A study of hybrid friction damper used aluminum alloy

Masakazu Terai, Takanori Sato, Tomokazu Yoshioka, Koichi Minami

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Authors have proposed High tension bolted friction slip damper with much higher friction coefficients than conventional ones, so the dynamic loading tests have conducted by using the bolted friction slip connection specimens that sandwiched aluminum alloy sliding plates, hi addition, for stabilization of frictional slipping behavior, specimens were also sandwiched by rubber washers. The purpose of this study is a proposal of new hybrid friction damper, which absorbs the vibration energy on both wind load and seismic load. In this paper, in order to describe the charcteristics of this damper, dainamic loading tests were conducted and an anlysis model of the damper was also proposed.

Original languageEnglish
Pages (from-to)2037-2044
Number of pages8
JournalJournal of Structural and Construction Engineering
Volume73
Issue number633
DOIs
Publication statusPublished - Nov 1 2008

Fingerprint

Aluminum alloys
Friction
Washers
Rubber
Stabilization

All Science Journal Classification (ASJC) codes

  • Architecture
  • Building and Construction

Cite this

A study of hybrid friction damper used aluminum alloy. / Terai, Masakazu; Sato, Takanori; Yoshioka, Tomokazu; Minami, Koichi.

In: Journal of Structural and Construction Engineering, Vol. 73, No. 633, 01.11.2008, p. 2037-2044.

Research output: Contribution to journalArticle

Terai, Masakazu ; Sato, Takanori ; Yoshioka, Tomokazu ; Minami, Koichi. / A study of hybrid friction damper used aluminum alloy. In: Journal of Structural and Construction Engineering. 2008 ; Vol. 73, No. 633. pp. 2037-2044.
@article{7c3887eeea2d4b0aabe91b2bfa55a04b,
title = "A study of hybrid friction damper used aluminum alloy",
abstract = "Authors have proposed High tension bolted friction slip damper with much higher friction coefficients than conventional ones, so the dynamic loading tests have conducted by using the bolted friction slip connection specimens that sandwiched aluminum alloy sliding plates, hi addition, for stabilization of frictional slipping behavior, specimens were also sandwiched by rubber washers. The purpose of this study is a proposal of new hybrid friction damper, which absorbs the vibration energy on both wind load and seismic load. In this paper, in order to describe the charcteristics of this damper, dainamic loading tests were conducted and an anlysis model of the damper was also proposed.",
author = "Masakazu Terai and Takanori Sato and Tomokazu Yoshioka and Koichi Minami",
year = "2008",
month = "11",
day = "1",
doi = "10.3130/aijs.73.2037",
language = "English",
volume = "73",
pages = "2037--2044",
journal = "Journal of Structural and Construction Engineering",
issn = "1340-4202",
publisher = "日本建築学会",
number = "633",

}

TY - JOUR

T1 - A study of hybrid friction damper used aluminum alloy

AU - Terai, Masakazu

AU - Sato, Takanori

AU - Yoshioka, Tomokazu

AU - Minami, Koichi

PY - 2008/11/1

Y1 - 2008/11/1

N2 - Authors have proposed High tension bolted friction slip damper with much higher friction coefficients than conventional ones, so the dynamic loading tests have conducted by using the bolted friction slip connection specimens that sandwiched aluminum alloy sliding plates, hi addition, for stabilization of frictional slipping behavior, specimens were also sandwiched by rubber washers. The purpose of this study is a proposal of new hybrid friction damper, which absorbs the vibration energy on both wind load and seismic load. In this paper, in order to describe the charcteristics of this damper, dainamic loading tests were conducted and an anlysis model of the damper was also proposed.

AB - Authors have proposed High tension bolted friction slip damper with much higher friction coefficients than conventional ones, so the dynamic loading tests have conducted by using the bolted friction slip connection specimens that sandwiched aluminum alloy sliding plates, hi addition, for stabilization of frictional slipping behavior, specimens were also sandwiched by rubber washers. The purpose of this study is a proposal of new hybrid friction damper, which absorbs the vibration energy on both wind load and seismic load. In this paper, in order to describe the charcteristics of this damper, dainamic loading tests were conducted and an anlysis model of the damper was also proposed.

UR - http://www.scopus.com/inward/record.url?scp=79954531886&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79954531886&partnerID=8YFLogxK

U2 - 10.3130/aijs.73.2037

DO - 10.3130/aijs.73.2037

M3 - Article

VL - 73

SP - 2037

EP - 2044

JO - Journal of Structural and Construction Engineering

JF - Journal of Structural and Construction Engineering

SN - 1340-4202

IS - 633

ER -