Coating processes for YBa2Cu3O7-x superconductor by metalorganic deposition method using trifluoroacetates

Takeshi Araki, Haruhiko Kurosaki, Yutaka Yamada, Izumi Hirabayashi, Junko Shibata, Tsukasa Hirayama

Research output: Contribution to journalArticlepeer-review

23 Citations (Scopus)

Abstract

YBa2Cu3O7-x (YBCO) films prepared by a metalorganic deposition method using trifluoroacetats (TFA-MOD method) with spin coating have excellent properties: a critical current density (Jc) of over MA cm-2 (77 K, 0 T) and a critical temperature of over 92 K. However, films prepared by spin coating shrink at lower spinning rates or have striation at higher spinning rates. Both shrunk films and films with striation have low Jc. Moreover, even if striation is not observed by scanning electron microscopy scale observation, a structure containing pores was confirmed by transmission electron microscopy. Such pores are considered to result in a low Jc of the films. To avoid such problems we adopted dip coating as the coating process in the TFA-MOD method. The dipped YBCO films have excellent Jc compared to the spun films. A typical dipped YBCO film of 0.25 μm in thickness on LaAlO3 single-crystalline substrate has a transport Jc of 5.3 MA cm-2 (77 K, 0 T).

Original languageEnglish
Pages (from-to)783-786
Number of pages4
JournalSuperconductor Science and Technology
Volume14
Issue number9
DOIs
Publication statusPublished - Sep 2001
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Condensed Matter Physics
  • Metals and Alloys
  • Materials Chemistry
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Coating processes for YBa2Cu3O7-x superconductor by metalorganic deposition method using trifluoroacetates'. Together they form a unique fingerprint.

Cite this