuru, K. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 202-205 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Increased pre-osteoblast bioactivity on ca-modified titanium

Sunarso, C., Toita, R., Tsuru, K. & Ishikawa, K., Jan 1 2016, Bioceramics 27. Ana, I. D. & Triyana, K. (eds.). Trans Tech Publications Ltd, p. 157-160 4 p. (Key Engineering Materials; vol. 696).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Influence of PLGA concentrations on structural and mechanical properties of carbonate apatite foam

Munar, G. M., Munar, M. L., Tsuru, K. & Ishikawa, K., Jul 31 2013, In: dental materials journal. 32, 4, p. 608-614 7 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

In vivo stability evaluation of Mg substituted low crystallinity ß-tricalcium phosphate granules fabricated through dissolution-precipitation reaction for bone regeneration

Tripathi, G., Sugiura, Y., Tsuru, K. & Ishikawa, K., Aug 15 2018, In: Biomedical Materials (Bristol). 13, 6, 065002.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Mechanical behavior and cell response of PCL coated α-TCP foam for cancellous-type bone replacement

Bang, L. T., Tsuru, K., Munar, M., Ishikawa, K. & Othman, R., Jul 1 2013, In: Ceramics International. 39, 5, p. 5631-5637 7 p.

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

Mechanical strength improvement of apatite cement using hydroxyapatite/collagen nanocomposite

Cahyanto, A., Tsuru, K., Ishikawa, K. & Kikuchi, M., 2017, Multifunctional Bioceramics for Innovative Therapy. El-Ghannam, A. (ed.). Trans Tech Publications Ltd, p. 167-172 6 p. (Key Engineering Materials; vol. 720).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

8 Citations (Scopus)

Micro-CT evaluation on osteoconductivity of DCPD-coated β-TCP granule using experimental rats

Shariff, K. A., Tsuru, K. & Ishikawa, K., Oct 10 2018, In: Journal of Physics: Conference Series. 1082, 1, 012069.

Research output: Contribution to journal › Conference article › peer-review

Modulation of the osteoconductive property and immune response of poly(ether ether ketone) by modification with calcium ions

Toita, R., Sunarso, Rashid, A. N., Tsuru, K. & Ishikawa, K., 2015, In: Journal of Materials Chemistry B. 3, 44, p. 8738-8746 9 p.

Research output: Contribution to journal › Article › peer-review

15 Citations (Scopus)

Nanoporous biomaterials for uremic toxin adsorption in artificial kidney systems: A review

Cheah, W. K., Ishikawa, K., Othman, R. & Yeoh, F. Y., Jul 2017, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 105, 5, p. 1232-1240 9 p.

Research output: Contribution to journal › Review article › peer-review

27 Citations (Scopus)

Occlusion of dentin tubules with antibacterial ammonium hexafluorosilicate solution for the prevention of dentin caries

Shibata, S., Suge, T., Ishikawa, K. & Matsuo, T., Jun 1 2011, In: American journal of dentistry. 24, 3, p. 148-152 5 p.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Organic-inorganic composites designed for biomedical applications

Miyazaki, T., Ishikawa, K., Shirosaki, Y. & Ohtsukid, C., Nov 2013, In: Biological and Pharmaceutical Bulletin. 36, 11, p. 1670-1675 6 p.

Research output: Contribution to journal › Article › peer-review

16 Citations (Scopus)

Osteoconductivity and bioresorption of an interconnecting porous carbonate apatite with enhanced mechanical strength

Tram, N. X. T., Maruta, M., Tusru, K., Matsuya, S. & Ishikawa, K., Jan 1 2016, Bioceramics 27. Ana, I. D. & Triyana, K. (eds.). Trans Tech Publications Ltd, p. 23-26 4 p. (Key Engineering Materials; vol. 696).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Partial oxidation of TiN coating by hydrothermal treatment and ozone treatment to improve its osteoconductivity

Shi, X., Xu, L., Le, T. B., Zhou, G., Zheng, C., Tsuru, K. & Ishikawa, K., Feb 1 2016, In: Materials Science and Engineering C. 59, p. 542-548 7 p.

Research output: Contribution to journal › Article › peer-review

25 Citations (Scopus)

Physical and histological comparison of hydroxyapatite, carbonate apatite, and β-tricalcium phosphate bone substitutes

Ishikawa, K., Miyamoto, Y., Tsuchiya, A., Hayashi, K., Tsuru, K. & Ohe, G., Oct 16 2018, In: Materials. 11, 10, 1993.

Research output: Contribution to journal › Article › peer-review

19 Citations (Scopus)

Preface

Ishikawa, K. & Iwamoto, H., Jan 1 2013, In: Key Engineering Materials. 529-530, 1

Research output: Contribution to journal › Editorial › peer-review

Preparation of carbonate apatite cement based on α-TCP

Matsuya, S., Maruta, M., Tsuru, K. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 197-201 5 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres

Arifta, T. I., Munar, M. L., Tsuru, K. & Ishikawa, K., Jan 1 2016, Bioceramics 27. Ana, I. D. & Triyana, K. (eds.). Trans Tech Publications Ltd, p. 57-59 3 p. (Key Engineering Materials; vol. 696).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Preventive effects of a phospholipid polymer coating on PMMA on biofilm formation by oral streptococci

Shibata, Y., Yamashita, Y., Tsuru, K., Ishihara, K., Fukazawa, K. & Ishikawa, K., Dec 30 2016, In: Applied Surface Science. 390, p. 602-607 6 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Protectivity and adhesive strength of zinclipscombite coating on 316L stainless steel

Valanezhad, A., Tsuru, K., Maruta, M., Matsuya, S. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 251-254 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Regulation of DCPD formation on β-TCP granular surface by exposing different concentration of acidic calcium phosphate solution

Shariff, K. A., Tsuru, K. & Ishikawa, K., Jan 1 2016, Bioceramics 27. Ana, I. D. & Triyana, K. (eds.). Trans Tech Publications Ltd, p. 27-31 5 p. (Key Engineering Materials; vol. 696).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Setting reaction of α-TCP spheres and an acidic calcium phosphate solution for the fabrication of fully interconnected macroporous calcium phosphate

Kien, P. T., Ishikawa, K. & Tsuru, K., Dec 1 2015, In: Ceramics International. 41, 10, p. 13525-13531 7 p.

Research output: Contribution to journal › Article › peer-review

18 Citations (Scopus)

Synergistic effect of surface phosphorylation and micro-roughness on enhanced osseointegration ability of poly(ether ether ketone) in the rabbit tibia

Fukuda, N., Kanazawa, M., Tsuru, K., Tsuchiya, A., Sunarso, Toita, R., Mori, Y., Nakashima, Y. & Ishikawa, K., Dec 1 2018, In: Scientific reports. 8, 1, 16887.

Research output: Contribution to journal › Article › peer-review

10 Citations (Scopus)

Synthesis and Characterization of Bioactive Quaternary Silicate Gel-glasses

Swe, T. T., Mohamad, H., Shariff, K. A., Noor, A. F. M., Ishikawa, K. & Thant, A. A., Oct 10 2018, In: Journal of Physics: Conference Series. 1082, 1, 012070.

Research output: Contribution to journal › Conference article › peer-review

2 Citations (Scopus)

Synthesis of carbonate apatite foam using β-TCP foams as precursors

Tsuru, K., Nikaido, T., Munar, M. L., Maruta, M., Matsuya, S., Nakamura, S. & Ishikawa, K., Jan 1 2014, In: Key Engineering Materials. 587, p. 52-55 4 p.

Research output: Contribution to journal › Conference article › peer-review

9 Citations (Scopus)

The use of poly (ε-caprolactone) to enhance the mechanical strength of porous Si-substituted carbonate apatite

Bang, L. T., Kawachi, G., Nakagawa, M., Munar, M., Ishikawa, K. & Othman, R., Oct 5 2013, In: Journal of Applied Polymer Science. 130, 1, p. 426-433 8 p.

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Three-dimensional porous carbonate apatite with sufficient mechanical strength as a bone substitute material

Nguyen Xuan Thanh, T., Maruta, M., Tsuru, K., Matsuya, S. & Ishikawa, K., Jan 1 2014, 11th International Fatigue Congress. Trans Tech Publications, p. 1559-1564 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

6 Citations (Scopus)

Transformation of apatite cement to B-Type carbonate apatite using different atmosphere

Cahyanto, A., Tsuru, K. & Ishikawa, K., Jan 1 2016, Bioceramics 27. Ana, I. D. & Triyana, K. (eds.). Trans Tech Publications Ltd, p. 9-13 5 p. (Key Engineering Materials; vol. 696).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

13 Citations (Scopus)

“Fabrication of arbitrarily shaped carbonate apatite foam based on the interlocking process of dicalcium hydrogen phosphate dihydrate”

Sugiura, Y., Tsuru, K. & Ishikawa, K., Aug 1 2017, In: Journal of Materials Science: Materials in Medicine. 28, 8, 122.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Filters for Research Output

Search results