A dense NASICON sheet prepared by tape-casting and low temperature sintering

Keisuke Okubo, He Wang, Katsuro Hayashi, Miki Inada, Naoya Enomoto, George Hasegawa, Takashi Osawa, Hitoshi Takamura

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

Ceramic sheet of Na+ ion-conducting solid electrolyte, Na3Zr2Si2PO12 (NASICON), has been prepared by tape-casting method. Addition of 60Na2O-10Nb2O5-30P2O5 glass as a sintering aid is crucial for fabrication of fully-densified impermeable sheet. Otherwise the gas tightness is not achieved even sintered at 1200 °C. The best preparation condition is 5 or 10 wt% grass-addition with respect to NASICON and sintering at 1000–1100 °C, which is lower by 100–200 °C than the typical densification temperature of NASICON without the additive. A sample with a thickness of 35 μm and total conductivity of 4.4 × 10−4 S cm−1 is obtained by 5 wt% glass addition and sintering at 1100 °C for 4 h.

Original languageEnglish
Pages (from-to)176-181
Number of pages6
JournalElectrochimica Acta
Volume278
DOIs
Publication statusPublished - Jul 10 2018

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Electrochemistry

Fingerprint Dive into the research topics of 'A dense NASICON sheet prepared by tape-casting and low temperature sintering'. Together they form a unique fingerprint.

  • Cite this