Concentration of a plasma energy flow by a blowing gas

T. Watanabe, T. Honda, A. Kanzawa

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Experiments were carried out on the concentration of the energy flow density of a thermal argon plasma and the concentration of the heat flux from a plasma jet to a flat plate by an injected gas blowing radially inwards through a slit around the nozzle outlet. The Q-value, which is analogous to the sharpness of the resonance curve of an electrical circuit, and which is defined as the ratio of the maximum energy flow to its half width, was used to evaluate the degree of concentration achieved. Both Q values attained maxima with a radially blowing gas at about the same rate of flow.

Original languageEnglish
Pages (from-to)663-670
Number of pages8
JournalInternational chemical engineering
Volume29
Issue number4
Publication statusPublished - Oct 1 1989
Externally publishedYes

Fingerprint

Blow molding
Plasmas
Plasma jets
Gases
Heat flux
Argon
Nozzles
Networks (circuits)
Experiments
Hot Temperature

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Concentration of a plasma energy flow by a blowing gas. / Watanabe, T.; Honda, T.; Kanzawa, A.

In: International chemical engineering, Vol. 29, No. 4, 01.10.1989, p. 663-670.

Research output: Contribution to journalArticle

Watanabe, T. ; Honda, T. ; Kanzawa, A. / Concentration of a plasma energy flow by a blowing gas. In: International chemical engineering. 1989 ; Vol. 29, No. 4. pp. 663-670.
@article{0732344c83584648a54f27a262bfae1b,
title = "Concentration of a plasma energy flow by a blowing gas",
abstract = "Experiments were carried out on the concentration of the energy flow density of a thermal argon plasma and the concentration of the heat flux from a plasma jet to a flat plate by an injected gas blowing radially inwards through a slit around the nozzle outlet. The Q-value, which is analogous to the sharpness of the resonance curve of an electrical circuit, and which is defined as the ratio of the maximum energy flow to its half width, was used to evaluate the degree of concentration achieved. Both Q values attained maxima with a radially blowing gas at about the same rate of flow.",
author = "T. Watanabe and T. Honda and A. Kanzawa",
year = "1989",
month = "10",
day = "1",
language = "English",
volume = "29",
pages = "663--670",
journal = "International chemical engineering",
issn = "0020-6318",
number = "4",

}

TY - JOUR

T1 - Concentration of a plasma energy flow by a blowing gas

AU - Watanabe, T.

AU - Honda, T.

AU - Kanzawa, A.

PY - 1989/10/1

Y1 - 1989/10/1

N2 - Experiments were carried out on the concentration of the energy flow density of a thermal argon plasma and the concentration of the heat flux from a plasma jet to a flat plate by an injected gas blowing radially inwards through a slit around the nozzle outlet. The Q-value, which is analogous to the sharpness of the resonance curve of an electrical circuit, and which is defined as the ratio of the maximum energy flow to its half width, was used to evaluate the degree of concentration achieved. Both Q values attained maxima with a radially blowing gas at about the same rate of flow.

AB - Experiments were carried out on the concentration of the energy flow density of a thermal argon plasma and the concentration of the heat flux from a plasma jet to a flat plate by an injected gas blowing radially inwards through a slit around the nozzle outlet. The Q-value, which is analogous to the sharpness of the resonance curve of an electrical circuit, and which is defined as the ratio of the maximum energy flow to its half width, was used to evaluate the degree of concentration achieved. Both Q values attained maxima with a radially blowing gas at about the same rate of flow.

UR - http://www.scopus.com/inward/record.url?scp=0024753724&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024753724&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0024753724

VL - 29

SP - 663

EP - 670

JO - International chemical engineering

JF - International chemical engineering

SN - 0020-6318

IS - 4

ER -