Find Research outputs

Search results

• Conference contribution

  Evaluating the impact of solar radiation on outdoor thermal comfort by the development and validation of a simple urban climatic model

  Zhu, Y., Liu, J., Yao, Y., Ma, Z., Hagishima, A. & Tanimoto, J., Dec 1 2006, Proceedings of the ASME International Solar Energy Conference - Solar Engineering 2006. (International Solar Energy Conference; vol. 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Evaluating the impact of solar radiation on outdoor thermal comfort by the development and validation of a simple Urban climatic model

  Zhu, Y., Liu, J., Yao, Y., Ma, Z., Hagishima, A. & Tanimoto, J., Nov 19 2007, Proceedings of the ASME International Solar Energy Conference, ISEC2006. p. 515-521 7 p. (International Solar Energy Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Evaluating the impacts of code-level performance tunings on power efficiency

  Imamura, S., Oka, K., Yasui, Y., Inadomi, Y., Fujisawa, K., Endo, T., Ueno, K., Fukazawa, K., Hata, N., Kakibuka, Y., Inoue, K. & Ono, T., Jan 1 2016, Proceedings - 2016 IEEE International Conference on Big Data, Big Data 2016. Ak, R., Karypis, G., Xia, Y., Hu, X. T., Yu, P. S., Joshi, J., Ungar, L., Liu, L., Sato, A-H., Suzumura, T., Rachuri, S., Govindaraju, R. & Xu, W. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 362-369 8 p. 7840624. (Proceedings - 2016 IEEE International Conference on Big Data, Big Data 2016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Evaluation and analysis of distortion of complex shaped Ti-6Al-4V compacts by metal injection molding process

  Virdhian, S., Osada, T., Kang, H. G., Tsumori, F. & Miura, H., Nov 1 2012, Powder Metallurgy of Titanium: Powder Processing, Consolidation and Metallurgy of Titanium. p. 187-194 8 p. (Key Engineering Materials; vol. 520).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)

• Evaluation and optimization of the granulated blast furnace slag-natural sand mixture hardening properties

  Sakata, T., Yasufuku, N. & Ishikura, R., Jan 1 2019, Proceedings of the 8th International Congress on Environmental Geotechnics Volume 1 - Towards a Sustainable Geoenvironment. Bouazza, A., Zhan, L. & Chen, Y. (eds.). Springer Berlin Heidelberg, p. 311-319 9 p. (Environmental Science and Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation and simulation of a waste heat driven pressurized solid-Sorption chiller

  Loh, W. S., Rahman, K. A., Chakraborty, A., Saha, B. B., Ng, K. C. & Chun, W. G., Jan 1 2010, 5th Asian Conference on Refrigeration and Air Conditioning, ACRA 2010 - Green Breeze from Asia: Frontiers of Refrigerants, Heat Transfer and System. Japan Society of Refrigeration and Air Conditioning Engineering (JSRAE), (5th Asian Conference on Refrigeration and Air Conditioning, ACRA 2010 - Green Breeze from Asia: Frontiers of Refrigerants, Heat Transfer and System).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation for cellular specificity of comb-type copolymer having hyaluronic acid side chains

  Fujii, N., Choi, S. W., Kano, A., Akaike, T. & Maruyama, A., 2005, 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan. 1 ed. Vol. 54. p. 2147 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation Index to Find Relevant Papers: Improvement of Focused Citation Count

  Nakatoh, T. & Hirokawa, S., 2019, Human Interface and the Management of Information. Visual Information and Knowledge Management - Thematic Area, HIMI 2019, Held as Part of the 21st HCI International Conference, HCII 2019, Proceedings. Yamamoto, S. & Mori, H. (eds.). Springer Verlag, p. 555-566 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11569 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation method for earthquake resistance capacity of small-scale buildings using microtremors

  Tsuji, T., Maiguma, T. & Yamada, M., Nov 21 2013, Proceedings of the 11th SEGJ International Symposium. p. 290-293

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of active magnetic regenerator with Mn-based compound as magnetic refrigerant

  Kawanami, T., Komiya, T., Wada, H., Yamashita, K., Onishi, T. & Soejima, K., 2011, 6th IIR/IIF International Conference on Magnetic Refrigeration at Room Temperature, THERMAG 2014. Rowe, A. (ed.). International Institute of Refrigeration, p. 65-66 2 p. (Refrigeration Science and Technology; vol. 2011-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Evaluation of aggregation structures at poly(4-trimethylsilylstyrene)/ polyisoprene blend thin film surfaces

  Ohya, M., Kawaguchi, D., Takano, A., Matsushita, Y. & Torikai, N., 2005, 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan. 1 ed. Vol. 54. p. 982 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of a head movement artifact removal method for EEG considering real-time prosessing

  Onikura, K. & Iramina, K., Feb 4 2016, BMEiCON 2015 - 8th Biomedical Engineering International Conference. Institute of Electrical and Electronics Engineers Inc., 7399577

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Evaluation of a high-speed air turbine microspindle for monitoring machining processes using audible sound and pressure measurements

  Guangyu, Z., Murakami, H., Katsuki, A., Sajima, T. & Uchiyama, K., Jan 1 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. Leach, R. (ed.). euspen, p. 151-152 2 p. (Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of a location management system for wireless communicating mobile computers

  Shimada, H., Tagashira, S., Nakanishi, T. & Fukuda, A., 2002, Information Networking: Wireless Communications Technologies and Network Applications - International Conference, ICOIN 2002, Revised Papers. Chong, I. (ed.). Springer Verlag, p. 154-164 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 2344).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of Anisakis simplex larvae's penetrability using agar method

  Kojima, F. & Fujimoto, S., 2013, INTERNATIONAL JOURNAL OF ANTIMICROBIAL AGENTS. Vol. 42. p. S115-S116

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of anti-spam method combining Bayesian filtering and strong challenge and response

  Iwanaga, M., Tabata, T. & Sakurai, K., Dec 1 2003, Proceedings of the IASTED International Conference on Communication, Network, and Information Security. Hamza, M. H. (ed.). p. 214-219 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Evaluation of a relationship between aerosols and surface downward shortwave flux through an integrative analysis of a global aerosol-transport model and in-situ measurements

  Goto, D., Kanazawa, S., Nakajima, T. & Takemura, T., 2013, Radiation Processes in the Atmosphere and Ocean, IRS 2012 - Proceedings of the International Radiation Symposium (IRC/IAMAS). p. 680-683 4 p. (AIP Conference Proceedings; vol. 1531).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of a tactile device for augmentation of audiovisual experiences with a pseudo heartbeat

  Nishimura, N., Hachisu, T., Sato, M., Fukushima, S. & Kajimoto, H., 2013, 4th Augmented Human International Conference, AH 2013. p. 242 1 p. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of atmospheric environment and time-dependent corrosion depth for unpainted carbon steel using Zn/Ag ACM corrosion sensor

  Ito, Y. & Kainuma, S., Dec 1 2011, 18th International Corrosion Congress 2011. p. 659-664 6 p. (18th International Corrosion Congress 2011; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of a wake-up wireless module with Bloom-filter-based ID matching

  Ishida, S., Takiguchi, T., Saruwatari, S., Minami, M. & Morikawa, H., Sep 16 2010, 8th Asia-Pacific Symposium on Information and Telecommunication Technologies, APSITT 2010. 5532297. (8th Asia-Pacific Symposium on Information and Telecommunication Technologies, APSITT 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• Evaluation of bearing capacity on floating type improved ground

  Ishikura, R., Matsuda, H. & Matsui, H., 2011, 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of BLE Separate Channel Fingerprinting in Practical Environment

  Ishida, S., Takaki, S., Yamamoto, T., Tagashira, S. & Fukuda, A., Jul 2 2018, Proceedings - 2018 7th International Congress on Advanced Applied Informatics, IIAI-AAI 2018. Institute of Electrical and Electronics Engineers Inc., p. 121-124 4 p. 8693464. (Proceedings - 2018 7th International Congress on Advanced Applied Informatics, IIAI-AAI 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Evaluation of cardiac oxygen consumption under hypoxia with tissue model integrating microcirculation model and cell model

  Amano, A., Kubota, Y., Shimayoshi, T. & Matsuda, T., 2009, Proceedings of the 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society: Engineering the Future of Biomedicine, EMBC 2009. IEEE Computer Society, p. 3885-3888 4 p. 5332645. (Proceedings of the 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society: Engineering the Future of Biomedicine, EMBC 2009).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Evaluation of cell viability of porous scaffold fabricated via freeze-drying technique for vascular tissue engineering

  Tam, T. T., Todo, M., Cheong, K. Y. & Hamid, Z. A. A., Sep 21 2020, 3rd International Postgraduate Conference on Materials, Minerals and Polymer, MAMIP 2019. Jaafar, M. & Sharif, N. M. (eds.). American Institute of Physics Inc., 020007-1. (AIP Conference Proceedings; vol. 2267).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access
  1 Citation (Scopus)

• Evaluation of column performance of microfabricated 3D structures for LC separations

  Nakamura, M., Naito, T., Kubo, T. & Otsuka, K., 2015, MicroTAS 2015 - 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Chemical and Biological Microsystems Society, p. 1942-1944 3 p. (MicroTAS 2015 - 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of complex harmonic signals from magnetic nanoparticles for magnetic particle imaging

  Yoshida, T., Tsujimura, N., Tanabe, K., Sasayama, T. & Enpuku, K., Jul 14 2015, 2015 IEEE International Magnetics Conference, INTERMAG 2015. Institute of Electrical and Electronics Engineers Inc., 7157571. (2015 IEEE International Magnetics Conference, INTERMAG 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Evaluation of conducted noise of resonant switched capacitor converter

  Shoyama, M., Deriha, F. & Ninomiya, T., Dec 1 2006, INTELEC 2006: 28th Annual International Telecommunications Energy Conference. 4018117. (INTELEC, International Telecommunications Energy Conference (Proceedings)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Evaluation of creep deformation mechanism of heat resistant steel by stress change test

  Hayakawa, H., Nakashima, S., Kusumoto, J., Terada, D., Yoshida, F. & Nakashima, H., 2008, 2007 Proceedings of the ASME Pressure Vessels and Piping Conference - 8th International Conference on Creep and Fatigue at Elevated Temperatures - CREEP8. p. 533-542 10 p. (2007 Proceedings of the ASME Pressure Vessels and Piping Conference - 8th International Conference on Creep and Fatigue at Elevated Temperatures - CREEP8).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of cross sections for neutrons and protons up to 3 GeV on ^12,13C

  Watanabe, Y., Kosako, K., Sukhovitskiĩ, E. S., Iwamoto, O., Chiba, S. & Fukahori, T., May 24 2005, International Conference on Nuclear Data for Science and Technology. p. 346-349 4 p. (AIP Conference Proceedings; vol. 769).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Evaluation of crushed Granulated Blast Furnace Slag ? sand mixtures liquefaction characteristics under unified compaction energy

  Nagata, S., Ishikura, R., Yasufuku, N. & Alowaisy, A., Nov 2019, Technical Forum on Mitigation of Geo-disasters in Asia. p. 80-83 4 p. P019

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of drag coefficient variation in transit mode on leg & spud can of DP Jackups vessel

  Thulkar, N. D. & Yamaguchi, S., Jan 1 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 1314-1321 8 p. (Proceedings of the International Offshore and Polar Engineering Conference; vol. 2018-June).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of durability of thermoelectric properties for Zn ₄Sb₃ compounds

  Souma, T. & Ohtaki, M., 2005, Proceedings - ICT'05: 24th International Conference on Thermoelectrics. Institute of Electrical and Electronics Engineers Inc., p. 411-414 4 p. 1519974. (International Conference on Thermoelectrics, ICT, Proceedings; vol. 2005).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Evaluation of effect of operating and shape condition by simplified two-dimensional PEFC analysis model

  Inoue, G., Matsukuma, Y. & Minemoto, M., Dec 1 2004, Proton Conducting Membrane Fuel Cells IV - Proceedings of the International Symposium. p. 93-105 13 p. (Proceedings - Electrochemical Society; vol. PV 2004-21).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of efficient attitude of a multi-legged planetary exploration rover with isotropic leg arrangement

  Nishikori, S. & Hokamoto, S., Dec 1 2010, Applications of Space Technology for Humanity - Advances in the Astronautical Sciences: Proceedings of the 12th International Conference of Pacific-Basin Societies, ISCOPS. p. 667-679 13 p. (Advances in the Astronautical Sciences; vol. 138).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Evaluation of environmental barrier coatings for SiC/SiC composites

  Nakayama, H., Morishita, K., Ochiai, S., Sekigawa, T., Aoyama, K. & Ikawa, A., Dec 1 2006, Advanced Ceramic Coatings and Interfaces - A Collection of Papers Presented at the 30th International Conference on Advanced Ceramics and Composites. 3 ed. p. 161-170 10 p. (Ceramic Engineering and Science Proceedings; vol. 27, no. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Evaluation of expected performance of Shintake beam size monitor for ATF2

  Yamaguchi, Y., Komamiya, S., Orouku, M., Suehara, T., Yamanaka, T., Kamiya, Y., Araki, S., Okugi, T., Tauchi, T., Terunuma, N. & Urakawa, J., Dec 1 2010, IPAC 2010 - 1st International Particle Accelerator Conference. p. 1014-1016 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of fatigue strength of plain and notched specimens of short carbon-fiber reinforced polyetheretherketone in comparison with polyetheretherketone

  Nisitani, H., Kim, Y. H. & Noguchi, H., Jan 1 1992, Proc Second Int Offshore Polar Eng Conf. Publ by Int Soc of Offshore and Polar Engineerns (ISOPE), p. 55-62 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of Feel of Fishing Reel by Elucidating the Relationship Between Tactile Sensation and Gear Vibration

  Inoue, T. & Kurokawa, S., Jan 1 2020, Advances in Affective and Pleasurable Design - Proceedings of the AHFE 2019 International Conference on Affective and Pleasurable Design. Fukuda, S. (ed.). Springer Verlag, p. 154-164 11 p. (Advances in Intelligent Systems and Computing; vol. 952).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of foreground detection methodology for a moving camera

  Minematsu, T., Uchiyama, H., Shimada, A., Nagahara, H. & Taniguchi, R. I., May 7 2015, 2015 Frontiers of Computer Vision, FCV 2015. Institute of Electrical and Electronics Engineers Inc., 7103752. (2015 Frontiers of Computer Vision, FCV 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Evaluation of gamma ray durability of RF tag and application to the radiation environment

  Teraura, N., Ito, K., Kobayashi, D. & Sakurai, K., Jan 12 2016, 2015 IEEE International Conference on RFID Technology and Applications, RFID-TA 2015. Institute of Electrical and Electronics Engineers Inc., p. 147-152 6 p. 7379809. (2015 IEEE International Conference on RFID Technology and Applications, RFID-TA 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Evaluation of gas diffusion performance in wet GDL with 3D pore network model

  Inoue, G., Matsukuma, Y. & Minemoto, M., 2009, ECS Transactions -Proton Exchange Membrane Fuel Cells 9. 1 PART 2 ed. p. 1519-1527 9 p. (ECS Transactions; vol. 25, no. 1 PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  25 Citations (Scopus)

• Evaluation of gas production rate from methane hydrate layers by a system with multiple dual horizontal wells

  Sasaki, K., Ono, S., Sugai, Y., Ebinuma, T., Yamaguchi, T. & Narita, H., 2018, Canadian International Petroleum Conference 2008. Petroleum Society of Canada (PETSOC), (Canadian International Petroleum Conference 2008).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of gravity dependence of lunar surface bearing capacity

  Kobayashi, T., Omine, K., Suyama, Y. & Ishikura, R., 2009, Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering: The Academia and Practice of Geotechnical Engineering. p. 656-659 4 p. (Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering: The Academia and Practice of Geotechnical Engineering; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of hybrid optimization with EMO and IEC for architectural floor planning

  Inoue, M., Unehara, M., Yamada, K., Hiramoto, M. & Takagi, H., Feb 18 2014, 2014 Joint 7th International Conference on Soft Computing and Intelligent Systems, SCIS 2014 and 15th International Symposium on Advanced Intelligent Systems, ISIS 2014. Institute of Electrical and Electronics Engineers Inc., p. 54-61 8 p. 7044784. (2014 Joint 7th International Conference on Soft Computing and Intelligent Systems, SCIS 2014 and 15th International Symposium on Advanced Intelligent Systems, ISIS 2014).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Evaluation of Hybrid Pile Supported System for Protecting Road Embankment Under Seismic Loading

  Qin, C., Hazarika, H., Pasha, S. M. K., Furuichi, H., Kochi, Y., Matsumoto, D., Fujishiro, T., Ishibashi, S., Watanabe, N. & Yamamoto, S., 2021, Advances in Sustainable Construction and Resource Management. Hazarika, H., Madabhushi, G. S., Yasuhara, K. & Bergado, D. T. (eds.). Springer Science and Business Media Deutschland GmbH, p. 733-744 12 p. (Lecture Notes in Civil Engineering; vol. 144 LNCE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Evaluation of hydroxyapatite film by powder jet deposition after artificial aging

  Akatsuka, R., Matsumura, K., Noji, M., Nishikawa, C., Sato, K., Hagiwara, T., Anada, T., Suzuki, O., Kuriyagawa, T. & Sasaki, K., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 229-232 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of hysteresis of soil water retention curve by a semi-physical model

  Qiang, L., Yasufuku, N. & Taizou, K., 2011, 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of impressions of the impulsiveness of noise emitted by office equipment

  Takada, M., Sakemi, K., Kim, K. H., Iwamiya, S. I., Ito, T., Watanabe, T. & Yoshikawa, S., 2011, 40th International Congress and Exposition on Noise Control Engineering 2011, INTER-NOISE 2011. Vol. 4. p. 3071-3076 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Evaluation of joint defects on FSW of mg alloy using statistical method

  Kinoshita, T., Hayashi, K., Hamada, S., Shigematsu, I. & Noguchi, H., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. European Conference on Fracture, ECF, (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Evaluation of laser trapping probe properties for coordinate measurement

  Michihata, M., Takaya, Y., Miyoshi, T. & Hayashi, T., Dec 1 2006, Optomechatronic Sensors, Instrumentation, and Computer-Vision Systems. 637509. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6375).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)