A comprehensive approach for wind power plant potential assessment, application to northwestern Iran

Saeid Mohammadzadeh Bina, Saeid Jalilinasrabady, Hikari Fujii, Hadi Farabi-Asl

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

In the current study, the techno-environmental and economic feasibility analysis was conducted for prospective wind power plants in North West Iran. In order to assess the most appropriate and prospective wind farms, a Multi Criteria Decision Making (MCDM) technique in ArcGIS was used by applying the most important and effective environmental and technical criteria in the study area. Then, the obtained areas were classified on the basis of International Electrotechnical Commission (IEC) turbine classes using the wind speed map of the country to select the most appropriate wind turbine technology. The Weibull function was applied to model the wind behavior using actual meteorological data. The best fitted Weibull parameters including shape factor and mean wind speed were used in System Advisor Model (SAM) software to calculate the capacity factor for the three most promising regions of the study area at three different mast heights. The results indicated that around 9116 km2 was available as suitable area for wind turbine class III power plant implementation. Turbine Vestas V47 was chosen in order to estimate the amount of annual output energy, according to the achieved capacity factors condition. The total potential of annual generation was estimated to be 11,180.17 GWh, which can cover the majority of energy demand in the area. Finally, economic evaluation for this turbine showed that the generated power cost is around 0.15 $/kWh (4350 IRR/kWh). In the last step of this study, the amount of greenhouse gases reduction was calculated for each site.

Original languageEnglish
Pages (from-to)344-358
Number of pages15
JournalEnergy
Volume164
DOIs
Publication statusPublished - Dec 1 2018

Fingerprint

Wind power
Power plants
Turbines
Wind turbines
Economic analysis
Greenhouse gases
Farms
Decision making
Economics
Costs

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Building and Construction
  • Pollution
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

A comprehensive approach for wind power plant potential assessment, application to northwestern Iran. / Mohammadzadeh Bina, Saeid; Jalilinasrabady, Saeid; Fujii, Hikari; Farabi-Asl, Hadi.

In: Energy, Vol. 164, 01.12.2018, p. 344-358.

Research output: Contribution to journalArticle

Mohammadzadeh Bina, Saeid ; Jalilinasrabady, Saeid ; Fujii, Hikari ; Farabi-Asl, Hadi. / A comprehensive approach for wind power plant potential assessment, application to northwestern Iran. In: Energy. 2018 ; Vol. 164. pp. 344-358.
@article{3862664c7ebe43659947aca71787addf,
title = "A comprehensive approach for wind power plant potential assessment, application to northwestern Iran",
abstract = "In the current study, the techno-environmental and economic feasibility analysis was conducted for prospective wind power plants in North West Iran. In order to assess the most appropriate and prospective wind farms, a Multi Criteria Decision Making (MCDM) technique in ArcGIS was used by applying the most important and effective environmental and technical criteria in the study area. Then, the obtained areas were classified on the basis of International Electrotechnical Commission (IEC) turbine classes using the wind speed map of the country to select the most appropriate wind turbine technology. The Weibull function was applied to model the wind behavior using actual meteorological data. The best fitted Weibull parameters including shape factor and mean wind speed were used in System Advisor Model (SAM) software to calculate the capacity factor for the three most promising regions of the study area at three different mast heights. The results indicated that around 9116 km2 was available as suitable area for wind turbine class III power plant implementation. Turbine Vestas V47 was chosen in order to estimate the amount of annual output energy, according to the achieved capacity factors condition. The total potential of annual generation was estimated to be 11,180.17 GWh, which can cover the majority of energy demand in the area. Finally, economic evaluation for this turbine showed that the generated power cost is around 0.15 $/kWh (4350 IRR/kWh). In the last step of this study, the amount of greenhouse gases reduction was calculated for each site.",
author = "{Mohammadzadeh Bina}, Saeid and Saeid Jalilinasrabady and Hikari Fujii and Hadi Farabi-Asl",
year = "2018",
month = "12",
day = "1",
doi = "10.1016/j.energy.2018.08.211",
language = "English",
volume = "164",
pages = "344--358",
journal = "Energy",
issn = "0360-5442",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - A comprehensive approach for wind power plant potential assessment, application to northwestern Iran

AU - Mohammadzadeh Bina, Saeid

AU - Jalilinasrabady, Saeid

AU - Fujii, Hikari

AU - Farabi-Asl, Hadi

PY - 2018/12/1

Y1 - 2018/12/1

N2 - In the current study, the techno-environmental and economic feasibility analysis was conducted for prospective wind power plants in North West Iran. In order to assess the most appropriate and prospective wind farms, a Multi Criteria Decision Making (MCDM) technique in ArcGIS was used by applying the most important and effective environmental and technical criteria in the study area. Then, the obtained areas were classified on the basis of International Electrotechnical Commission (IEC) turbine classes using the wind speed map of the country to select the most appropriate wind turbine technology. The Weibull function was applied to model the wind behavior using actual meteorological data. The best fitted Weibull parameters including shape factor and mean wind speed were used in System Advisor Model (SAM) software to calculate the capacity factor for the three most promising regions of the study area at three different mast heights. The results indicated that around 9116 km2 was available as suitable area for wind turbine class III power plant implementation. Turbine Vestas V47 was chosen in order to estimate the amount of annual output energy, according to the achieved capacity factors condition. The total potential of annual generation was estimated to be 11,180.17 GWh, which can cover the majority of energy demand in the area. Finally, economic evaluation for this turbine showed that the generated power cost is around 0.15 $/kWh (4350 IRR/kWh). In the last step of this study, the amount of greenhouse gases reduction was calculated for each site.

AB - In the current study, the techno-environmental and economic feasibility analysis was conducted for prospective wind power plants in North West Iran. In order to assess the most appropriate and prospective wind farms, a Multi Criteria Decision Making (MCDM) technique in ArcGIS was used by applying the most important and effective environmental and technical criteria in the study area. Then, the obtained areas were classified on the basis of International Electrotechnical Commission (IEC) turbine classes using the wind speed map of the country to select the most appropriate wind turbine technology. The Weibull function was applied to model the wind behavior using actual meteorological data. The best fitted Weibull parameters including shape factor and mean wind speed were used in System Advisor Model (SAM) software to calculate the capacity factor for the three most promising regions of the study area at three different mast heights. The results indicated that around 9116 km2 was available as suitable area for wind turbine class III power plant implementation. Turbine Vestas V47 was chosen in order to estimate the amount of annual output energy, according to the achieved capacity factors condition. The total potential of annual generation was estimated to be 11,180.17 GWh, which can cover the majority of energy demand in the area. Finally, economic evaluation for this turbine showed that the generated power cost is around 0.15 $/kWh (4350 IRR/kWh). In the last step of this study, the amount of greenhouse gases reduction was calculated for each site.

UR - http://www.scopus.com/inward/record.url?scp=85053028897&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053028897&partnerID=8YFLogxK

U2 - 10.1016/j.energy.2018.08.211

DO - 10.1016/j.energy.2018.08.211

M3 - Article

VL - 164

SP - 344

EP - 358

JO - Energy

JF - Energy

SN - 0360-5442

ER -