Basic approach to the transducer function of oxide semiconductor gas sensors

Noboru Yamazoe, Kengo Shimanoe

Research output: Contribution to journalArticle

40 Citations (Scopus)

Abstract

Transducer function was explored for oxide semiconductor gas sensors in conjunction with the receptor function of small semiconductor grains recently revealed. In these sensors, grains are in contact with their neighbors to establish a network of electron conduction paths through the contacts. Under biased conditions, applied voltage and drift current are distributed most densely at the points of contacts; the contacts are the narrowest passages for electrons while the other portions of grains are loose ones. In case the grains are uniform in every aspect of size, shape, donor density and kind of semiconductor, each contact is shown to have a conductance proportional to the surface density of electrons for the grains. The resistance of the whole device is thus inversely proportional to the surface density of electrons, in agreement with the transducer function assumed previously. In case the grains are not uniform, however, additional factors participate in determining the conductance of each contact. The energy band diagram of contacting grains is featured by the presence of a difference in conduction band edge and the generation of contact potential across the contact. It is shown that the contact potential plays a role to modulate the mobility of electrons, giving rise to an additional effect to increase the resistance of the contacts, while the conduction band edge difference is to establish exchange current in between under the non-biased condition. The influence of the contact potential on the transducer function is rather complex, being almost extinct for usual packing structures of grains, while it can be very striking for some extreme packing structures.

Original languageEnglish
Pages (from-to)1352-1362
Number of pages11
JournalSensors and Actuators, B: Chemical
Volume160
Issue number1
DOIs
Publication statusPublished - Dec 15 2011

Fingerprint

Chemical sensors
Transducers
transducers
oxides
sensors
gases
contact potentials
Electrons
Conduction bands
conduction bands
electrons
Semiconductor materials
Oxide semiconductors
conduction electrons
Band structure
energy bands
diagrams
Sensors
Electric potential
electric potential

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering
  • Materials Chemistry

Cite this

Basic approach to the transducer function of oxide semiconductor gas sensors. / Yamazoe, Noboru; Shimanoe, Kengo.

In: Sensors and Actuators, B: Chemical, Vol. 160, No. 1, 15.12.2011, p. 1352-1362.

Research output: Contribution to journalArticle

@article{dbd4f33c0d23481cacbdeca1b06d6c60,
title = "Basic approach to the transducer function of oxide semiconductor gas sensors",
abstract = "Transducer function was explored for oxide semiconductor gas sensors in conjunction with the receptor function of small semiconductor grains recently revealed. In these sensors, grains are in contact with their neighbors to establish a network of electron conduction paths through the contacts. Under biased conditions, applied voltage and drift current are distributed most densely at the points of contacts; the contacts are the narrowest passages for electrons while the other portions of grains are loose ones. In case the grains are uniform in every aspect of size, shape, donor density and kind of semiconductor, each contact is shown to have a conductance proportional to the surface density of electrons for the grains. The resistance of the whole device is thus inversely proportional to the surface density of electrons, in agreement with the transducer function assumed previously. In case the grains are not uniform, however, additional factors participate in determining the conductance of each contact. The energy band diagram of contacting grains is featured by the presence of a difference in conduction band edge and the generation of contact potential across the contact. It is shown that the contact potential plays a role to modulate the mobility of electrons, giving rise to an additional effect to increase the resistance of the contacts, while the conduction band edge difference is to establish exchange current in between under the non-biased condition. The influence of the contact potential on the transducer function is rather complex, being almost extinct for usual packing structures of grains, while it can be very striking for some extreme packing structures.",
author = "Noboru Yamazoe and Kengo Shimanoe",
year = "2011",
month = "12",
day = "15",
doi = "10.1016/j.snb.2011.09.075",
language = "English",
volume = "160",
pages = "1352--1362",
journal = "Sensors and Actuators, B: Chemical",
issn = "0925-4005",
publisher = "Elsevier",
number = "1",

}

TY - JOUR

T1 - Basic approach to the transducer function of oxide semiconductor gas sensors

AU - Yamazoe, Noboru

AU - Shimanoe, Kengo

PY - 2011/12/15

Y1 - 2011/12/15

N2 - Transducer function was explored for oxide semiconductor gas sensors in conjunction with the receptor function of small semiconductor grains recently revealed. In these sensors, grains are in contact with their neighbors to establish a network of electron conduction paths through the contacts. Under biased conditions, applied voltage and drift current are distributed most densely at the points of contacts; the contacts are the narrowest passages for electrons while the other portions of grains are loose ones. In case the grains are uniform in every aspect of size, shape, donor density and kind of semiconductor, each contact is shown to have a conductance proportional to the surface density of electrons for the grains. The resistance of the whole device is thus inversely proportional to the surface density of electrons, in agreement with the transducer function assumed previously. In case the grains are not uniform, however, additional factors participate in determining the conductance of each contact. The energy band diagram of contacting grains is featured by the presence of a difference in conduction band edge and the generation of contact potential across the contact. It is shown that the contact potential plays a role to modulate the mobility of electrons, giving rise to an additional effect to increase the resistance of the contacts, while the conduction band edge difference is to establish exchange current in between under the non-biased condition. The influence of the contact potential on the transducer function is rather complex, being almost extinct for usual packing structures of grains, while it can be very striking for some extreme packing structures.

AB - Transducer function was explored for oxide semiconductor gas sensors in conjunction with the receptor function of small semiconductor grains recently revealed. In these sensors, grains are in contact with their neighbors to establish a network of electron conduction paths through the contacts. Under biased conditions, applied voltage and drift current are distributed most densely at the points of contacts; the contacts are the narrowest passages for electrons while the other portions of grains are loose ones. In case the grains are uniform in every aspect of size, shape, donor density and kind of semiconductor, each contact is shown to have a conductance proportional to the surface density of electrons for the grains. The resistance of the whole device is thus inversely proportional to the surface density of electrons, in agreement with the transducer function assumed previously. In case the grains are not uniform, however, additional factors participate in determining the conductance of each contact. The energy band diagram of contacting grains is featured by the presence of a difference in conduction band edge and the generation of contact potential across the contact. It is shown that the contact potential plays a role to modulate the mobility of electrons, giving rise to an additional effect to increase the resistance of the contacts, while the conduction band edge difference is to establish exchange current in between under the non-biased condition. The influence of the contact potential on the transducer function is rather complex, being almost extinct for usual packing structures of grains, while it can be very striking for some extreme packing structures.

UR - http://www.scopus.com/inward/record.url?scp=81155137899&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=81155137899&partnerID=8YFLogxK

U2 - 10.1016/j.snb.2011.09.075

DO - 10.1016/j.snb.2011.09.075

M3 - Article

VL - 160

SP - 1352

EP - 1362

JO - Sensors and Actuators, B: Chemical

JF - Sensors and Actuators, B: Chemical

SN - 0925-4005

IS - 1

ER -