A transceiver pic for bidirectional optical communication fabricated by bandgap energy controlled selective movpe

Takeshi Takeuchi, Tatsuya Sasaki, Kiichi Hamamoto, Masako Hayashi, Kikuo Makita, Kenkou Taguchi, Keiro Komatsu

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

SUMMARY As a low-cost optical transceiver for access network systemswe propose a new monolithic transceiver photonic integrated circuit (PIC) fabricated by bandgap energy controlled selective metalorganic vapor phase epitaxy (MOVPE). In the PICall optical components are monolithically integrated. Thusthe number of optical alignment points is significantly reduced and the assembly costs of the module is Decreased compared to those of hybrid modulesthat use silica waveguides. Moreoverby using selective MOVPEextremely low-loss buried heterostructure waveguides can be fabricated without any etching. In-plane bandgap energy control is also possibleallowing the formation of active and passive core layers simultaneously without complicated fabrication. The transceiver PIC showed fiber-coupled output power of more than l mW and receiver bandwidth of 7 GHz. Modulation and detection operations at 500 Mb/s were also demonstrated. As a cost effective fabrication technique for monolithic PICsbandgap energy controlled selective MOVPE is a promising candidate.

Original languageEnglish
Pages (from-to)54-60
Number of pages7
JournalIEICE Transactions on Electronics
VolumeE80-C
Issue number1
Publication statusPublished - Jan 1 1997
Externally publishedYes

Fingerprint

Optical communication
Transceivers
Metallorganic vapor phase epitaxy
Energy gap
Photonics
Integrated circuits
Waveguides
Optical transceivers
Costs
Fabrication
Optical fiber coupling
Power control
Silicon Dioxide
Heterojunctions
Etching
Silica
Modulation
Bandwidth

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Takeuchi, T., Sasaki, T., Hamamoto, K., Hayashi, M., Makita, K., Taguchi, K., & Komatsu, K. (1997). A transceiver pic for bidirectional optical communication fabricated by bandgap energy controlled selective movpe. IEICE Transactions on Electronics, E80-C(1), 54-60.

A transceiver pic for bidirectional optical communication fabricated by bandgap energy controlled selective movpe. / Takeuchi, Takeshi; Sasaki, Tatsuya; Hamamoto, Kiichi; Hayashi, Masako; Makita, Kikuo; Taguchi, Kenkou; Komatsu, Keiro.

In: IEICE Transactions on Electronics, Vol. E80-C, No. 1, 01.01.1997, p. 54-60.

Research output: Contribution to journalArticle

Takeuchi, T, Sasaki, T, Hamamoto, K, Hayashi, M, Makita, K, Taguchi, K & Komatsu, K 1997, 'A transceiver pic for bidirectional optical communication fabricated by bandgap energy controlled selective movpe', IEICE Transactions on Electronics, vol. E80-C, no. 1, pp. 54-60.
Takeuchi, Takeshi ; Sasaki, Tatsuya ; Hamamoto, Kiichi ; Hayashi, Masako ; Makita, Kikuo ; Taguchi, Kenkou ; Komatsu, Keiro. / A transceiver pic for bidirectional optical communication fabricated by bandgap energy controlled selective movpe. In: IEICE Transactions on Electronics. 1997 ; Vol. E80-C, No. 1. pp. 54-60.
@article{63c0a3b178754f77ae4af839b22c8fa7,
title = "A transceiver pic for bidirectional optical communication fabricated by bandgap energy controlled selective movpe",
abstract = "SUMMARY As a low-cost optical transceiver for access network systemswe propose a new monolithic transceiver photonic integrated circuit (PIC) fabricated by bandgap energy controlled selective metalorganic vapor phase epitaxy (MOVPE). In the PICall optical components are monolithically integrated. Thusthe number of optical alignment points is significantly reduced and the assembly costs of the module is Decreased compared to those of hybrid modulesthat use silica waveguides. Moreoverby using selective MOVPEextremely low-loss buried heterostructure waveguides can be fabricated without any etching. In-plane bandgap energy control is also possibleallowing the formation of active and passive core layers simultaneously without complicated fabrication. The transceiver PIC showed fiber-coupled output power of more than l mW and receiver bandwidth of 7 GHz. Modulation and detection operations at 500 Mb/s were also demonstrated. As a cost effective fabrication technique for monolithic PICsbandgap energy controlled selective MOVPE is a promising candidate.",
author = "Takeshi Takeuchi and Tatsuya Sasaki and Kiichi Hamamoto and Masako Hayashi and Kikuo Makita and Kenkou Taguchi and Keiro Komatsu",
year = "1997",
month = "1",
day = "1",
language = "English",
volume = "E80-C",
pages = "54--60",
journal = "IEICE Transactions on Electronics",
issn = "0916-8524",
publisher = "The Institute of Electronics, Information and Communication Engineers (IEICE)",
number = "1",

}

TY - JOUR

T1 - A transceiver pic for bidirectional optical communication fabricated by bandgap energy controlled selective movpe

AU - Takeuchi, Takeshi

AU - Sasaki, Tatsuya

AU - Hamamoto, Kiichi

AU - Hayashi, Masako

AU - Makita, Kikuo

AU - Taguchi, Kenkou

AU - Komatsu, Keiro

PY - 1997/1/1

Y1 - 1997/1/1

N2 - SUMMARY As a low-cost optical transceiver for access network systemswe propose a new monolithic transceiver photonic integrated circuit (PIC) fabricated by bandgap energy controlled selective metalorganic vapor phase epitaxy (MOVPE). In the PICall optical components are monolithically integrated. Thusthe number of optical alignment points is significantly reduced and the assembly costs of the module is Decreased compared to those of hybrid modulesthat use silica waveguides. Moreoverby using selective MOVPEextremely low-loss buried heterostructure waveguides can be fabricated without any etching. In-plane bandgap energy control is also possibleallowing the formation of active and passive core layers simultaneously without complicated fabrication. The transceiver PIC showed fiber-coupled output power of more than l mW and receiver bandwidth of 7 GHz. Modulation and detection operations at 500 Mb/s were also demonstrated. As a cost effective fabrication technique for monolithic PICsbandgap energy controlled selective MOVPE is a promising candidate.

AB - SUMMARY As a low-cost optical transceiver for access network systemswe propose a new monolithic transceiver photonic integrated circuit (PIC) fabricated by bandgap energy controlled selective metalorganic vapor phase epitaxy (MOVPE). In the PICall optical components are monolithically integrated. Thusthe number of optical alignment points is significantly reduced and the assembly costs of the module is Decreased compared to those of hybrid modulesthat use silica waveguides. Moreoverby using selective MOVPEextremely low-loss buried heterostructure waveguides can be fabricated without any etching. In-plane bandgap energy control is also possibleallowing the formation of active and passive core layers simultaneously without complicated fabrication. The transceiver PIC showed fiber-coupled output power of more than l mW and receiver bandwidth of 7 GHz. Modulation and detection operations at 500 Mb/s were also demonstrated. As a cost effective fabrication technique for monolithic PICsbandgap energy controlled selective MOVPE is a promising candidate.

UR - http://www.scopus.com/inward/record.url?scp=0030697031&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030697031&partnerID=8YFLogxK

M3 - Article

VL - E80-C

SP - 54

EP - 60

JO - IEICE Transactions on Electronics

JF - IEICE Transactions on Electronics

SN - 0916-8524

IS - 1

ER -