Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2018
  • 2017
  • 2016
  • 2014
  • 2013
  • 2012
  • 2010

Author

  • Masato Furukawa
2018

Flow structure and unsteady behavior of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Yamada, K., Furukawa, M., Watanabe, K., Matsuoka, A. & Niwa, N., Jan 1 2018, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2A-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
4 Citations (Scopus)

The role of meridional geometry in aerodynamic design of centrifugal compressor

Ito, S., Furukawa, M., Yamada, K., Manabe, K., Oka, N., Tomita, I. & Hayashi, Y., Jan 1 2018, Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2017

A study on unsteady flow phenomena at near-stall in a multi-stage axial flow compressor by large-scale DES with K computer

Yamada, K., Furukawa, M., Nakakido, S., Tamura, Y., Matsuoka, A. & Nakayama, K., Feb 1 2017, In : International Journal of Gas Turbine, Propulsion and Power Systems. 9, 1, p. 18-26 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Evolution of reverse flow in a transonic centrifugal compressor at near-surge

Yamada, K., Furukawa, M., Arai, H. & Kanzaki, D., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Large-scale detached-eddy simulation analysis of stall inception process in a multistage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., Jul 1 2017, In : Journal of Turbomachinery. 139, 7, 071002.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Optimum aerodynamic design of centrifugal compressor impeller using an inverse method based on meridional viscous flow analysis

Oka, N., Furukawa, M., Yamada, K., Itou, S., Ibaraki, S., Iwakiri, K. & Hayashi, Y., Jan 1 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Optimum aerodynamic design of centrifugal comPressor using a genetic algorithm and an inverse method based on meridional viscous flow analysis

Itou, S., Oka, N., Furukawa, M., Yamada, K., Ibaraki, S., Iwakiri, K. & Hayashi, Y., Jan 1 2017.

Research output: Contribution to conferencePaper

Optimum aerodynamic design of centrifugal comPressor using a genetic algorithm and an inverse method based on meridional viscous flow analysis

Itou, S., Oka, N., Furukawa, M., Yamada, K., Ibaraki, S., Iwakiri, K. & Hayashi, Y., Jan 1 2017.

Research output: Contribution to conferencePaper

Study on influence of blade number on aerodynamic noise of half-ducted propeller fans for packaged air-conditioners

Iwase, T., Kishitani, T. & Furukawa, M., Oct 1 2017, In : International Journal of Fluid Machinery and Systems. 10, 4, p. 318-327 10 p., O16044C.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Vortical flow structure of hub-corner separation in a stator cascade of a multi-stage transonic axial compressor

Saito, S., Furukawa, M., Yamada, K., Tamura, Y., Matsuoka, A. & Niwa, N., Jan 1 2017, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2016

Direct numerical simulation of turbulent flow and aeroacoustic fields around an airfoil using lattice boltzmann method

Kusano, K., Yamada, K., Furukawa, M. & Moon, K. J., Jan 1 2016, Symposia: Turbomachinery Flow Simulation and Optimization; Applications in CFD; Bio-Inspired and Bio-Medical Fluid Mechanics; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES and Hybrid RANS/LES Methods; Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Active Fluid Dynamics and Flow Control - Theory, Experiments and Implementation. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Large-scale des analysis of stall inception process in a multi-stage axial flow compressor

Yamada, K., Furukawa, M., Tamura, Y., Saito, S., Matsuoka, A. & Nakayama, K., Jan 1 2016, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2D-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2014

Simultaneous optimization of rotor blade and wind-lens for aerodynamic design of wind-lens turbine

Oka, N., Furukawa, M., Yamada, K., Kawamitsu, K., Kido, K. & Oka, A., Jan 1 2014, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, GT 2014. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 3B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Suppression of secondary flows in an axial flow turbine rotor with a novel blade design concept

Yamada, K., Furukawa, M., Shibata, T., Nakakido, S. & Oka, N., Jan 1 2014, Turbomachinery. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 2C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2013

Aerodynamic design for wind-lens turbine using optimization technique

Oka, N., Furukawa, M., Yamada, K. & Kido, K., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT02A009. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Effects of tip clearance flow on rotating stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Jul 15 2013, In : Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 79, 801, p. 900-916 17 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Effects of tip clearance on the stall inception process in an axial compressor rotor

Yamada, K., Kikuta, H., Furukawa, M., Gunjishima, S. & Hara, Y., Dec 17 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. GT2013-95479. (Proceedings of the ASME Turbo Expo; vol. 6 C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

27 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Jun 28 2013, In : Journal of Turbomachinery. 135, 3, 051020.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Toward direct numerical simulation of aeroacoustic field around airfoil using multi-scale lattice boltzmann method

Kusano, K., Yamada, K. & Furukawa, M., Dec 1 2013, ASME 2013 Fluids Engineering Division Summer Meeting, FEDSM 2013. V01AT09A005. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1 A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2012

An explanation for flow features of spike-type stall inception in an axial compressor rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 2663-2675 13 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

An Explanation for Flow Features of Spike-Type Stall Inception in an Axial Compressor Rotor

Yamada, K., Kikuta, H., Iwakiri, K. I., Furukawa, M. & Gunjishima, S., Nov 5 2012, In : Journal of Turbomachinery. 135, 2, 021023.

Research output: Contribution to journalArticle

70 Citations (Scopus)

Development of advanced centrifugal compressor for turbocharger, applying control of internal unsteady flow structure

Ebisu, M., Shiraishi, T., Tomita, I. & Furukawa, M., Jan 1 2012, Institution of Mechanical Engineers - 10th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Limited, p. 135-144 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

The effect of tip leakage vortex for operating range enhancement of centrifugal compressor

Tomita, I., Ibaraki, S., Furukawa, M. & Yamada, K., Dec 1 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A, B, AND C ed. p. 735-743 9 p. (Proceedings of the ASME Turbo Expo; vol. 8, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2010

Comparative study on tip clearance flow fields in two types of transonic centrifugal compressor impeller with splitter blades

Yamada, K., Tamagawa, Y., Fukushima, H., Furukawa, M., Ibaraki, S. & Iwakiri, K. I., Dec 1 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. p. 2053-2063 11 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PARTS A, B, AND C).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)