A constant-head pumping test method using direct-push equipment for in situ hydraulic conductivity measurements

T. Kobayashi, H. Onoue, S. Oba, Noriyuki Yasufuku, K. Omine

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

A novel direct-push (DP) probe was developed for in situ hydraulic conductivity measurements in unconfined sandy aquifers. It is a small-diameter tool with an intake screen and a built-in pressure transducer, and is directly pushed into the ground. Hydraulic conductivity k is estimated by pumping from an aquifer through the intake screen and, while doing so, measuring flow rate and water pressure. This paper describes first the DP system and then the procedures for estimating k values. The finite-element method was employed to obtain intake factors that correlate the measurements with the k values, and these intake factors were compared with those proposed for conventional borehole packer tests. Laboratory and field experiments were also performed to assess the usability of the DP equipment. The results showed that the k estimates obtained from the new probe agreed with those obtained by other methods. The results of this assessment indicate that the proposed DP technique is a promising tool for simple and rapid in situ measurements of hydraulic conductivity. Limitations to the technology are discussed, and further work is suggested.

Original languageEnglish
Pages (from-to)253-262
Number of pages10
JournalGeotechnique
Volume62
Issue number3
DOIs
Publication statusPublished - Mar 1 2012

Fingerprint

Hydraulic conductivity
hydraulic conductivity
pumping
Aquifers
probe
aquifer
Packers
Pressure transducers
transducer
Boreholes
in situ measurement
finite element method
borehole
Flow rate
Finite element method
test
in situ
method
Water
Experiments

All Science Journal Classification (ASJC) codes

  • Geotechnical Engineering and Engineering Geology
  • Earth and Planetary Sciences (miscellaneous)

Cite this

A constant-head pumping test method using direct-push equipment for in situ hydraulic conductivity measurements. / Kobayashi, T.; Onoue, H.; Oba, S.; Yasufuku, Noriyuki; Omine, K.

In: Geotechnique, Vol. 62, No. 3, 01.03.2012, p. 253-262.

Research output: Contribution to journalArticle

@article{4b9a5600c4794635b13a5df470e7677d,
title = "A constant-head pumping test method using direct-push equipment for in situ hydraulic conductivity measurements",
abstract = "A novel direct-push (DP) probe was developed for in situ hydraulic conductivity measurements in unconfined sandy aquifers. It is a small-diameter tool with an intake screen and a built-in pressure transducer, and is directly pushed into the ground. Hydraulic conductivity k is estimated by pumping from an aquifer through the intake screen and, while doing so, measuring flow rate and water pressure. This paper describes first the DP system and then the procedures for estimating k values. The finite-element method was employed to obtain intake factors that correlate the measurements with the k values, and these intake factors were compared with those proposed for conventional borehole packer tests. Laboratory and field experiments were also performed to assess the usability of the DP equipment. The results showed that the k estimates obtained from the new probe agreed with those obtained by other methods. The results of this assessment indicate that the proposed DP technique is a promising tool for simple and rapid in situ measurements of hydraulic conductivity. Limitations to the technology are discussed, and further work is suggested.",
author = "T. Kobayashi and H. Onoue and S. Oba and Noriyuki Yasufuku and K. Omine",
year = "2012",
month = "3",
day = "1",
doi = "10.1680/geot.9.P.150",
language = "English",
volume = "62",
pages = "253--262",
journal = "Geotechnique",
issn = "0016-8505",
publisher = "ICE Publishing Ltd.",
number = "3",

}

TY - JOUR

T1 - A constant-head pumping test method using direct-push equipment for in situ hydraulic conductivity measurements

AU - Kobayashi, T.

AU - Onoue, H.

AU - Oba, S.

AU - Yasufuku, Noriyuki

AU - Omine, K.

PY - 2012/3/1

Y1 - 2012/3/1

N2 - A novel direct-push (DP) probe was developed for in situ hydraulic conductivity measurements in unconfined sandy aquifers. It is a small-diameter tool with an intake screen and a built-in pressure transducer, and is directly pushed into the ground. Hydraulic conductivity k is estimated by pumping from an aquifer through the intake screen and, while doing so, measuring flow rate and water pressure. This paper describes first the DP system and then the procedures for estimating k values. The finite-element method was employed to obtain intake factors that correlate the measurements with the k values, and these intake factors were compared with those proposed for conventional borehole packer tests. Laboratory and field experiments were also performed to assess the usability of the DP equipment. The results showed that the k estimates obtained from the new probe agreed with those obtained by other methods. The results of this assessment indicate that the proposed DP technique is a promising tool for simple and rapid in situ measurements of hydraulic conductivity. Limitations to the technology are discussed, and further work is suggested.

AB - A novel direct-push (DP) probe was developed for in situ hydraulic conductivity measurements in unconfined sandy aquifers. It is a small-diameter tool with an intake screen and a built-in pressure transducer, and is directly pushed into the ground. Hydraulic conductivity k is estimated by pumping from an aquifer through the intake screen and, while doing so, measuring flow rate and water pressure. This paper describes first the DP system and then the procedures for estimating k values. The finite-element method was employed to obtain intake factors that correlate the measurements with the k values, and these intake factors were compared with those proposed for conventional borehole packer tests. Laboratory and field experiments were also performed to assess the usability of the DP equipment. The results showed that the k estimates obtained from the new probe agreed with those obtained by other methods. The results of this assessment indicate that the proposed DP technique is a promising tool for simple and rapid in situ measurements of hydraulic conductivity. Limitations to the technology are discussed, and further work is suggested.

UR - http://www.scopus.com/inward/record.url?scp=84863247207&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863247207&partnerID=8YFLogxK

U2 - 10.1680/geot.9.P.150

DO - 10.1680/geot.9.P.150

M3 - Article

AN - SCOPUS:84863247207

VL - 62

SP - 253

EP - 262

JO - Geotechnique

JF - Geotechnique

SN - 0016-8505

IS - 3

ER -