Alloy design of 5%Mn-Cr-C system austenitic steel

Hirokazu Tsukahara, Takuro Masumura, Toshihiro Tsuchiyama, Setsuo Takaki, Koichi Nakashima, Kazukuni Hase, Shigeru Endo

Research output: Contribution to journalArticle

Abstract

The range of chemical composition for obtaining austenitic single structure was defined in medium-manganese carbon steels. Among the defined composition, Fe-5%Mn-4%Cr-(0.8~1.4)%C was selected as the optimum range of composition to form stable austenitic structure. The tensile property and deformation substructure were investigated in the austenitic steels with corresponding composition. As a result, the work hardening behavior of the steels was varied depending on the carbon content, which was closely related with the development of deformation microstructure. In the 0.8%C steel, deformation-induced martensitic transformation as well as deformation twinning caused large work hardening until fracture took place. With increasing carbon content, namely increasing SFE, the deformation mode tended to shift to dislocation slipping, resulting in the lower work hardening rate. This trend seems to be similar to conventional TWIP steel where the work hardening behavior is explained with SFE.

Original languageEnglish
Pages (from-to)509-516
Number of pages8
JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume99
Issue number8
DOIs
Publication statusPublished - Sep 3 2013

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Alloy design of 5%Mn-Cr-C system austenitic steel'. Together they form a unique fingerprint.

  • Cite this