Blood flow sensor with built-in contact pressure and temperature sensor

Renshi Sawada, Hirofumi Nogami, R. Inoue, E. Higurashi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Measurement of blood flow is very important since it carries oxygen, nutrients, heat and information on body condition to the tissues in every corner of the body. However, their use in practice remains uncommon. This is because contact pressure has not been considered while measuring blood flow, despite the fact that blood flow is greatly affected by it. The contact pressure between the skin and the sensor is required to be measured simultaneously and at the same position with blood flow, to make the reproducibility and reliability of the measurement higher. We have developed highly reliable and highly reproducible micro blood flow sensor with a built-in contact pressure sensor and temperature sensor by adding a temperature sensor at the same position also considering the temperature highly influential in blood flow.

Original languageEnglish
Title of host publicationSymposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018
EditorsRomolo Marcelli, Yoshio Mita, Stewart Smith, Francis Pressecq, Pascal Nouet, Frederick Mailly, Peter Schneider
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1-4
Number of pages4
ISBN (Electronic)9781538661994
DOIs
Publication statusPublished - Jun 22 2018
Event20th Symposium on Design, Test, Integration and Packaging of MEMS and MOEMS, DTIP 2018 - Roma, Italy
Duration: May 22 2018May 25 2018

Other

Other20th Symposium on Design, Test, Integration and Packaging of MEMS and MOEMS, DTIP 2018
CountryItaly
CityRoma
Period5/22/185/25/18

Fingerprint

Contact sensors
Pressure sensors
temperature sensors
Temperature sensors
pressure sensors
blood flow
Blood
sensors
Sensors
nutrients
Nutrients
Skin
Tissue
Oxygen
heat
oxygen

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Mechanical Engineering
  • Safety, Risk, Reliability and Quality
  • Electronic, Optical and Magnetic Materials
  • Instrumentation

Cite this

Sawada, R., Nogami, H., Inoue, R., & Higurashi, E. (2018). Blood flow sensor with built-in contact pressure and temperature sensor. In R. Marcelli, Y. Mita, S. Smith, F. Pressecq, P. Nouet, F. Mailly, & P. Schneider (Eds.), Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018 (pp. 1-4). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/DTIP.2018.8394232

Blood flow sensor with built-in contact pressure and temperature sensor. / Sawada, Renshi; Nogami, Hirofumi; Inoue, R.; Higurashi, E.

Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018. ed. / Romolo Marcelli; Yoshio Mita; Stewart Smith; Francis Pressecq; Pascal Nouet; Frederick Mailly; Peter Schneider. Institute of Electrical and Electronics Engineers Inc., 2018. p. 1-4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sawada, R, Nogami, H, Inoue, R & Higurashi, E 2018, Blood flow sensor with built-in contact pressure and temperature sensor. in R Marcelli, Y Mita, S Smith, F Pressecq, P Nouet, F Mailly & P Schneider (eds), Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018. Institute of Electrical and Electronics Engineers Inc., pp. 1-4, 20th Symposium on Design, Test, Integration and Packaging of MEMS and MOEMS, DTIP 2018, Roma, Italy, 5/22/18. https://doi.org/10.1109/DTIP.2018.8394232
Sawada R, Nogami H, Inoue R, Higurashi E. Blood flow sensor with built-in contact pressure and temperature sensor. In Marcelli R, Mita Y, Smith S, Pressecq F, Nouet P, Mailly F, Schneider P, editors, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 1-4 https://doi.org/10.1109/DTIP.2018.8394232
Sawada, Renshi ; Nogami, Hirofumi ; Inoue, R. ; Higurashi, E. / Blood flow sensor with built-in contact pressure and temperature sensor. Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018. editor / Romolo Marcelli ; Yoshio Mita ; Stewart Smith ; Francis Pressecq ; Pascal Nouet ; Frederick Mailly ; Peter Schneider. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 1-4
@inproceedings{667be3b31d314dee932c621f813336ca,
title = "Blood flow sensor with built-in contact pressure and temperature sensor",
abstract = "Measurement of blood flow is very important since it carries oxygen, nutrients, heat and information on body condition to the tissues in every corner of the body. However, their use in practice remains uncommon. This is because contact pressure has not been considered while measuring blood flow, despite the fact that blood flow is greatly affected by it. The contact pressure between the skin and the sensor is required to be measured simultaneously and at the same position with blood flow, to make the reproducibility and reliability of the measurement higher. We have developed highly reliable and highly reproducible micro blood flow sensor with a built-in contact pressure sensor and temperature sensor by adding a temperature sensor at the same position also considering the temperature highly influential in blood flow.",
author = "Renshi Sawada and Hirofumi Nogami and R. Inoue and E. Higurashi",
year = "2018",
month = "6",
day = "22",
doi = "10.1109/DTIP.2018.8394232",
language = "English",
pages = "1--4",
editor = "Romolo Marcelli and Yoshio Mita and Stewart Smith and Francis Pressecq and Pascal Nouet and Frederick Mailly and Peter Schneider",
booktitle = "Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

TY - GEN

T1 - Blood flow sensor with built-in contact pressure and temperature sensor

AU - Sawada, Renshi

AU - Nogami, Hirofumi

AU - Inoue, R.

AU - Higurashi, E.

PY - 2018/6/22

Y1 - 2018/6/22

N2 - Measurement of blood flow is very important since it carries oxygen, nutrients, heat and information on body condition to the tissues in every corner of the body. However, their use in practice remains uncommon. This is because contact pressure has not been considered while measuring blood flow, despite the fact that blood flow is greatly affected by it. The contact pressure between the skin and the sensor is required to be measured simultaneously and at the same position with blood flow, to make the reproducibility and reliability of the measurement higher. We have developed highly reliable and highly reproducible micro blood flow sensor with a built-in contact pressure sensor and temperature sensor by adding a temperature sensor at the same position also considering the temperature highly influential in blood flow.

AB - Measurement of blood flow is very important since it carries oxygen, nutrients, heat and information on body condition to the tissues in every corner of the body. However, their use in practice remains uncommon. This is because contact pressure has not been considered while measuring blood flow, despite the fact that blood flow is greatly affected by it. The contact pressure between the skin and the sensor is required to be measured simultaneously and at the same position with blood flow, to make the reproducibility and reliability of the measurement higher. We have developed highly reliable and highly reproducible micro blood flow sensor with a built-in contact pressure sensor and temperature sensor by adding a temperature sensor at the same position also considering the temperature highly influential in blood flow.

UR - http://www.scopus.com/inward/record.url?scp=85050186900&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050186900&partnerID=8YFLogxK

U2 - 10.1109/DTIP.2018.8394232

DO - 10.1109/DTIP.2018.8394232

M3 - Conference contribution

SP - 1

EP - 4

BT - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2018

A2 - Marcelli, Romolo

A2 - Mita, Yoshio

A2 - Smith, Stewart

A2 - Pressecq, Francis

A2 - Nouet, Pascal

A2 - Mailly, Frederick

A2 - Schneider, Peter

PB - Institute of Electrical and Electronics Engineers Inc.

ER -