Application to cleaning of waste plastic surfaces using atmospheric non-thermal plasma jets

Masayuki Araya, Toshifumi Yuji, Takayuki Watanabe, Junzou Kashihara, Yoshitake Sumida

Research output: Contribution to journalArticlepeer-review

16 Citations (Scopus)

Abstract

The removal of paint on the surface of waste plastics is difficult by the conventional process; in this research, a new cleaning mechanism using atmospheric plasmas was examined through optical emission spectroscopy, electron spectroscopy for chemical analysis, and scanning electron microscopy. Results indicate that an increase of pulse frequency enables for a short processing time for the removal of the paint film, signifying that the production of radicals in plasma, especially oxygen radicals, can be controlled by pulse frequency. Plasma jets were generated under the experimental conditions of an input power of 250 W to 400 W, a pulse frequency of 2 kHz to 12 kHz, and a plasma gas flow rate of 30 L/min. Examination of the intensity ratio of the reactive species, as measured by emission spectroscopy, showed that the O/N value increased with an increase in pulse frequency. Results of analysis with electron spectroscopy for chemical analysis show that nitrogen atoms and molybdenum in only the paint film decreased through plasma processing.

Original languageEnglish
Pages (from-to)4301-4307
Number of pages7
JournalThin Solid Films
Volume515
Issue number9
DOIs
Publication statusPublished - Mar 12 2007
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Application to cleaning of waste plastic surfaces using atmospheric non-thermal plasma jets'. Together they form a unique fingerprint.

Cite this