An entropy generation and genetic algorithm optimization of two-bed adsorption cooling cycle

A. Myat, Thu Kyaw, K. C. Ng, Y. D. Kim

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

This article presents the performance analysis of adsorption cooling, shortly AD, system using a thermodynamic framework with an entropy generation analysis. The model captures the transient and the cyclic steady-state performances of the adsorption-desorption cycles operating under assorted heat source temperatures. Type-RD silica gel, with a pore surface area of 720 m2/g and diameters 0.4-0.7 mm, is used as an adsorbent and its high affinity for thewater vapour adsorbate gives a high equilibrium uptake. The key advantages of the AD are (a) it has no moving parts rendering less maintenance and (b) the energy efficient means of cooling by the adsorption process with a low-temperature heat source and (c) it is environmental friendly with low carbon footprint. By incorporating the genetic algorithm onto the entropy minimization technique, it is possible to locate the optimal system performance point or the global minima with respect to entropy generation using the system parameters such as coolant and heat source water temperatures, heat transfer areas, etc. The system analysis shows that the minimization of entropy generation in the AD cycle leads to the maximization of the coefficient of performance and this translates into a higher delivery of useful cooling effects at the particular input resource temperature.

Original languageEnglish
Pages (from-to)142-156
Number of pages15
JournalProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Volume226
Issue number2
DOIs
Publication statusPublished - May 1 2012
Externally publishedYes

Fingerprint

Entropy
Genetic algorithms
Cooling
Adsorption
Carbon footprint
Temperature
Optimal systems
Silica gel
Adsorbates
Coolants
Adsorbents
Desorption
Systems analysis
Vapors
Thermodynamics
Heat transfer
Hot Temperature
Water

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

@article{75eeda1b888e4f5fa57401fc9d9cd7a9,
title = "An entropy generation and genetic algorithm optimization of two-bed adsorption cooling cycle",
abstract = "This article presents the performance analysis of adsorption cooling, shortly AD, system using a thermodynamic framework with an entropy generation analysis. The model captures the transient and the cyclic steady-state performances of the adsorption-desorption cycles operating under assorted heat source temperatures. Type-RD silica gel, with a pore surface area of 720 m2/g and diameters 0.4-0.7 mm, is used as an adsorbent and its high affinity for thewater vapour adsorbate gives a high equilibrium uptake. The key advantages of the AD are (a) it has no moving parts rendering less maintenance and (b) the energy efficient means of cooling by the adsorption process with a low-temperature heat source and (c) it is environmental friendly with low carbon footprint. By incorporating the genetic algorithm onto the entropy minimization technique, it is possible to locate the optimal system performance point or the global minima with respect to entropy generation using the system parameters such as coolant and heat source water temperatures, heat transfer areas, etc. The system analysis shows that the minimization of entropy generation in the AD cycle leads to the maximization of the coefficient of performance and this translates into a higher delivery of useful cooling effects at the particular input resource temperature.",
author = "A. Myat and Thu Kyaw and Ng, {K. C.} and Kim, {Y. D.}",
year = "2012",
month = "5",
day = "1",
doi = "10.1177/0954408911416439",
language = "English",
volume = "226",
pages = "142--156",
journal = "Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering",
issn = "0954-4089",
publisher = "SAGE Publications Inc.",
number = "2",

}

TY - JOUR

T1 - An entropy generation and genetic algorithm optimization of two-bed adsorption cooling cycle

AU - Myat, A.

AU - Kyaw, Thu

AU - Ng, K. C.

AU - Kim, Y. D.

PY - 2012/5/1

Y1 - 2012/5/1

N2 - This article presents the performance analysis of adsorption cooling, shortly AD, system using a thermodynamic framework with an entropy generation analysis. The model captures the transient and the cyclic steady-state performances of the adsorption-desorption cycles operating under assorted heat source temperatures. Type-RD silica gel, with a pore surface area of 720 m2/g and diameters 0.4-0.7 mm, is used as an adsorbent and its high affinity for thewater vapour adsorbate gives a high equilibrium uptake. The key advantages of the AD are (a) it has no moving parts rendering less maintenance and (b) the energy efficient means of cooling by the adsorption process with a low-temperature heat source and (c) it is environmental friendly with low carbon footprint. By incorporating the genetic algorithm onto the entropy minimization technique, it is possible to locate the optimal system performance point or the global minima with respect to entropy generation using the system parameters such as coolant and heat source water temperatures, heat transfer areas, etc. The system analysis shows that the minimization of entropy generation in the AD cycle leads to the maximization of the coefficient of performance and this translates into a higher delivery of useful cooling effects at the particular input resource temperature.

AB - This article presents the performance analysis of adsorption cooling, shortly AD, system using a thermodynamic framework with an entropy generation analysis. The model captures the transient and the cyclic steady-state performances of the adsorption-desorption cycles operating under assorted heat source temperatures. Type-RD silica gel, with a pore surface area of 720 m2/g and diameters 0.4-0.7 mm, is used as an adsorbent and its high affinity for thewater vapour adsorbate gives a high equilibrium uptake. The key advantages of the AD are (a) it has no moving parts rendering less maintenance and (b) the energy efficient means of cooling by the adsorption process with a low-temperature heat source and (c) it is environmental friendly with low carbon footprint. By incorporating the genetic algorithm onto the entropy minimization technique, it is possible to locate the optimal system performance point or the global minima with respect to entropy generation using the system parameters such as coolant and heat source water temperatures, heat transfer areas, etc. The system analysis shows that the minimization of entropy generation in the AD cycle leads to the maximization of the coefficient of performance and this translates into a higher delivery of useful cooling effects at the particular input resource temperature.

UR - http://www.scopus.com/inward/record.url?scp=84864435914&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84864435914&partnerID=8YFLogxK

U2 - 10.1177/0954408911416439

DO - 10.1177/0954408911416439

M3 - Article

VL - 226

SP - 142

EP - 156

JO - Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

JF - Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

SN - 0954-4089

IS - 2

ER -