Find Research outputs

Search results

• Conference contribution

  Fabrication of carbonate apatite-PLGA hybrid foam bone substitute

  Munar, G. M., Munar, M. L., Tsuru, K., Matsuya, S. & Ishikawa, K., Apr 8 2013, Advances in Bioceramics and Porous Ceramics V - A Collection of Papers Presented at the 36th International Conference on Advanced Ceramics and Composites, ICACC 2012. 6 ed. p. 75-78 4 p. (Ceramic Engineering and Science Proceedings; vol. 33, no. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of carbon-based field emitters using a stamp technology

  Baba, A., Hizukuri, M., Iwamoto, M. & Asano, T., Jan 1 1999, 1999 International Microprocesses and Nanotechnology Conference. Institute of Electrical and Electronics Engineers Inc., p. 182-183 2 p. 797537. (1999 International Microprocesses and Nanotechnology Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of circulator with coplaner wave guide structuire

  Oshiro, K., Mikami, H., Fujii, S., Tanaka, T., Fujimori, H., Matsuura, M. & Yamamoto, S., Dec 12 2005, INTERMAG ASIA 2005: Digests of the IEEE International Magnetics Conference. 1 p. (INTERMAG ASIA 2005: Digests of the IEEE International Magnetics Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of current-perpendicular-to-plane junctions based on Fe ₃Si/FeSi₂ multilayered films by lift-off

  Noda, Y., Sakai, K., Sonoda, T., Tsumagari, D., Takeda, K. & Yoshitake, T., 2013, Magnetic Materials, Processes, and Devices 12. 10 ed. Electrochemical Society Inc., p. 223-228 6 p. (ECS Transactions; vol. 50, no. 10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of deep-sub-millimeter-thick compacts using spark plasma sintering

  Tanaka, T., Ohashi, T., Oshiro, K., Fujimori, H., Kurisu, H., Matsuura, M. & Yamamoto, S., 2007, Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006). PART 1 ed. Trans Tech Publications Ltd, p. 521-524 4 p. (Materials Science Forum; vol. 534-536, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of ebc system with oxide eutectic structure

  Ueno, S., Seya, K. & Jang, B., Jan 1 2016, Advanced and Refractory Ceramics for Energy Conservation and Efficiency. American Ceramic Society, p. 65-72 8 p. (Ceramic Transactions; vol. 256).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of functional photonic crystal by multi-photon induced photopolymerization

  Yokoyama, S., Nakahama, T., Hideki, Miki & Mashiko, S., 2005, 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan. 1 ed. Vol. 54. p. 1371 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of gated carbon black field electron emitter using inkjet printing

  Baba, A., Ishida, Y., Hakiai, K. & Asano, T., 2005, Technical Digest of the 18th International Vacuum Nanoelectronics Conference, IVNC 2005. Vol. 2005. p. 42-43 2 p. 1619475

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of gated cold cathode using standing thin film induced by ion-beam bombardment

  Yoshida, T., Baba, A. & Asano, T., Dec 1 2005, Technical Digest of the 18th International Vacuum Nanoelectronics Conference, IVNC 2005. p. 38-39 2 p. 1619473. (Technical Digest of the 18th International Vacuum Nanoelectronics Conference, IVNC 2005; vol. 2005).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of gated field emitter from wedge array prepared by stamp technology

  Baba, A., Tsubaki, K., Iwamoto, M. & Asano, T., 2000, Digest of Papers - 2000 International Microprocesses and Nanotechnology Conference, MNC 2000. Institute of Electrical and Electronics Engineers Inc., p. 128-129 2 p. 872655

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of Ge-on-Insulator by Epitaxial Growth and Ion-Implanted Exfoliation for Electronics and Optoelectronics Applications

  Yamamoto, K., Wang, D. & Nakashima, H., 2021, 240th ECS Meeting - Semiconductor Process Integration 12. 4 ed. IOP Publishing Ltd., p. 157-166 10 p. 157. (ECS Transactions; vol. 104, no. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of heterojunction diodes comprising nitrogen-doped ultrananocrystalline diamond/hydrogenated amorphous carbon and p-type silicon

  Zkria, A., Gima, H., Al-Riyami, S. & Yoshitake, T., 2015, Diamond Electronics and Biotechnology - Fundamentals to Applications. Moran, D. A. J., Swain, G. M., Cheng, C-L. & Nemanich, R. J. (eds.). Materials Research Society, p. 46-51 6 p. (Materials Research Society Symposium Proceedings; vol. 1734).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of high-k gate dielectrics using plasma oxidation and subsequent annealing of Hf/Sio₂/Si structure

  Nakashima, H., Sugimoto, Y., Suehiro, Y., Yamamoto, K., Kajiwara, M., Hirayama, K. & Wang, D., 2008, ICSICT 2008 - 2008 9th International Conference on Solid-State and Integrated-Circuit Technology Proceedings. p. 780-783 4 p. 4734660. (International Conference on Solid-State and Integrated Circuits Technology Proceedings, ICSICT).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of InP/SiC structure using surface activated direct bonding

  Fan, Y., Maekawa, T., Watanabe, K. & Takigawa, R., Oct 5 2021, 2021 7th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2021. Institute of Electrical and Electronics Engineers Inc., p. 46 1 p. (2021 7th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of laterally-configured resistive switching device with spin-polarized nano-gap electrodes

  Kawakita, M., Okabe, K., Yakata, S. & Kimura, T., Jan 1 2015, 2015 IEEE International Magnetics Conference, INTERMAG 2015. Institute of Electrical and Electronics Engineers Inc., 7156918

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of layered niobium oxysulfide and investigation of structural and elemental composition

  Izawa, K., Ida, S., Unal, U., Yamaguchi, T. & Matsumoto, Y., 2006, Solid-State Chemistry of Inorganic Materials VI. Materials Research Society, p. 189-193 5 p. (Materials Research Society Symposium Proceedings; vol. 988).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of layer structured ZnO nanowire by nanoparticle-assisted pulsed laser deposition for optoelectronic application

  Nakamura, D., Kumeda, A., Toya, K., Okazaki, K., Kubo, K., Tsuta, K., Higashihata, M. & Okada, T., Mar 21 2011, Synthesis and Photonics of Nanoscale Materials VIII. 792203. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7922).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of Micro-Cantilever with A Silicon Probe Prepared by Anodization

  Higa, K. & Asano, T., 1998, Digest of Papers - Microprocesses and Nanotechnology 1998: 1998 International Microprocesses and Nanotechnology Conference. Yoo, H. J., Okazaki, S., Ahn, J., Kim, O. & Komuro, M. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 178-179 2 p. 730032. (Digest of Papers - Microprocesses and Nanotechnology 1998: 1998 International Microprocesses and Nanotechnology Conference; vol. 1998-July).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of micro field emitter tip using ion-beam irradiation-induced self-standing of thin film

  Yoshida, T., Baba, A. & Asano, T., Dec 1 2004, Digest of Papers - Microprocesses and Nanotechnology 2004. p. 328-329 2 p. (Digest of Papers - Microprocesses and Nanotechnology 2004).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of nanoparticles of oxide materials by UV pulsed laser ablation in gas phase

  Suzuki, R., Koike, R., Katayama, K., Higashihata, M., Ikenoue, H. & Nakamura, D., 2021, Laser-Based Micro- and Nanoprocessing XV. Klotzbach, U., Watanabe, A. & Kling, R. (eds.). SPIE, 116741G. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11674).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of nanopores utilizing SiC/Si(001) heteroepitaxial growth on SOI substrates: Nanopore density control

  Yahaya, H., Ikoma, Y., Kuriyama, K. & Motooka, T., Mar 30 2011, Seventh International Conference on Thin Film Physics and Applications. 799520. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7995).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of nanotubular membrane electrode assembly for a solid oxide fuel cell

  Motoyama, M., Chao, C. C., Gür, T. M. & Prinz, F. B., 2010, Solid State Ionic Devices 8 - NEMCA. 40 ed. Electrochemical Society Inc., p. 129-139 11 p. (ECS Transactions; vol. 33, no. 40).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of no-bias MMI-MZI modulator based on EO polymer

  Sato, H., Yamamoto, K. & Yokoyama, S., Feb 23 2016, MOC 2015 - Technical Digest of 20th Microoptics Conference. Institute of Electrical and Electronics Engineers Inc., 7416514. (MOC 2015 - Technical Digest of 20th Microoptics Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of n-type nanocrystalline diamond/3C-SiC/p-Si(001) junctions

  Goto, M., Koga, A., Yamada, K., Kato, Y. & Teii, K., 2011, Silicon Carbide and Related Materials 2010. Monakhov, E. V., Hornos, T. & Svensson, B. G. (eds.). Trans Tech Publications Ltd, p. 524-527 4 p. (Materials Science Forum; vol. 679-680).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Fabrication of n-type β-FeSi₂/p-type Si heterojunctions by pulsed laser deposition and their application to NIR photodiodes

  Li, C., Yokoyama, W., Izumi, S., Nathaporn, P. & Yoshitake, T., 2010, TENCON 2010 - 2010 IEEE Region 10 Conference. p. 2225-2227 3 p. 5686670. (IEEE Region 10 Annual International Conference, Proceedings/TENCON).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of open-top microchannel plate using deep x-ray exposure mask made with SOI substrate

  Fujimura, T., Ikeda, A., Etoh, S., Hattori, R., Kuroki, Y. & Chang, S. S., Jan 1 2002, 2002 International Microprocesses and Nanotechnology Conference, MNC 2002. Institute of Electrical and Electronics Engineers Inc., p. 178-179 2 p. 1178602. (2002 International Microprocesses and Nanotechnology Conference, MNC 2002).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of optical gap selective amorphous carbon photocatalyst for hydrogen production under irradiation with visible light

  Okafuji, K., Kobayashi, R., Ohtomo, S., Naragino, H. & Honda, K., 2016, Photocatalysts, Photoelectrochemical Cells, and Solar Fuels 7. Wu, N., Chu, D., Kulesza, P. J., Nam, K. T., Park, H., Subramanian, V. R., Wang, H., Lee, J-J., Soriaga, M. P., Batina, N., Tatsuma, T., Ohtani, B. & Kudo, A. (eds.). 50 ed. Electrochemical Society Inc., p. 57-74 18 p. (ECS Transactions; vol. 75, no. 50).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of optical gas sensors using porphyrin-based nano-assembled thin films: A Comparison with bulk materials

  Korposh, S. O., Takahara, N., Lee, S. W. & Kunitake, T., 2007, 2007 7th IEEE International Conference on Nanotechnology - IEEE-NANO 2007, Proceedings. p. 1037-1040 4 p. 4601360. (2007 7th IEEE International Conference on Nanotechnology - IEEE-NANO 2007, Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Fabrication of PDMS scaffold with controlled configurations

  Masuda, T., Anada, T., Takahashi, I., Arai, F., Fukuda, T. & Suzuki, O., 2007, 2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS. p. 362-367 6 p. 4420881. (2007 International Symposium on Micro-NanoMechatronics and Human Science, MHS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of planar-type ferromagnet/nonmagnet/ferromagnet structures by using multi-angle deposition

  Kimura, T., Itagaki, Y., Wakaya, F. & Gamo, K., Jan 1 2001, 2001 International Microprocesses and Nanotechnology Conference, MNC 2001. Institute of Electrical and Electronics Engineers Inc., p. 172-173 2 p. 984145. (2001 International Microprocesses and Nanotechnology Conference, MNC 2001).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of PMMA micropillars by reactive ion etching towards separation of white and red blood cells

  Ito, S., Yasui, T., Okamoto, Y., Kaji, N., Tokeshi, M. & Baba, Y., 2012, Proceedings of the 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012. Chemical and Biological Microsystems Society, p. 1234-1236 3 p. (Proceedings of the 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Fabrication of polymer based on self-organization and its application

  Tanaka, M., 2005, 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan. 1 ed. Vol. 54. p. 61-63 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of probe tips for nanoscale 3D metrology

  Uchiyama, K., Murakami, H., Katsuki, A., Sajima, T., Yamamoto, T., Nagata, R. & Fujiyoshi, K., 2016, Proceedings - 32nd ASPE Annual Meeting. American Society for Precision Engineering, ASPE, p. 305-310 6 p. (Proceedings - 32nd ASPE Annual Meeting).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of self-organized porous films -Tissue engineering scaffolds and biomedical devices

  Tanaka, M., Takebayashi, M., Sato, K. & Shimomura, M., Dec 1 2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of single crystal silicon field emitter array on glass substrate

  Higa, K. & Asano, T., 2001, 2001 International Microprocesses and Nanotechnology Conference, MNC 2001. Institute of Electrical and Electronics Engineers Inc., p. 260-261 2 p. 984188. (2001 International Microprocesses and Nanotechnology Conference, MNC 2001).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Fabrication of SmBa_0.5Sr_0.5Co₂O_5+δ cathode material and its application for Sr- and Mg-doped LaGaO₃ electrolyte-supported solid oxide fuel cell

  Lin, T. N., Lee, R. Y., Kuo, J. Y., Ishihara, T. & Hosoi, K., Jan 1 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Singhal, S. C. & Eguchi, K. (eds.). 1 ed. Electrochemical Society Inc., p. 895-901 7 p. (ECS Transactions; vol. 68, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of spherical carbonate apatite using calcium sulfate as a precursor by W/O emulsion method

  Nomura, S., Tsuru, K., Matsuya, S., Takahashi, I. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 78-81 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of submicron-sized spherical particles using laser-induced agglomeration and fusion of nanoparticles

  Tsuji, T., Yahata, T., Yasutomo, M., Tsuji, M., Igawa, K., Ishikawa, Y. & Koshizaki, N., 2013, 2013 Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2013. 6600107. (Pacific Rim Conference on Lasers and Electro-Optics, CLEO - Technical Digest).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of taste sensor chip and portable taste sensor system

  Etoh, S., Iwakura, M., Nakashi, K., Hattor, R., Hayashi, K. & Toko, K., 2006, Proceedings of 2006 International Conference on Microtechnologies in Medicine and Biology. p. 180-183 4 p. 4281340

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Fabrication of taste sensor for education

  Wu, X., Tahara, Y., Toko, K. & Kuriyaki, H., Mar 13 2017, 11th Asian Conference on Chemical Sensors, ACCS 2015. Zaaba, S. K., Shakaff, A. Y. M., Kamarudin, K., Ramli, N. A. H., Zakaria, S. M. M. S., Ahmad, M. N. & Zakaria, A. (eds.). American Institute of Physics Inc., 020064. (AIP Conference Proceedings; vol. 1808).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of the electro-optic polymer modulator for O-band intra-datacenter communications

  Bannaron, A., Sato, H. & Yokoyama, S., 2021, 2021 IEEE CPMT Symposium Japan, ICSJ 2021. Institute of Electrical and Electronics Engineers Inc., p. 192-195 4 p. (2021 IEEE CPMT Symposium Japan, ICSJ 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Fabrication of UV-LED using ZnO nanowires directly grown on p-GaN film by NAPLD

  Tetsuyama, N., Ishida, Y., Higashihata, M., Nakamura, D. & Okada, T., Oct 18 2013, 2013 Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2013. 6600380. (Pacific Rim Conference on Lasers and Electro-Optics, CLEO - Technical Digest).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of VGA size near-infrared image sensor using room-temperature flip-chip bonding technology

  Shuto, T., Iwanabe, K., Ogura, M., Nishida, K. & Asano, T., Jan 30 2014, Proceedings of the 16th Electronics Packaging Technology Conference, EPTC 2014. Institute of Electrical and Electronics Engineers Inc., p. 536-539 4 p. 7028408. (Proceedings of the 16th Electronics Packaging Technology Conference, EPTC 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Fabrication of ZnO crystals by UV-laser annealing on ZnO nanoparticles prepared by laser ablation method

  Shimogaki, T., Kawahara, H., Higashihata, M., Ikenoue, H., Nakamura, D., Nakata, Y. & Okada, T., 2015, Oxide-Based Materials and Devices VI. Teherani, F. H., Look, D. C. & Rogers, D. J. (eds.). SPIE, 93640C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9364).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Fabrication of βTCP foam using αTCP foam as a precursor by heat treatment

  Nikaido, T., Tsuru, K., Kawachi, G., Munar, M., Matsuya, S., Nakamura, S. & Ishikawa, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 15-18 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Fabrication of βtcp with fully-interconnected porous structure

  Nikaido, T., Tsuru, K., Daitou, F., Munar, M., Matsuya, S., Nakamura, S. & Ishikawa, K., Jan 1 2012, Bioceramics 23. p. 135-138 4 p. (Key Engineering Materials; vol. 493-494).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Face completion with pyramid semantic attention and latent codes

  Cao, S. & Sakurai, K., Nov 2020, Proceedings - 2020 8th International Symposium on Computing and Networking, CANDAR 2020. Institute of Electrical and Electronics Engineers Inc., p. 1-8 8 p. 09394355. (Proceedings - 2020 8th International Symposium on Computing and Networking, CANDAR 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Face Detection from Artless Backgrounds

  Ono, N., NAITO, T. & Takiyama, R., Jul 1999, Proceedings of 1999 International Technical Conference on Circuits/Systems, Computers and Communications. Vol. 2. p. 939-942 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Face recognition across illumination

  Aly, S., Sagheer, A., Tsuruta, N. & Taniguchi, R-I., Dec 1 2007, Proceedings of the 12th International Symposium on Artificial Life and Robotics, AROB 12th'07. p. 802-805 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Face recognition under varying illumination using Mahalanobis self-organizing map

  Aly, S., Tsuruta, N. & Taniguchi, R-I., Dec 1 2008, Proceedings of the 13th International Symposium on Artificial Life and Robotics, AROB 13th'08. p. 207-210 4 p. (Proceedings of the 13th International Symposium on Artificial Life and Robotics, AROB 13th'08).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution