A study on reduction of aerodynamic heating load by film cooling

Shigeru Aso, Toshiteru Mitomo, Tomonori Naka, Yashiko Nakamura, Takuji Kurotaki, Ryujiro Kurosaki, Masayuki Katayama

Research output: Contribution to conferencePaper

Abstract

Aerodynamic heating due to heat protection problems due to film cooling on blunt bodies are experimentally and computationally investigated. Experiments are conducted by using a conventional shock tunnel. Testing conditions are at freestream Mach number M = 4.25, P0 = 0.45 ~ 0.60 MPa, T0 = 408 ~ 449 K and Reynolds number = 4.4 ~ 5.4 × 105. For the experiments on heat protection with film cooling a semi-sphere model is used and at 24 degrees location from the top of the model a cooling air is supplied through slot. In the experiments two ways of mass bleeding of tangential and normal directions from the model surface have been conducted and the results with both directions are compared. In the both directions significant decreases of surface heat flux have been obtained and tangential mass bleeding is proved to be more effective on heat protection. The results show the mass addition is quite significant in reducing aerodynamic heating at the nose of the blunt body. Also numerical simulations on heat protection with film cooling have been conducted. As the mass flow rate is increased, surface heat flux is reduced. The results show good agreements with experiments qualitatively.

Original languageEnglish
Publication statusPublished - Jan 1 1995
Event30th Thermophysics Conference, 1995 - San Diego, United States
Duration: Jun 19 1995Jun 22 1995

Other

Other30th Thermophysics Conference, 1995
CountryUnited States
CitySan Diego
Period6/19/956/22/95

Fingerprint

Aerodynamic heating
Cooling
Heat flux
Experiments
Mach number
Tunnels
Reynolds number
Flow rate
Hot Temperature
Computer simulation
Testing
Air

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Aso, S., Mitomo, T., Naka, T., Nakamura, Y., Kurotaki, T., Kurosaki, R., & Katayama, M. (1995). A study on reduction of aerodynamic heating load by film cooling. Paper presented at 30th Thermophysics Conference, 1995, San Diego, United States.

A study on reduction of aerodynamic heating load by film cooling. / Aso, Shigeru; Mitomo, Toshiteru; Naka, Tomonori; Nakamura, Yashiko; Kurotaki, Takuji; Kurosaki, Ryujiro; Katayama, Masayuki.

1995. Paper presented at 30th Thermophysics Conference, 1995, San Diego, United States.

Research output: Contribution to conferencePaper

Aso, S, Mitomo, T, Naka, T, Nakamura, Y, Kurotaki, T, Kurosaki, R & Katayama, M 1995, 'A study on reduction of aerodynamic heating load by film cooling' Paper presented at 30th Thermophysics Conference, 1995, San Diego, United States, 6/19/95 - 6/22/95, .
Aso S, Mitomo T, Naka T, Nakamura Y, Kurotaki T, Kurosaki R et al. A study on reduction of aerodynamic heating load by film cooling. 1995. Paper presented at 30th Thermophysics Conference, 1995, San Diego, United States.
Aso, Shigeru ; Mitomo, Toshiteru ; Naka, Tomonori ; Nakamura, Yashiko ; Kurotaki, Takuji ; Kurosaki, Ryujiro ; Katayama, Masayuki. / A study on reduction of aerodynamic heating load by film cooling. Paper presented at 30th Thermophysics Conference, 1995, San Diego, United States.
@conference{2a4cb0b270144f92a02b707675aab089,
title = "A study on reduction of aerodynamic heating load by film cooling",
abstract = "Aerodynamic heating due to heat protection problems due to film cooling on blunt bodies are experimentally and computationally investigated. Experiments are conducted by using a conventional shock tunnel. Testing conditions are at freestream Mach number M = 4.25, P0 = 0.45 ~ 0.60 MPa, T0 = 408 ~ 449 K and Reynolds number = 4.4 ~ 5.4 × 105. For the experiments on heat protection with film cooling a semi-sphere model is used and at 24 degrees location from the top of the model a cooling air is supplied through slot. In the experiments two ways of mass bleeding of tangential and normal directions from the model surface have been conducted and the results with both directions are compared. In the both directions significant decreases of surface heat flux have been obtained and tangential mass bleeding is proved to be more effective on heat protection. The results show the mass addition is quite significant in reducing aerodynamic heating at the nose of the blunt body. Also numerical simulations on heat protection with film cooling have been conducted. As the mass flow rate is increased, surface heat flux is reduced. The results show good agreements with experiments qualitatively.",
author = "Shigeru Aso and Toshiteru Mitomo and Tomonori Naka and Yashiko Nakamura and Takuji Kurotaki and Ryujiro Kurosaki and Masayuki Katayama",
year = "1995",
month = "1",
day = "1",
language = "English",
note = "30th Thermophysics Conference, 1995 ; Conference date: 19-06-1995 Through 22-06-1995",

}

TY - CONF

T1 - A study on reduction of aerodynamic heating load by film cooling

AU - Aso, Shigeru

AU - Mitomo, Toshiteru

AU - Naka, Tomonori

AU - Nakamura, Yashiko

AU - Kurotaki, Takuji

AU - Kurosaki, Ryujiro

AU - Katayama, Masayuki

PY - 1995/1/1

Y1 - 1995/1/1

N2 - Aerodynamic heating due to heat protection problems due to film cooling on blunt bodies are experimentally and computationally investigated. Experiments are conducted by using a conventional shock tunnel. Testing conditions are at freestream Mach number M = 4.25, P0 = 0.45 ~ 0.60 MPa, T0 = 408 ~ 449 K and Reynolds number = 4.4 ~ 5.4 × 105. For the experiments on heat protection with film cooling a semi-sphere model is used and at 24 degrees location from the top of the model a cooling air is supplied through slot. In the experiments two ways of mass bleeding of tangential and normal directions from the model surface have been conducted and the results with both directions are compared. In the both directions significant decreases of surface heat flux have been obtained and tangential mass bleeding is proved to be more effective on heat protection. The results show the mass addition is quite significant in reducing aerodynamic heating at the nose of the blunt body. Also numerical simulations on heat protection with film cooling have been conducted. As the mass flow rate is increased, surface heat flux is reduced. The results show good agreements with experiments qualitatively.

AB - Aerodynamic heating due to heat protection problems due to film cooling on blunt bodies are experimentally and computationally investigated. Experiments are conducted by using a conventional shock tunnel. Testing conditions are at freestream Mach number M = 4.25, P0 = 0.45 ~ 0.60 MPa, T0 = 408 ~ 449 K and Reynolds number = 4.4 ~ 5.4 × 105. For the experiments on heat protection with film cooling a semi-sphere model is used and at 24 degrees location from the top of the model a cooling air is supplied through slot. In the experiments two ways of mass bleeding of tangential and normal directions from the model surface have been conducted and the results with both directions are compared. In the both directions significant decreases of surface heat flux have been obtained and tangential mass bleeding is proved to be more effective on heat protection. The results show the mass addition is quite significant in reducing aerodynamic heating at the nose of the blunt body. Also numerical simulations on heat protection with film cooling have been conducted. As the mass flow rate is increased, surface heat flux is reduced. The results show good agreements with experiments qualitatively.

UR - http://www.scopus.com/inward/record.url?scp=84968583490&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84968583490&partnerID=8YFLogxK

M3 - Paper

ER -