A 0.18 μm CMOS current reuse ultra-wideband low noise amplifier (UWB-LNA) with minimized group delay variations

K. Yousef, H. Jia, R. Pokharel, A. Allam, M. Ragab, H. Kanaya

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

This paper presents the design of a CMOS low noise amplifier (LNA) with minimized group delay variations and optimized noise performance for ultra-wideband (UWB) applications. The proposed LNA employs a common source based current reuse topology. Through this configuration gain flatness of 12.25± 0.25 with noise figure (NF) less than 3.8 dB are achieved. This LNA achieves group delay variation of ±25 ps using the standard 0.18 μm CMOS technology. Weak Capacitive-Resistive shunt feedback technique is implemented across the input stage for wideband input matching. Series peaking with output resistive termination are adopted for group delay variations optimization. This UWB LNA has a measured 1dB compression point (P1dB) and an input third-order inter-modulation point (IIP3) of-7.0 dBm and 2.5 dBm respectively at 5.5 GHz. The implemented UWB LNA chip area is only 560 μm × 590 μm.

Original languageEnglish
Title of host publicationEuropean Microwave Week 2014
Subtitle of host publicationConnecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1392-1395
Number of pages4
ISBN (Electronic)9782874870354
DOIs
Publication statusPublished - Dec 15 2014
Event2014 44th European Microwave Conference, EuMC 2014 - Held as Part of the 17th European Microwave Week, EuMW 2014 - Rome, Italy
Duration: Oct 6 2014Oct 9 2014

Publication series

NameEuropean Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference

Other

Other2014 44th European Microwave Conference, EuMC 2014 - Held as Part of the 17th European Microwave Week, EuMW 2014
CountryItaly
CityRome
Period10/6/1410/9/14

Fingerprint

Broadband amplifiers
Group delay
Low noise amplifiers
Ultra-wideband (UWB)
Noise figure
Topology
Modulation
Feedback

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

Cite this

Yousef, K., Jia, H., Pokharel, R., Allam, A., Ragab, M., & Kanaya, H. (2014). A 0.18 μm CMOS current reuse ultra-wideband low noise amplifier (UWB-LNA) with minimized group delay variations. In European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference (pp. 1392-1395). [6986705] (European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EuMC.2014.6986705

A 0.18 μm CMOS current reuse ultra-wideband low noise amplifier (UWB-LNA) with minimized group delay variations. / Yousef, K.; Jia, H.; Pokharel, R.; Allam, A.; Ragab, M.; Kanaya, H.

European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference. Institute of Electrical and Electronics Engineers Inc., 2014. p. 1392-1395 6986705 (European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yousef, K, Jia, H, Pokharel, R, Allam, A, Ragab, M & Kanaya, H 2014, A 0.18 μm CMOS current reuse ultra-wideband low noise amplifier (UWB-LNA) with minimized group delay variations. in European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference., 6986705, European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference, Institute of Electrical and Electronics Engineers Inc., pp. 1392-1395, 2014 44th European Microwave Conference, EuMC 2014 - Held as Part of the 17th European Microwave Week, EuMW 2014, Rome, Italy, 10/6/14. https://doi.org/10.1109/EuMC.2014.6986705
Yousef K, Jia H, Pokharel R, Allam A, Ragab M, Kanaya H. A 0.18 μm CMOS current reuse ultra-wideband low noise amplifier (UWB-LNA) with minimized group delay variations. In European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference. Institute of Electrical and Electronics Engineers Inc. 2014. p. 1392-1395. 6986705. (European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference). https://doi.org/10.1109/EuMC.2014.6986705
Yousef, K. ; Jia, H. ; Pokharel, R. ; Allam, A. ; Ragab, M. ; Kanaya, H. / A 0.18 μm CMOS current reuse ultra-wideband low noise amplifier (UWB-LNA) with minimized group delay variations. European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference. Institute of Electrical and Electronics Engineers Inc., 2014. pp. 1392-1395 (European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference).
@inproceedings{2ffe8a368c3d4879b7805d91c89ec4a9,
title = "A 0.18 μm CMOS current reuse ultra-wideband low noise amplifier (UWB-LNA) with minimized group delay variations",
abstract = "This paper presents the design of a CMOS low noise amplifier (LNA) with minimized group delay variations and optimized noise performance for ultra-wideband (UWB) applications. The proposed LNA employs a common source based current reuse topology. Through this configuration gain flatness of 12.25± 0.25 with noise figure (NF) less than 3.8 dB are achieved. This LNA achieves group delay variation of ±25 ps using the standard 0.18 μm CMOS technology. Weak Capacitive-Resistive shunt feedback technique is implemented across the input stage for wideband input matching. Series peaking with output resistive termination are adopted for group delay variations optimization. This UWB LNA has a measured 1dB compression point (P1dB) and an input third-order inter-modulation point (IIP3) of-7.0 dBm and 2.5 dBm respectively at 5.5 GHz. The implemented UWB LNA chip area is only 560 μm × 590 μm.",
author = "K. Yousef and H. Jia and R. Pokharel and A. Allam and M. Ragab and H. Kanaya",
year = "2014",
month = "12",
day = "15",
doi = "10.1109/EuMC.2014.6986705",
language = "English",
series = "European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "1392--1395",
booktitle = "European Microwave Week 2014",
address = "United States",

}

TY - GEN

T1 - A 0.18 μm CMOS current reuse ultra-wideband low noise amplifier (UWB-LNA) with minimized group delay variations

AU - Yousef, K.

AU - Jia, H.

AU - Pokharel, R.

AU - Allam, A.

AU - Ragab, M.

AU - Kanaya, H.

PY - 2014/12/15

Y1 - 2014/12/15

N2 - This paper presents the design of a CMOS low noise amplifier (LNA) with minimized group delay variations and optimized noise performance for ultra-wideband (UWB) applications. The proposed LNA employs a common source based current reuse topology. Through this configuration gain flatness of 12.25± 0.25 with noise figure (NF) less than 3.8 dB are achieved. This LNA achieves group delay variation of ±25 ps using the standard 0.18 μm CMOS technology. Weak Capacitive-Resistive shunt feedback technique is implemented across the input stage for wideband input matching. Series peaking with output resistive termination are adopted for group delay variations optimization. This UWB LNA has a measured 1dB compression point (P1dB) and an input third-order inter-modulation point (IIP3) of-7.0 dBm and 2.5 dBm respectively at 5.5 GHz. The implemented UWB LNA chip area is only 560 μm × 590 μm.

AB - This paper presents the design of a CMOS low noise amplifier (LNA) with minimized group delay variations and optimized noise performance for ultra-wideband (UWB) applications. The proposed LNA employs a common source based current reuse topology. Through this configuration gain flatness of 12.25± 0.25 with noise figure (NF) less than 3.8 dB are achieved. This LNA achieves group delay variation of ±25 ps using the standard 0.18 μm CMOS technology. Weak Capacitive-Resistive shunt feedback technique is implemented across the input stage for wideband input matching. Series peaking with output resistive termination are adopted for group delay variations optimization. This UWB LNA has a measured 1dB compression point (P1dB) and an input third-order inter-modulation point (IIP3) of-7.0 dBm and 2.5 dBm respectively at 5.5 GHz. The implemented UWB LNA chip area is only 560 μm × 590 μm.

UR - http://www.scopus.com/inward/record.url?scp=84929230994&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84929230994&partnerID=8YFLogxK

U2 - 10.1109/EuMC.2014.6986705

DO - 10.1109/EuMC.2014.6986705

M3 - Conference contribution

AN - SCOPUS:84929230994

T3 - European Microwave Week 2014: Connecting the Future, EuMW 2014 - Conference Proceedings; EuMC 2014: 44th European Microwave Conference

SP - 1392

EP - 1395

BT - European Microwave Week 2014

PB - Institute of Electrical and Electronics Engineers Inc.

ER -