A comparative study of SPG membrane emulsification in the presence and absence of continuous-phase flow

Masato Kukizaki, Masahiro Goto

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

Membrane emulsification using Shirasu porous glass (SPG) membranes is a promising technique for preparing uniformly sized emulsion droplets and has potential applications in many fields. In this study, to gain further insight into droplet formation behavior from SPG membranes in the absence of continuous-phase flow, a comparative investigation of droplet formation behavior with and without water phase flow was carried out in an oil-in-water emulsion system consisting of soybean oil and 1 wt/v % polyoxyethylene(20)sorbitan monooleate (Tween 80) aqueous solution. In the absence of water phase flow, uniformly sized oil droplets with a mean diameter of 9.88 μm and a diameter distribution span of 0.62 were spontaneously formed from the pore openings of an SPG membrane with a mean pore diameter of 3.04 μm. Under these conditions, the various forces acting on a droplet formed at a pore opening were estimated from the dimensionless numbers (Bond, Capillary and Weber numbers). The estimation results indicated that oil-water interfacial tension is the dominating force for the spontaneous droplet detachment, due to the fact that the oil phase distorted by the tortuous pores is transformed into spherical droplets by the interfacial tension. In the presence of water phase flow, uniform oil droplets with a mean diameter of 8.63 μm and a diameter distribution span of 0.43 were detached from the same membrane by the shear force caused by the water phase flow before growing enough at the pore openings. The absence of water phase flow resulted in an increase in the proportion of active pores, compared to the presence of water phase flow. This is because, in the latter case, the oil droplets at the pore openings are deformed by the water phase flow, and thus the effect of steric hindrance between the neighboring droplets becomes greater.

Original languageEnglish
Pages (from-to)520-530
Number of pages11
JournalJOURNAL OF CHEMICAL ENGINEERING OF JAPAN
Volume42
Issue number7
DOIs
Publication statusPublished - Aug 13 2009

Fingerprint

Emulsification
Membranes
Glass
Water
Oils
Emulsions
Surface tension
Soybean oil
Soybean Oil
Polysorbates
Polyethylene glycols

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)

Cite this

A comparative study of SPG membrane emulsification in the presence and absence of continuous-phase flow. / Kukizaki, Masato; Goto, Masahiro.

In: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, Vol. 42, No. 7, 13.08.2009, p. 520-530.

Research output: Contribution to journalArticle

@article{16ed30fc5ab14958879d1a07cd22221f,
title = "A comparative study of SPG membrane emulsification in the presence and absence of continuous-phase flow",
abstract = "Membrane emulsification using Shirasu porous glass (SPG) membranes is a promising technique for preparing uniformly sized emulsion droplets and has potential applications in many fields. In this study, to gain further insight into droplet formation behavior from SPG membranes in the absence of continuous-phase flow, a comparative investigation of droplet formation behavior with and without water phase flow was carried out in an oil-in-water emulsion system consisting of soybean oil and 1 wt/v {\%} polyoxyethylene(20)sorbitan monooleate (Tween 80) aqueous solution. In the absence of water phase flow, uniformly sized oil droplets with a mean diameter of 9.88 μm and a diameter distribution span of 0.62 were spontaneously formed from the pore openings of an SPG membrane with a mean pore diameter of 3.04 μm. Under these conditions, the various forces acting on a droplet formed at a pore opening were estimated from the dimensionless numbers (Bond, Capillary and Weber numbers). The estimation results indicated that oil-water interfacial tension is the dominating force for the spontaneous droplet detachment, due to the fact that the oil phase distorted by the tortuous pores is transformed into spherical droplets by the interfacial tension. In the presence of water phase flow, uniform oil droplets with a mean diameter of 8.63 μm and a diameter distribution span of 0.43 were detached from the same membrane by the shear force caused by the water phase flow before growing enough at the pore openings. The absence of water phase flow resulted in an increase in the proportion of active pores, compared to the presence of water phase flow. This is because, in the latter case, the oil droplets at the pore openings are deformed by the water phase flow, and thus the effect of steric hindrance between the neighboring droplets becomes greater.",
author = "Masato Kukizaki and Masahiro Goto",
year = "2009",
month = "8",
day = "13",
doi = "10.1252/jcej.08we314",
language = "English",
volume = "42",
pages = "520--530",
journal = "Journal of Chemical Engineering of Japan",
issn = "0021-9592",
publisher = "Society of Chemical Engineers, Japan",
number = "7",

}

TY - JOUR

T1 - A comparative study of SPG membrane emulsification in the presence and absence of continuous-phase flow

AU - Kukizaki, Masato

AU - Goto, Masahiro

PY - 2009/8/13

Y1 - 2009/8/13

N2 - Membrane emulsification using Shirasu porous glass (SPG) membranes is a promising technique for preparing uniformly sized emulsion droplets and has potential applications in many fields. In this study, to gain further insight into droplet formation behavior from SPG membranes in the absence of continuous-phase flow, a comparative investigation of droplet formation behavior with and without water phase flow was carried out in an oil-in-water emulsion system consisting of soybean oil and 1 wt/v % polyoxyethylene(20)sorbitan monooleate (Tween 80) aqueous solution. In the absence of water phase flow, uniformly sized oil droplets with a mean diameter of 9.88 μm and a diameter distribution span of 0.62 were spontaneously formed from the pore openings of an SPG membrane with a mean pore diameter of 3.04 μm. Under these conditions, the various forces acting on a droplet formed at a pore opening were estimated from the dimensionless numbers (Bond, Capillary and Weber numbers). The estimation results indicated that oil-water interfacial tension is the dominating force for the spontaneous droplet detachment, due to the fact that the oil phase distorted by the tortuous pores is transformed into spherical droplets by the interfacial tension. In the presence of water phase flow, uniform oil droplets with a mean diameter of 8.63 μm and a diameter distribution span of 0.43 were detached from the same membrane by the shear force caused by the water phase flow before growing enough at the pore openings. The absence of water phase flow resulted in an increase in the proportion of active pores, compared to the presence of water phase flow. This is because, in the latter case, the oil droplets at the pore openings are deformed by the water phase flow, and thus the effect of steric hindrance between the neighboring droplets becomes greater.

AB - Membrane emulsification using Shirasu porous glass (SPG) membranes is a promising technique for preparing uniformly sized emulsion droplets and has potential applications in many fields. In this study, to gain further insight into droplet formation behavior from SPG membranes in the absence of continuous-phase flow, a comparative investigation of droplet formation behavior with and without water phase flow was carried out in an oil-in-water emulsion system consisting of soybean oil and 1 wt/v % polyoxyethylene(20)sorbitan monooleate (Tween 80) aqueous solution. In the absence of water phase flow, uniformly sized oil droplets with a mean diameter of 9.88 μm and a diameter distribution span of 0.62 were spontaneously formed from the pore openings of an SPG membrane with a mean pore diameter of 3.04 μm. Under these conditions, the various forces acting on a droplet formed at a pore opening were estimated from the dimensionless numbers (Bond, Capillary and Weber numbers). The estimation results indicated that oil-water interfacial tension is the dominating force for the spontaneous droplet detachment, due to the fact that the oil phase distorted by the tortuous pores is transformed into spherical droplets by the interfacial tension. In the presence of water phase flow, uniform oil droplets with a mean diameter of 8.63 μm and a diameter distribution span of 0.43 were detached from the same membrane by the shear force caused by the water phase flow before growing enough at the pore openings. The absence of water phase flow resulted in an increase in the proportion of active pores, compared to the presence of water phase flow. This is because, in the latter case, the oil droplets at the pore openings are deformed by the water phase flow, and thus the effect of steric hindrance between the neighboring droplets becomes greater.

UR - http://www.scopus.com/inward/record.url?scp=68349094161&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68349094161&partnerID=8YFLogxK

U2 - 10.1252/jcej.08we314

DO - 10.1252/jcej.08we314

M3 - Article

AN - SCOPUS:68349094161

VL - 42

SP - 520

EP - 530

JO - Journal of Chemical Engineering of Japan

JF - Journal of Chemical Engineering of Japan

SN - 0021-9592

IS - 7

ER -