A numerical simulation of PM adhesion characteristics in a fluidized bed type PM removal device by a finite volume Eulerian-Eulerian method

Tsuyoshi Yamamoto, Takahiro Tsuboi, June Tatebayashi

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Fluidized bed has been used in a PM removal device to remove PM2.5 effectively through the use of adhesion force, experimentally demonstrating the capability for effective PM2.5 removal. In the present work, numerical simulations of this device have been performed using the Eulerian-Eulerian method for the further development of this device. The results obtained by the Gidaspow drag force model and using the EMMS method are compared to the reference data to verify the drag force model, and it is shown that the EMMS method is better than the Gidaspow drag force model. The filtration mechanism of Clift et al. was incorporated in the simulation code to calculate the behavior of PM adhesion in the fluidized bed type PM removal device. However, the predicted results differ substantially from the experimental results. Therefore, a PM adhesion model that considers PM deposition has been incorporated in the simulation code, and numerical simulations have been conducted to analyze the behavior of PM adhesion in the fluidized bed type PM removal device. It was found that these numerical simulations represent the characteristics of PM adhesion in the fluidized bed type PM removal device with a high degree of accuracy. The predicted results show that PM adheres mainly to the surface of the bed particle at the high volume fraction of the bed particle phase and is approximately uniformly collected over the entire bed particle phase.

Original languageEnglish
Pages (from-to)26-34
Number of pages9
JournalPowder Technology
Volume288
DOIs
Publication statusPublished - Jan 1 2016

Fingerprint

Fluidized beds
Adhesion
Computer simulation
Drag
Volume fraction

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)

Cite this

A numerical simulation of PM adhesion characteristics in a fluidized bed type PM removal device by a finite volume Eulerian-Eulerian method. / Yamamoto, Tsuyoshi; Tsuboi, Takahiro; Tatebayashi, June.

In: Powder Technology, Vol. 288, 01.01.2016, p. 26-34.

Research output: Contribution to journalArticle

@article{4575e0de1be74ed2936d185ebc9dc531,
title = "A numerical simulation of PM adhesion characteristics in a fluidized bed type PM removal device by a finite volume Eulerian-Eulerian method",
abstract = "Fluidized bed has been used in a PM removal device to remove PM2.5 effectively through the use of adhesion force, experimentally demonstrating the capability for effective PM2.5 removal. In the present work, numerical simulations of this device have been performed using the Eulerian-Eulerian method for the further development of this device. The results obtained by the Gidaspow drag force model and using the EMMS method are compared to the reference data to verify the drag force model, and it is shown that the EMMS method is better than the Gidaspow drag force model. The filtration mechanism of Clift et al. was incorporated in the simulation code to calculate the behavior of PM adhesion in the fluidized bed type PM removal device. However, the predicted results differ substantially from the experimental results. Therefore, a PM adhesion model that considers PM deposition has been incorporated in the simulation code, and numerical simulations have been conducted to analyze the behavior of PM adhesion in the fluidized bed type PM removal device. It was found that these numerical simulations represent the characteristics of PM adhesion in the fluidized bed type PM removal device with a high degree of accuracy. The predicted results show that PM adheres mainly to the surface of the bed particle at the high volume fraction of the bed particle phase and is approximately uniformly collected over the entire bed particle phase.",
author = "Tsuyoshi Yamamoto and Takahiro Tsuboi and June Tatebayashi",
year = "2016",
month = "1",
day = "1",
doi = "10.1016/j.powtec.2015.10.033",
language = "English",
volume = "288",
pages = "26--34",
journal = "Powder Technology",
issn = "0032-5910",
publisher = "Elsevier",

}

TY - JOUR

T1 - A numerical simulation of PM adhesion characteristics in a fluidized bed type PM removal device by a finite volume Eulerian-Eulerian method

AU - Yamamoto, Tsuyoshi

AU - Tsuboi, Takahiro

AU - Tatebayashi, June

PY - 2016/1/1

Y1 - 2016/1/1

N2 - Fluidized bed has been used in a PM removal device to remove PM2.5 effectively through the use of adhesion force, experimentally demonstrating the capability for effective PM2.5 removal. In the present work, numerical simulations of this device have been performed using the Eulerian-Eulerian method for the further development of this device. The results obtained by the Gidaspow drag force model and using the EMMS method are compared to the reference data to verify the drag force model, and it is shown that the EMMS method is better than the Gidaspow drag force model. The filtration mechanism of Clift et al. was incorporated in the simulation code to calculate the behavior of PM adhesion in the fluidized bed type PM removal device. However, the predicted results differ substantially from the experimental results. Therefore, a PM adhesion model that considers PM deposition has been incorporated in the simulation code, and numerical simulations have been conducted to analyze the behavior of PM adhesion in the fluidized bed type PM removal device. It was found that these numerical simulations represent the characteristics of PM adhesion in the fluidized bed type PM removal device with a high degree of accuracy. The predicted results show that PM adheres mainly to the surface of the bed particle at the high volume fraction of the bed particle phase and is approximately uniformly collected over the entire bed particle phase.

AB - Fluidized bed has been used in a PM removal device to remove PM2.5 effectively through the use of adhesion force, experimentally demonstrating the capability for effective PM2.5 removal. In the present work, numerical simulations of this device have been performed using the Eulerian-Eulerian method for the further development of this device. The results obtained by the Gidaspow drag force model and using the EMMS method are compared to the reference data to verify the drag force model, and it is shown that the EMMS method is better than the Gidaspow drag force model. The filtration mechanism of Clift et al. was incorporated in the simulation code to calculate the behavior of PM adhesion in the fluidized bed type PM removal device. However, the predicted results differ substantially from the experimental results. Therefore, a PM adhesion model that considers PM deposition has been incorporated in the simulation code, and numerical simulations have been conducted to analyze the behavior of PM adhesion in the fluidized bed type PM removal device. It was found that these numerical simulations represent the characteristics of PM adhesion in the fluidized bed type PM removal device with a high degree of accuracy. The predicted results show that PM adheres mainly to the surface of the bed particle at the high volume fraction of the bed particle phase and is approximately uniformly collected over the entire bed particle phase.

UR - http://www.scopus.com/inward/record.url?scp=84945548768&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84945548768&partnerID=8YFLogxK

U2 - 10.1016/j.powtec.2015.10.033

DO - 10.1016/j.powtec.2015.10.033

M3 - Article

AN - SCOPUS:84945548768

VL - 288

SP - 26

EP - 34

JO - Powder Technology

JF - Powder Technology

SN - 0032-5910

ER -