Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy

Hasan Baig, J. Siviter, W. Li, M. C. Paul, A. Montecucco, M. H. Rolley, T. K.N. Sweet, M. Gao, P. A. Mullen, E. F. Fernandez, G. Han, D. H. Gregory, A. R. Knox, Tapas Mallick

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Concentrating sunlight and focussing it on smaller sized solar cells increases the device's power output per unit active area. However, this process tends to increase the solar cell temperature considerably and has the potential to compromise system reliability. Adding a heat exchanger system to regulate this temperature rise, can improve the electrical performance whilst simultaneously providing an additional source of low temperature heat. In this study the performance of a low concentrator photovoltaic system with thermal (LCPV/T) extraction was conceptualised and evaluated in depth. An experimental analysis was performed using a first-generation prototype consisting of 5 units of Cross Compound Parabolic Concentrators (CCPC) connected to a heat extraction unit. A bespoke rotating table was used as experimental apparatus to effectively evaluate the optical performance of the system, as a function of its angular positions to replicate the motion of actual sun. Key design performance parameters for the LCPV/T collector are presented and discussed. This work also provides a useful technique to effectively calculate system performance, as a function of the orientation-dependant electrical characterisation parameters data. Finally, a Computational Fluid Dynamics (CFD) model was also applied to investigate the efficacy of the heat exchanger and hence estimate the overall co-generation benefit of using such optimisation techniques on realistic CPV systems. It was highlighted through these simulations that the water flow rate had the potential to be a critical power-generation optimisation criterion for LCPV-T systems. The maximum power output at normal incidence with concentrators and no water flow was found to be 78.4 mW. The system was found to perform with an average electrical efficiency ranging between 10 and 16% when evaluated at five different geographic locations. Experimental analysis of the data obtained showed an increase in power of 141% (power ratio 2.41) compared to the analogous non-concentrating counterpart. For example, in the case of London which receives an annual solar radiation of 1300 kWh/m2 the system is expected to generate 210 kWh/m2. This may reduce further to include losses due to temperature, reflectance/glazing losses, and electrical losses in cabling and inverter by up to 36% leading to an annual power output of 134 kWh/m2 of module.

Original languageEnglish
Pages (from-to)547-560
Number of pages14
JournalEnergy
Volume147
DOIs
Publication statusPublished - Mar 15 2018

Fingerprint

Conceptual design
Heat exchangers
Solar cells
Temperature
Solar radiation
Sun
Power generation
Water
Dynamic models
Computational fluid dynamics
Flow rate
Hot Temperature

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Building and Construction
  • Pollution
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Baig, H., Siviter, J., Li, W., Paul, M. C., Montecucco, A., Rolley, M. H., ... Mallick, T. (2018). Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy. Energy, 147, 547-560. https://doi.org/10.1016/j.energy.2017.12.127

Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy. / Baig, Hasan; Siviter, J.; Li, W.; Paul, M. C.; Montecucco, A.; Rolley, M. H.; Sweet, T. K.N.; Gao, M.; Mullen, P. A.; Fernandez, E. F.; Han, G.; Gregory, D. H.; Knox, A. R.; Mallick, Tapas.

In: Energy, Vol. 147, 15.03.2018, p. 547-560.

Research output: Contribution to journalArticle

Baig, H, Siviter, J, Li, W, Paul, MC, Montecucco, A, Rolley, MH, Sweet, TKN, Gao, M, Mullen, PA, Fernandez, EF, Han, G, Gregory, DH, Knox, AR & Mallick, T 2018, 'Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy', Energy, vol. 147, pp. 547-560. https://doi.org/10.1016/j.energy.2017.12.127
Baig, Hasan ; Siviter, J. ; Li, W. ; Paul, M. C. ; Montecucco, A. ; Rolley, M. H. ; Sweet, T. K.N. ; Gao, M. ; Mullen, P. A. ; Fernandez, E. F. ; Han, G. ; Gregory, D. H. ; Knox, A. R. ; Mallick, Tapas. / Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy. In: Energy. 2018 ; Vol. 147. pp. 547-560.
@article{2c85c1e2ada14910a839a9b7bd37d476,
title = "Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy",
abstract = "Concentrating sunlight and focussing it on smaller sized solar cells increases the device's power output per unit active area. However, this process tends to increase the solar cell temperature considerably and has the potential to compromise system reliability. Adding a heat exchanger system to regulate this temperature rise, can improve the electrical performance whilst simultaneously providing an additional source of low temperature heat. In this study the performance of a low concentrator photovoltaic system with thermal (LCPV/T) extraction was conceptualised and evaluated in depth. An experimental analysis was performed using a first-generation prototype consisting of 5 units of Cross Compound Parabolic Concentrators (CCPC) connected to a heat extraction unit. A bespoke rotating table was used as experimental apparatus to effectively evaluate the optical performance of the system, as a function of its angular positions to replicate the motion of actual sun. Key design performance parameters for the LCPV/T collector are presented and discussed. This work also provides a useful technique to effectively calculate system performance, as a function of the orientation-dependant electrical characterisation parameters data. Finally, a Computational Fluid Dynamics (CFD) model was also applied to investigate the efficacy of the heat exchanger and hence estimate the overall co-generation benefit of using such optimisation techniques on realistic CPV systems. It was highlighted through these simulations that the water flow rate had the potential to be a critical power-generation optimisation criterion for LCPV-T systems. The maximum power output at normal incidence with concentrators and no water flow was found to be 78.4 mW. The system was found to perform with an average electrical efficiency ranging between 10 and 16{\%} when evaluated at five different geographic locations. Experimental analysis of the data obtained showed an increase in power of 141{\%} (power ratio 2.41) compared to the analogous non-concentrating counterpart. For example, in the case of London which receives an annual solar radiation of 1300 kWh/m2 the system is expected to generate 210 kWh/m2. This may reduce further to include losses due to temperature, reflectance/glazing losses, and electrical losses in cabling and inverter by up to 36{\%} leading to an annual power output of 134 kWh/m2 of module.",
author = "Hasan Baig and J. Siviter and W. Li and Paul, {M. C.} and A. Montecucco and Rolley, {M. H.} and Sweet, {T. K.N.} and M. Gao and Mullen, {P. A.} and Fernandez, {E. F.} and G. Han and Gregory, {D. H.} and Knox, {A. R.} and Tapas Mallick",
year = "2018",
month = "3",
day = "15",
doi = "10.1016/j.energy.2017.12.127",
language = "English",
volume = "147",
pages = "547--560",
journal = "Energy",
issn = "0360-5442",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Conceptual design and performance evaluation of a hybrid concentrating photovoltaic system in preparation for energy

AU - Baig, Hasan

AU - Siviter, J.

AU - Li, W.

AU - Paul, M. C.

AU - Montecucco, A.

AU - Rolley, M. H.

AU - Sweet, T. K.N.

AU - Gao, M.

AU - Mullen, P. A.

AU - Fernandez, E. F.

AU - Han, G.

AU - Gregory, D. H.

AU - Knox, A. R.

AU - Mallick, Tapas

PY - 2018/3/15

Y1 - 2018/3/15

N2 - Concentrating sunlight and focussing it on smaller sized solar cells increases the device's power output per unit active area. However, this process tends to increase the solar cell temperature considerably and has the potential to compromise system reliability. Adding a heat exchanger system to regulate this temperature rise, can improve the electrical performance whilst simultaneously providing an additional source of low temperature heat. In this study the performance of a low concentrator photovoltaic system with thermal (LCPV/T) extraction was conceptualised and evaluated in depth. An experimental analysis was performed using a first-generation prototype consisting of 5 units of Cross Compound Parabolic Concentrators (CCPC) connected to a heat extraction unit. A bespoke rotating table was used as experimental apparatus to effectively evaluate the optical performance of the system, as a function of its angular positions to replicate the motion of actual sun. Key design performance parameters for the LCPV/T collector are presented and discussed. This work also provides a useful technique to effectively calculate system performance, as a function of the orientation-dependant electrical characterisation parameters data. Finally, a Computational Fluid Dynamics (CFD) model was also applied to investigate the efficacy of the heat exchanger and hence estimate the overall co-generation benefit of using such optimisation techniques on realistic CPV systems. It was highlighted through these simulations that the water flow rate had the potential to be a critical power-generation optimisation criterion for LCPV-T systems. The maximum power output at normal incidence with concentrators and no water flow was found to be 78.4 mW. The system was found to perform with an average electrical efficiency ranging between 10 and 16% when evaluated at five different geographic locations. Experimental analysis of the data obtained showed an increase in power of 141% (power ratio 2.41) compared to the analogous non-concentrating counterpart. For example, in the case of London which receives an annual solar radiation of 1300 kWh/m2 the system is expected to generate 210 kWh/m2. This may reduce further to include losses due to temperature, reflectance/glazing losses, and electrical losses in cabling and inverter by up to 36% leading to an annual power output of 134 kWh/m2 of module.

AB - Concentrating sunlight and focussing it on smaller sized solar cells increases the device's power output per unit active area. However, this process tends to increase the solar cell temperature considerably and has the potential to compromise system reliability. Adding a heat exchanger system to regulate this temperature rise, can improve the electrical performance whilst simultaneously providing an additional source of low temperature heat. In this study the performance of a low concentrator photovoltaic system with thermal (LCPV/T) extraction was conceptualised and evaluated in depth. An experimental analysis was performed using a first-generation prototype consisting of 5 units of Cross Compound Parabolic Concentrators (CCPC) connected to a heat extraction unit. A bespoke rotating table was used as experimental apparatus to effectively evaluate the optical performance of the system, as a function of its angular positions to replicate the motion of actual sun. Key design performance parameters for the LCPV/T collector are presented and discussed. This work also provides a useful technique to effectively calculate system performance, as a function of the orientation-dependant electrical characterisation parameters data. Finally, a Computational Fluid Dynamics (CFD) model was also applied to investigate the efficacy of the heat exchanger and hence estimate the overall co-generation benefit of using such optimisation techniques on realistic CPV systems. It was highlighted through these simulations that the water flow rate had the potential to be a critical power-generation optimisation criterion for LCPV-T systems. The maximum power output at normal incidence with concentrators and no water flow was found to be 78.4 mW. The system was found to perform with an average electrical efficiency ranging between 10 and 16% when evaluated at five different geographic locations. Experimental analysis of the data obtained showed an increase in power of 141% (power ratio 2.41) compared to the analogous non-concentrating counterpart. For example, in the case of London which receives an annual solar radiation of 1300 kWh/m2 the system is expected to generate 210 kWh/m2. This may reduce further to include losses due to temperature, reflectance/glazing losses, and electrical losses in cabling and inverter by up to 36% leading to an annual power output of 134 kWh/m2 of module.

UR - http://www.scopus.com/inward/record.url?scp=85041644806&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85041644806&partnerID=8YFLogxK

U2 - 10.1016/j.energy.2017.12.127

DO - 10.1016/j.energy.2017.12.127

M3 - Article

AN - SCOPUS:85041644806

VL - 147

SP - 547

EP - 560

JO - Energy

JF - Energy

SN - 0360-5442

ER -