Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads

Nobuaki Soh, Hideshi Nishiyama, Yasukazu Asano, Toshihiko Imato, Takashi Masadome, Youichi Kurokawa

Research output: Contribution to journalArticle

44 Citations (Scopus)

Abstract

A rapid and sensitive immunoassay for the determination of carp vitellogenin (Vg) is described. The method involves a sequential injection analysis (SIA) system equipped with a chemiluminescence detector and a samarium-cobalt magnet. An anti-Vg monoclonal antibody, immobilized on magnetic beads, was used as a solid support for the immunoassay. The introduction, trapping and release of the magnetic beads in the flow cell were controlled by a samarium-cobalt magnet and the flow of the carrier solution. The immunoassay was based on a sandwich immunoreaction of anti-Vg monoclonal antibody (primary antibody) on the magnetic beads, Vg, and the anti-Vg antibody labeled with horseradish peroxidase (HRP) (secondary antibody), and was based on a subsequent chemiluminescence reaction of HRP with hydrogen peroxide and p-iodophenol, in a luminol solution. The magnetic beads to which the primary antibody was immobilized were prepared by coupling the primary antibody with the magnetic beads after an agarose-layer on the surface of the magnetic beads was epoxidized. The primary antibody-immobilized magnetic beads were introduced, and trapped in the flow cell equipped with the samarium-cobalt magnet, a Vg sample solution, an HRP-labeled secondary antibody solution and the luminol solution were sequentially introduced into the flow cell based on an SIA programmed sequence. Chemiluminescence emission was monitored by means of a photomultiplier located at the upper side of the flow cell. The optimal incubation times both for the first and second immunoreactions were determined to be 20 min. A concave calibration curve was obtained between Vg concentration and chemiluminescence intensity when various concentrations of standard Vg samples (2-100 ng mL -1) were applied to the SIA system under optimal conditions. In spite of a narrow working range, the lower detection limit of the immunoassay was about 2 ng mL-1.

Original languageEnglish
Pages (from-to)1160-1168
Number of pages9
JournalTalanta
Volume64
Issue number5 SPEC. ISS.
DOIs
Publication statusPublished - Dec 15 2004

Fingerprint

Vitellogenins
Chemiluminescence
Luminescence
Microspheres
Immunoassay
Injections
Magnets
Antibodies
Horseradish Peroxidase
Immobilized Antibodies
Luminol
Monoclonal Antibodies
Carps
Photomultipliers
Sepharose
Hydrogen Peroxide
Calibration
Sequence Analysis
Limit of Detection
Anti-Idiotypic Antibodies

All Science Journal Classification (ASJC) codes

  • Analytical Chemistry

Cite this

Soh, N., Nishiyama, H., Asano, Y., Imato, T., Masadome, T., & Kurokawa, Y. (2004). Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads. Talanta, 64(5 SPEC. ISS.), 1160-1168. https://doi.org/10.1016/j.talanta.2004.06.001

Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads. / Soh, Nobuaki; Nishiyama, Hideshi; Asano, Yasukazu; Imato, Toshihiko; Masadome, Takashi; Kurokawa, Youichi.

In: Talanta, Vol. 64, No. 5 SPEC. ISS., 15.12.2004, p. 1160-1168.

Research output: Contribution to journalArticle

Soh, N, Nishiyama, H, Asano, Y, Imato, T, Masadome, T & Kurokawa, Y 2004, 'Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads', Talanta, vol. 64, no. 5 SPEC. ISS., pp. 1160-1168. https://doi.org/10.1016/j.talanta.2004.06.001
Soh N, Nishiyama H, Asano Y, Imato T, Masadome T, Kurokawa Y. Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads. Talanta. 2004 Dec 15;64(5 SPEC. ISS.):1160-1168. https://doi.org/10.1016/j.talanta.2004.06.001
Soh, Nobuaki ; Nishiyama, Hideshi ; Asano, Yasukazu ; Imato, Toshihiko ; Masadome, Takashi ; Kurokawa, Youichi. / Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads. In: Talanta. 2004 ; Vol. 64, No. 5 SPEC. ISS. pp. 1160-1168.
@article{c9613859fcb24a50a56a9df35a85fa44,
title = "Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads",
abstract = "A rapid and sensitive immunoassay for the determination of carp vitellogenin (Vg) is described. The method involves a sequential injection analysis (SIA) system equipped with a chemiluminescence detector and a samarium-cobalt magnet. An anti-Vg monoclonal antibody, immobilized on magnetic beads, was used as a solid support for the immunoassay. The introduction, trapping and release of the magnetic beads in the flow cell were controlled by a samarium-cobalt magnet and the flow of the carrier solution. The immunoassay was based on a sandwich immunoreaction of anti-Vg monoclonal antibody (primary antibody) on the magnetic beads, Vg, and the anti-Vg antibody labeled with horseradish peroxidase (HRP) (secondary antibody), and was based on a subsequent chemiluminescence reaction of HRP with hydrogen peroxide and p-iodophenol, in a luminol solution. The magnetic beads to which the primary antibody was immobilized were prepared by coupling the primary antibody with the magnetic beads after an agarose-layer on the surface of the magnetic beads was epoxidized. The primary antibody-immobilized magnetic beads were introduced, and trapped in the flow cell equipped with the samarium-cobalt magnet, a Vg sample solution, an HRP-labeled secondary antibody solution and the luminol solution were sequentially introduced into the flow cell based on an SIA programmed sequence. Chemiluminescence emission was monitored by means of a photomultiplier located at the upper side of the flow cell. The optimal incubation times both for the first and second immunoreactions were determined to be 20 min. A concave calibration curve was obtained between Vg concentration and chemiluminescence intensity when various concentrations of standard Vg samples (2-100 ng mL -1) were applied to the SIA system under optimal conditions. In spite of a narrow working range, the lower detection limit of the immunoassay was about 2 ng mL-1.",
author = "Nobuaki Soh and Hideshi Nishiyama and Yasukazu Asano and Toshihiko Imato and Takashi Masadome and Youichi Kurokawa",
year = "2004",
month = "12",
day = "15",
doi = "10.1016/j.talanta.2004.06.001",
language = "English",
volume = "64",
pages = "1160--1168",
journal = "Talanta",
issn = "0039-9140",
publisher = "Elsevier",
number = "5 SPEC. ISS.",

}

TY - JOUR

T1 - Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads

AU - Soh, Nobuaki

AU - Nishiyama, Hideshi

AU - Asano, Yasukazu

AU - Imato, Toshihiko

AU - Masadome, Takashi

AU - Kurokawa, Youichi

PY - 2004/12/15

Y1 - 2004/12/15

N2 - A rapid and sensitive immunoassay for the determination of carp vitellogenin (Vg) is described. The method involves a sequential injection analysis (SIA) system equipped with a chemiluminescence detector and a samarium-cobalt magnet. An anti-Vg monoclonal antibody, immobilized on magnetic beads, was used as a solid support for the immunoassay. The introduction, trapping and release of the magnetic beads in the flow cell were controlled by a samarium-cobalt magnet and the flow of the carrier solution. The immunoassay was based on a sandwich immunoreaction of anti-Vg monoclonal antibody (primary antibody) on the magnetic beads, Vg, and the anti-Vg antibody labeled with horseradish peroxidase (HRP) (secondary antibody), and was based on a subsequent chemiluminescence reaction of HRP with hydrogen peroxide and p-iodophenol, in a luminol solution. The magnetic beads to which the primary antibody was immobilized were prepared by coupling the primary antibody with the magnetic beads after an agarose-layer on the surface of the magnetic beads was epoxidized. The primary antibody-immobilized magnetic beads were introduced, and trapped in the flow cell equipped with the samarium-cobalt magnet, a Vg sample solution, an HRP-labeled secondary antibody solution and the luminol solution were sequentially introduced into the flow cell based on an SIA programmed sequence. Chemiluminescence emission was monitored by means of a photomultiplier located at the upper side of the flow cell. The optimal incubation times both for the first and second immunoreactions were determined to be 20 min. A concave calibration curve was obtained between Vg concentration and chemiluminescence intensity when various concentrations of standard Vg samples (2-100 ng mL -1) were applied to the SIA system under optimal conditions. In spite of a narrow working range, the lower detection limit of the immunoassay was about 2 ng mL-1.

AB - A rapid and sensitive immunoassay for the determination of carp vitellogenin (Vg) is described. The method involves a sequential injection analysis (SIA) system equipped with a chemiluminescence detector and a samarium-cobalt magnet. An anti-Vg monoclonal antibody, immobilized on magnetic beads, was used as a solid support for the immunoassay. The introduction, trapping and release of the magnetic beads in the flow cell were controlled by a samarium-cobalt magnet and the flow of the carrier solution. The immunoassay was based on a sandwich immunoreaction of anti-Vg monoclonal antibody (primary antibody) on the magnetic beads, Vg, and the anti-Vg antibody labeled with horseradish peroxidase (HRP) (secondary antibody), and was based on a subsequent chemiluminescence reaction of HRP with hydrogen peroxide and p-iodophenol, in a luminol solution. The magnetic beads to which the primary antibody was immobilized were prepared by coupling the primary antibody with the magnetic beads after an agarose-layer on the surface of the magnetic beads was epoxidized. The primary antibody-immobilized magnetic beads were introduced, and trapped in the flow cell equipped with the samarium-cobalt magnet, a Vg sample solution, an HRP-labeled secondary antibody solution and the luminol solution were sequentially introduced into the flow cell based on an SIA programmed sequence. Chemiluminescence emission was monitored by means of a photomultiplier located at the upper side of the flow cell. The optimal incubation times both for the first and second immunoreactions were determined to be 20 min. A concave calibration curve was obtained between Vg concentration and chemiluminescence intensity when various concentrations of standard Vg samples (2-100 ng mL -1) were applied to the SIA system under optimal conditions. In spite of a narrow working range, the lower detection limit of the immunoassay was about 2 ng mL-1.

UR - http://www.scopus.com/inward/record.url?scp=7044247306&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=7044247306&partnerID=8YFLogxK

U2 - 10.1016/j.talanta.2004.06.001

DO - 10.1016/j.talanta.2004.06.001

M3 - Article

C2 - 18969724

AN - SCOPUS:7044247306

VL - 64

SP - 1160

EP - 1168

JO - Talanta

JF - Talanta

SN - 0039-9140

IS - 5 SPEC. ISS.

ER -