Combustion Prediction of Marine Residual Oil of Low Ignitibility on Two-Component Fuel Model

Research output: Contribution to journalConference article

Abstract

The discrete multi-component model for residual heavy fuel oil (HFO), developed in the mid-2000s, proved to be a simple but practical approximation in reproduction of the combustion process of HFO sprays on a couple of CFD simulation codes. The model succeeded in providing qualitative explanation about the spray and flame progression of HFO inside constant-volume chambers (CVC), but its practical use is still underway because of its higher calculation costs. Two-component HFO model, which was introduced relatively recently, separates every spray droplet virtually into two smaller droplets of each component to calculate their evaporation process separately. The model showed good agreement with the observation results on the various HFO spray behaviors in some visualized CVCs (VCVCs). However, all the above examinations were done only qualitatively not quantitatively since the heat releases measured in the visualizing-oriented chambers of large internal volume were difficult to detect accurately. In the present study, a FIA vessel of much smaller volume was newly introduced in order to evaluate the heat release process of HFOs with good or poor fuel qualities. The results indicated strongly that the original two-component model should be modified in order to keep the compatibility with a conventional single component model and the modification was so effective in predicting the heat release rates from HFOs of different ignitability and combustibility.

Original languageEnglish
JournalSAE Technical Papers
Volume2014-October
DOIs
Publication statusPublished - Oct 13 2014
EventSAE 2014 International Powertrains, Fuels and Lubricants Meeting, FFL 2014 - Birmingham, United Kingdom
Duration: Oct 20 2014Oct 22 2014

Fingerprint

Residual fuels
Fuel oils
Flammability
Oils
Computational fluid dynamics
Evaporation
Hot Temperature
Costs

All Science Journal Classification (ASJC) codes

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Cite this

Combustion Prediction of Marine Residual Oil of Low Ignitibility on Two-Component Fuel Model. / Tajima, Hiroshi; Tsuru, Daisuke.

In: SAE Technical Papers, Vol. 2014-October, 13.10.2014.

Research output: Contribution to journalConference article

@article{037f62cdefc24db3943557817e999a55,
title = "Combustion Prediction of Marine Residual Oil of Low Ignitibility on Two-Component Fuel Model",
abstract = "The discrete multi-component model for residual heavy fuel oil (HFO), developed in the mid-2000s, proved to be a simple but practical approximation in reproduction of the combustion process of HFO sprays on a couple of CFD simulation codes. The model succeeded in providing qualitative explanation about the spray and flame progression of HFO inside constant-volume chambers (CVC), but its practical use is still underway because of its higher calculation costs. Two-component HFO model, which was introduced relatively recently, separates every spray droplet virtually into two smaller droplets of each component to calculate their evaporation process separately. The model showed good agreement with the observation results on the various HFO spray behaviors in some visualized CVCs (VCVCs). However, all the above examinations were done only qualitatively not quantitatively since the heat releases measured in the visualizing-oriented chambers of large internal volume were difficult to detect accurately. In the present study, a FIA vessel of much smaller volume was newly introduced in order to evaluate the heat release process of HFOs with good or poor fuel qualities. The results indicated strongly that the original two-component model should be modified in order to keep the compatibility with a conventional single component model and the modification was so effective in predicting the heat release rates from HFOs of different ignitability and combustibility.",
author = "Hiroshi Tajima and Daisuke Tsuru",
year = "2014",
month = "10",
day = "13",
doi = "10.4271/2014-01-2556",
language = "English",
volume = "2014-October",
journal = "SAE Technical Papers",
issn = "0148-7191",
publisher = "SAE International",

}

TY - JOUR

T1 - Combustion Prediction of Marine Residual Oil of Low Ignitibility on Two-Component Fuel Model

AU - Tajima, Hiroshi

AU - Tsuru, Daisuke

PY - 2014/10/13

Y1 - 2014/10/13

N2 - The discrete multi-component model for residual heavy fuel oil (HFO), developed in the mid-2000s, proved to be a simple but practical approximation in reproduction of the combustion process of HFO sprays on a couple of CFD simulation codes. The model succeeded in providing qualitative explanation about the spray and flame progression of HFO inside constant-volume chambers (CVC), but its practical use is still underway because of its higher calculation costs. Two-component HFO model, which was introduced relatively recently, separates every spray droplet virtually into two smaller droplets of each component to calculate their evaporation process separately. The model showed good agreement with the observation results on the various HFO spray behaviors in some visualized CVCs (VCVCs). However, all the above examinations were done only qualitatively not quantitatively since the heat releases measured in the visualizing-oriented chambers of large internal volume were difficult to detect accurately. In the present study, a FIA vessel of much smaller volume was newly introduced in order to evaluate the heat release process of HFOs with good or poor fuel qualities. The results indicated strongly that the original two-component model should be modified in order to keep the compatibility with a conventional single component model and the modification was so effective in predicting the heat release rates from HFOs of different ignitability and combustibility.

AB - The discrete multi-component model for residual heavy fuel oil (HFO), developed in the mid-2000s, proved to be a simple but practical approximation in reproduction of the combustion process of HFO sprays on a couple of CFD simulation codes. The model succeeded in providing qualitative explanation about the spray and flame progression of HFO inside constant-volume chambers (CVC), but its practical use is still underway because of its higher calculation costs. Two-component HFO model, which was introduced relatively recently, separates every spray droplet virtually into two smaller droplets of each component to calculate their evaporation process separately. The model showed good agreement with the observation results on the various HFO spray behaviors in some visualized CVCs (VCVCs). However, all the above examinations were done only qualitatively not quantitatively since the heat releases measured in the visualizing-oriented chambers of large internal volume were difficult to detect accurately. In the present study, a FIA vessel of much smaller volume was newly introduced in order to evaluate the heat release process of HFOs with good or poor fuel qualities. The results indicated strongly that the original two-component model should be modified in order to keep the compatibility with a conventional single component model and the modification was so effective in predicting the heat release rates from HFOs of different ignitability and combustibility.

UR - http://www.scopus.com/inward/record.url?scp=84938519175&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84938519175&partnerID=8YFLogxK

U2 - 10.4271/2014-01-2556

DO - 10.4271/2014-01-2556

M3 - Conference article

AN - SCOPUS:84938519175

VL - 2014-October

JO - SAE Technical Papers

JF - SAE Technical Papers

SN - 0148-7191

ER -