A simple conducted noise modeling method for DC-DC converters with accurate noise source model

Baihua Zhang, Shuaitao Zhang, Masahito Shoyama, Eiji Takegami

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

In this study, a simple conducted noise modeling method based on classical frequency domain modeling concept is developed. Compared with conventional methods, the accuracy of noise source model in the proposed modeling method is improved by using S-shape waveform model with the consideration of high frequency ringing waveforms. The parameters of noise source model are extracted on the basis of experimental measured waveforms. Finally, the accuracy of the proposed conducted noise modeling method is validated on a DC-DC boost converter, the comparison between measured and calculated conducted noise spectra show that the low frequency (0.15 MHz-2 MHz) noise peaks as well as high frequency (10 MHz-30MHz) peak can be accurately predicted.

Original languageEnglish
Pages (from-to)9-15
Number of pages7
JournalResearch Reports on Information Science and Electrical Engineering of Kyushu University
Volume24
Issue number1
Publication statusPublished - Jan 25 2019

Fingerprint

DC-DC converters

All Science Journal Classification (ASJC) codes

  • Computer Science(all)
  • Electrical and Electronic Engineering

Cite this

A simple conducted noise modeling method for DC-DC converters with accurate noise source model. / Zhang, Baihua; Zhang, Shuaitao; Shoyama, Masahito; Takegami, Eiji.

In: Research Reports on Information Science and Electrical Engineering of Kyushu University, Vol. 24, No. 1, 25.01.2019, p. 9-15.

Research output: Contribution to journalArticle

@article{ff9482ac5ae8425fa6e9768e51d67c9f,
title = "A simple conducted noise modeling method for DC-DC converters with accurate noise source model",
abstract = "In this study, a simple conducted noise modeling method based on classical frequency domain modeling concept is developed. Compared with conventional methods, the accuracy of noise source model in the proposed modeling method is improved by using S-shape waveform model with the consideration of high frequency ringing waveforms. The parameters of noise source model are extracted on the basis of experimental measured waveforms. Finally, the accuracy of the proposed conducted noise modeling method is validated on a DC-DC boost converter, the comparison between measured and calculated conducted noise spectra show that the low frequency (0.15 MHz-2 MHz) noise peaks as well as high frequency (10 MHz-30MHz) peak can be accurately predicted.",
author = "Baihua Zhang and Shuaitao Zhang and Masahito Shoyama and Eiji Takegami",
year = "2019",
month = "1",
day = "25",
language = "English",
volume = "24",
pages = "9--15",
journal = "Research Reports on Information Science and Electrical Engineering of Kyushu University",
issn = "1342-3819",
publisher = "Kyushu University, Faculty of Science",
number = "1",

}

TY - JOUR

T1 - A simple conducted noise modeling method for DC-DC converters with accurate noise source model

AU - Zhang, Baihua

AU - Zhang, Shuaitao

AU - Shoyama, Masahito

AU - Takegami, Eiji

PY - 2019/1/25

Y1 - 2019/1/25

N2 - In this study, a simple conducted noise modeling method based on classical frequency domain modeling concept is developed. Compared with conventional methods, the accuracy of noise source model in the proposed modeling method is improved by using S-shape waveform model with the consideration of high frequency ringing waveforms. The parameters of noise source model are extracted on the basis of experimental measured waveforms. Finally, the accuracy of the proposed conducted noise modeling method is validated on a DC-DC boost converter, the comparison between measured and calculated conducted noise spectra show that the low frequency (0.15 MHz-2 MHz) noise peaks as well as high frequency (10 MHz-30MHz) peak can be accurately predicted.

AB - In this study, a simple conducted noise modeling method based on classical frequency domain modeling concept is developed. Compared with conventional methods, the accuracy of noise source model in the proposed modeling method is improved by using S-shape waveform model with the consideration of high frequency ringing waveforms. The parameters of noise source model are extracted on the basis of experimental measured waveforms. Finally, the accuracy of the proposed conducted noise modeling method is validated on a DC-DC boost converter, the comparison between measured and calculated conducted noise spectra show that the low frequency (0.15 MHz-2 MHz) noise peaks as well as high frequency (10 MHz-30MHz) peak can be accurately predicted.

UR - http://www.scopus.com/inward/record.url?scp=85060698820&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85060698820&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:85060698820

VL - 24

SP - 9

EP - 15

JO - Research Reports on Information Science and Electrical Engineering of Kyushu University

JF - Research Reports on Information Science and Electrical Engineering of Kyushu University

SN - 1342-3819

IS - 1

ER -