Calibration of heavy ion beam probe energy analyzer using mesh probe in the JFT-2M tokamak

K. Kamiya, Y. Miura, T. Ido, Y. Hamada

Research output: Contribution to journalArticle

Abstract

Mesh probe in the JFT-2M tokamak was used for the calibration of heavy ion beam probe (HIBP) energy analyzer. The slope of the normalized difference (ND) with respect to the bias voltage showed the dependence on the in-plane entrance angle to the analyzer slit. Good signal to noise ratio was obtained with a beam current of about 10 μA.

Original languageEnglish
Pages (from-to)4206-4208
Number of pages3
JournalReview of Scientific Instruments
Volume74
Issue number9
DOIs
Publication statusPublished - Sep 1 2003
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Instrumentation

Fingerprint Dive into the research topics of 'Calibration of heavy ion beam probe energy analyzer using mesh probe in the JFT-2M tokamak'. Together they form a unique fingerprint.

Cite this