Computational and experimental analysis of a high-performance airfoil under low-reynolds-number flow condition

Masayuki Anyoji, Taku Nonomura, Hikaru Aono, Akira Oyama, Kozo Fujii, Hiroki Nagai, Keisuke Asai

Research output: Contribution to journalArticle

32 Citations (Scopus)

Abstract

A high-performance Ishii airfoil was analyzed using both a wind-tunnel and large-eddy simulations at a low- Reynolds-number condition (Re = 23,000). The design guidelines for an airfoil shape with a high lift-to-drag ratio under the aforementioned condition are described by analyses of flowfields and aerodynamic characteristics of the Ishii airfoil. Compared with conventional airfoils, such as the NACA 0012 and NACA 0002, the shape characteristic effects of the Ishii airfoil on its flowfield and aerodynamic characteristics are discussed. The shape on the suction side of the Ishii airfoil can cause delays in the flow separation at low angle of attacks. The separated flow reattaches, and a separation bubble forms even when trailing-edge separation changes to leading-edge separation. The separation bubble contributes to an increase in lift coefficient. In addition, the Ishii airfoil can gain a high positive pressure on the pressure side as compared with the other two symmetric airfoils due to the camber near the trailing edge.Onthe other hand, the pressure drag of the Ishii airfoil, which is a dominant factor of total drag, is considerably smaller than those of the other two airfoils. It was found that the shape on the suction side as well as that on the pressure side (such as the leading-edge roundness and the camber) are very significant in the low-Reynolds-number airfoil with a high lift-todrag ratio.

Original languageEnglish
Pages (from-to)1864-1872
Number of pages9
JournalJournal of Aircraft
Volume51
Issue number6
DOIs
Publication statusPublished - Nov 1 2014

Fingerprint

Airfoils
Reynolds number
Drag
Cambers
Aerodynamics
Flow separation
Large eddy simulation
Angle of attack
Wind tunnels

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering

Cite this

Computational and experimental analysis of a high-performance airfoil under low-reynolds-number flow condition. / Anyoji, Masayuki; Nonomura, Taku; Aono, Hikaru; Oyama, Akira; Fujii, Kozo; Nagai, Hiroki; Asai, Keisuke.

In: Journal of Aircraft, Vol. 51, No. 6, 01.11.2014, p. 1864-1872.

Research output: Contribution to journalArticle

Anyoji, Masayuki ; Nonomura, Taku ; Aono, Hikaru ; Oyama, Akira ; Fujii, Kozo ; Nagai, Hiroki ; Asai, Keisuke. / Computational and experimental analysis of a high-performance airfoil under low-reynolds-number flow condition. In: Journal of Aircraft. 2014 ; Vol. 51, No. 6. pp. 1864-1872.
@article{75e56dcb142542008cfe6c1b680040bc,
title = "Computational and experimental analysis of a high-performance airfoil under low-reynolds-number flow condition",
abstract = "A high-performance Ishii airfoil was analyzed using both a wind-tunnel and large-eddy simulations at a low- Reynolds-number condition (Re = 23,000). The design guidelines for an airfoil shape with a high lift-to-drag ratio under the aforementioned condition are described by analyses of flowfields and aerodynamic characteristics of the Ishii airfoil. Compared with conventional airfoils, such as the NACA 0012 and NACA 0002, the shape characteristic effects of the Ishii airfoil on its flowfield and aerodynamic characteristics are discussed. The shape on the suction side of the Ishii airfoil can cause delays in the flow separation at low angle of attacks. The separated flow reattaches, and a separation bubble forms even when trailing-edge separation changes to leading-edge separation. The separation bubble contributes to an increase in lift coefficient. In addition, the Ishii airfoil can gain a high positive pressure on the pressure side as compared with the other two symmetric airfoils due to the camber near the trailing edge.Onthe other hand, the pressure drag of the Ishii airfoil, which is a dominant factor of total drag, is considerably smaller than those of the other two airfoils. It was found that the shape on the suction side as well as that on the pressure side (such as the leading-edge roundness and the camber) are very significant in the low-Reynolds-number airfoil with a high lift-todrag ratio.",
author = "Masayuki Anyoji and Taku Nonomura and Hikaru Aono and Akira Oyama and Kozo Fujii and Hiroki Nagai and Keisuke Asai",
year = "2014",
month = "11",
day = "1",
doi = "10.2514/1.C032553",
language = "English",
volume = "51",
pages = "1864--1872",
journal = "Journal of Aircraft",
issn = "0021-8669",
publisher = "American Institute of Aeronautics and Astronautics Inc. (AIAA)",
number = "6",

}

TY - JOUR

T1 - Computational and experimental analysis of a high-performance airfoil under low-reynolds-number flow condition

AU - Anyoji, Masayuki

AU - Nonomura, Taku

AU - Aono, Hikaru

AU - Oyama, Akira

AU - Fujii, Kozo

AU - Nagai, Hiroki

AU - Asai, Keisuke

PY - 2014/11/1

Y1 - 2014/11/1

N2 - A high-performance Ishii airfoil was analyzed using both a wind-tunnel and large-eddy simulations at a low- Reynolds-number condition (Re = 23,000). The design guidelines for an airfoil shape with a high lift-to-drag ratio under the aforementioned condition are described by analyses of flowfields and aerodynamic characteristics of the Ishii airfoil. Compared with conventional airfoils, such as the NACA 0012 and NACA 0002, the shape characteristic effects of the Ishii airfoil on its flowfield and aerodynamic characteristics are discussed. The shape on the suction side of the Ishii airfoil can cause delays in the flow separation at low angle of attacks. The separated flow reattaches, and a separation bubble forms even when trailing-edge separation changes to leading-edge separation. The separation bubble contributes to an increase in lift coefficient. In addition, the Ishii airfoil can gain a high positive pressure on the pressure side as compared with the other two symmetric airfoils due to the camber near the trailing edge.Onthe other hand, the pressure drag of the Ishii airfoil, which is a dominant factor of total drag, is considerably smaller than those of the other two airfoils. It was found that the shape on the suction side as well as that on the pressure side (such as the leading-edge roundness and the camber) are very significant in the low-Reynolds-number airfoil with a high lift-todrag ratio.

AB - A high-performance Ishii airfoil was analyzed using both a wind-tunnel and large-eddy simulations at a low- Reynolds-number condition (Re = 23,000). The design guidelines for an airfoil shape with a high lift-to-drag ratio under the aforementioned condition are described by analyses of flowfields and aerodynamic characteristics of the Ishii airfoil. Compared with conventional airfoils, such as the NACA 0012 and NACA 0002, the shape characteristic effects of the Ishii airfoil on its flowfield and aerodynamic characteristics are discussed. The shape on the suction side of the Ishii airfoil can cause delays in the flow separation at low angle of attacks. The separated flow reattaches, and a separation bubble forms even when trailing-edge separation changes to leading-edge separation. The separation bubble contributes to an increase in lift coefficient. In addition, the Ishii airfoil can gain a high positive pressure on the pressure side as compared with the other two symmetric airfoils due to the camber near the trailing edge.Onthe other hand, the pressure drag of the Ishii airfoil, which is a dominant factor of total drag, is considerably smaller than those of the other two airfoils. It was found that the shape on the suction side as well as that on the pressure side (such as the leading-edge roundness and the camber) are very significant in the low-Reynolds-number airfoil with a high lift-todrag ratio.

UR - http://www.scopus.com/inward/record.url?scp=84914171144&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84914171144&partnerID=8YFLogxK

U2 - 10.2514/1.C032553

DO - 10.2514/1.C032553

M3 - Article

AN - SCOPUS:84914171144

VL - 51

SP - 1864

EP - 1872

JO - Journal of Aircraft

JF - Journal of Aircraft

SN - 0021-8669

IS - 6

ER -