Comparative design study for power reduction in organic optoelectronic pulse meter sensor

Fahed Elsamnah, Anubha Bilgaiyan, Muhamad Affiq, Chang Hoon Shim, Hiroshi Ishidai, Reiji Hattori

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper demonstrated a new design structure for minimizing the power consumption of a pulse meter. Monolithic devices composed of a red (625 nm) organic light-emitting diode (OLED) and an organic photodiode (OPD) were fabricated on the same substrate. Two organic devices were designed differently. One had a circle-shaped OLED in the center of the device and was surrounded by the OPD, while the other had the opposite structure. The external quantum efficiency (EQE) of the OLED and the OPD were 7% and 37%, respectively. We evaluated and compared the signal-to-noise ratio (SNR) of the photoplethysmogram (PPG) signal on different parts of the body and successfully acquired clear PPG signals at those positions, where the best signal was obtained from the fingertip at a SNR of about 62 dB. The proposed organic pulse meter sensor was operated successfully with a power consumption of 0.1 mW. Eventually, the proposed organic biosensor reduced the power consumption and improved the capability of the pulse meter for long-term use.

Original languageEnglish
Article number48
JournalBiosensors
Volume9
Issue number2
DOIs
Publication statusPublished - Jun 1 2019

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Clinical Biochemistry

Cite this