CONSTRUCTION OF A LARGE THIN SOLENOID MAGNET.

M. Wake, M. Sakuda, T. Matsui, Kenji Ishibashi, T. Satow, O. Asai, K. Kuno, T. Kawaguchi, K. Wakamoto, R. Fujita, H. Hirabayashi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

A large thin solenoid, VENUS, was constructed and an excitation test without iron yoke was performed. New methods to keep high transparency for particles were applied to this solenoid. These methods were developed through a small sized superconducting model and a real sized non-superconducting model. VENUS coil was fabricated by a 'welding method' which is suited for very thin solenoids. Good cooling property of the coil was obtained by this method. Long aluminum-stabilized superconducting cable was developed. An extruded hollow aluminum coil-case was used for the coil to reduce the radiation thickness. A coil support system was tested at cooldown and excitation of the coil. It did not need re-adjustment after cooldown and did not give distinguishable effects to the coil. A large outer cylinder made of CFRP was useful for the vacuum vessel needed for the transparency.

Original languageEnglish
Title of host publicationUnknown Host Publication Title
PublisherSwiss Inst for Nuclear Research
Pages178-181
Number of pages4
ISBN (Print)3907998006
Publication statusPublished - Dec 1 1985

Fingerprint

Solenoids
Magnets
Transparency
Superconducting cables
Aluminum
Carbon fiber reinforced plastics
Welding
Vacuum
Iron
Cooling
Radiation

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Wake, M., Sakuda, M., Matsui, T., Ishibashi, K., Satow, T., Asai, O., ... Hirabayashi, H. (1985). CONSTRUCTION OF A LARGE THIN SOLENOID MAGNET. In Unknown Host Publication Title (pp. 178-181). Swiss Inst for Nuclear Research.

CONSTRUCTION OF A LARGE THIN SOLENOID MAGNET. / Wake, M.; Sakuda, M.; Matsui, T.; Ishibashi, Kenji; Satow, T.; Asai, O.; Kuno, K.; Kawaguchi, T.; Wakamoto, K.; Fujita, R.; Hirabayashi, H.

Unknown Host Publication Title. Swiss Inst for Nuclear Research, 1985. p. 178-181.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wake, M, Sakuda, M, Matsui, T, Ishibashi, K, Satow, T, Asai, O, Kuno, K, Kawaguchi, T, Wakamoto, K, Fujita, R & Hirabayashi, H 1985, CONSTRUCTION OF A LARGE THIN SOLENOID MAGNET. in Unknown Host Publication Title. Swiss Inst for Nuclear Research, pp. 178-181.
Wake M, Sakuda M, Matsui T, Ishibashi K, Satow T, Asai O et al. CONSTRUCTION OF A LARGE THIN SOLENOID MAGNET. In Unknown Host Publication Title. Swiss Inst for Nuclear Research. 1985. p. 178-181
Wake, M. ; Sakuda, M. ; Matsui, T. ; Ishibashi, Kenji ; Satow, T. ; Asai, O. ; Kuno, K. ; Kawaguchi, T. ; Wakamoto, K. ; Fujita, R. ; Hirabayashi, H. / CONSTRUCTION OF A LARGE THIN SOLENOID MAGNET. Unknown Host Publication Title. Swiss Inst for Nuclear Research, 1985. pp. 178-181
@inproceedings{391e84d1dfe2419ca08a8b06e339af40,
title = "CONSTRUCTION OF A LARGE THIN SOLENOID MAGNET.",
abstract = "A large thin solenoid, VENUS, was constructed and an excitation test without iron yoke was performed. New methods to keep high transparency for particles were applied to this solenoid. These methods were developed through a small sized superconducting model and a real sized non-superconducting model. VENUS coil was fabricated by a 'welding method' which is suited for very thin solenoids. Good cooling property of the coil was obtained by this method. Long aluminum-stabilized superconducting cable was developed. An extruded hollow aluminum coil-case was used for the coil to reduce the radiation thickness. A coil support system was tested at cooldown and excitation of the coil. It did not need re-adjustment after cooldown and did not give distinguishable effects to the coil. A large outer cylinder made of CFRP was useful for the vacuum vessel needed for the transparency.",
author = "M. Wake and M. Sakuda and T. Matsui and Kenji Ishibashi and T. Satow and O. Asai and K. Kuno and T. Kawaguchi and K. Wakamoto and R. Fujita and H. Hirabayashi",
year = "1985",
month = "12",
day = "1",
language = "English",
isbn = "3907998006",
publisher = "Swiss Inst for Nuclear Research",
pages = "178--181",
booktitle = "Unknown Host Publication Title",

}

TY - GEN

T1 - CONSTRUCTION OF A LARGE THIN SOLENOID MAGNET.

AU - Wake, M.

AU - Sakuda, M.

AU - Matsui, T.

AU - Ishibashi, Kenji

AU - Satow, T.

AU - Asai, O.

AU - Kuno, K.

AU - Kawaguchi, T.

AU - Wakamoto, K.

AU - Fujita, R.

AU - Hirabayashi, H.

PY - 1985/12/1

Y1 - 1985/12/1

N2 - A large thin solenoid, VENUS, was constructed and an excitation test without iron yoke was performed. New methods to keep high transparency for particles were applied to this solenoid. These methods were developed through a small sized superconducting model and a real sized non-superconducting model. VENUS coil was fabricated by a 'welding method' which is suited for very thin solenoids. Good cooling property of the coil was obtained by this method. Long aluminum-stabilized superconducting cable was developed. An extruded hollow aluminum coil-case was used for the coil to reduce the radiation thickness. A coil support system was tested at cooldown and excitation of the coil. It did not need re-adjustment after cooldown and did not give distinguishable effects to the coil. A large outer cylinder made of CFRP was useful for the vacuum vessel needed for the transparency.

AB - A large thin solenoid, VENUS, was constructed and an excitation test without iron yoke was performed. New methods to keep high transparency for particles were applied to this solenoid. These methods were developed through a small sized superconducting model and a real sized non-superconducting model. VENUS coil was fabricated by a 'welding method' which is suited for very thin solenoids. Good cooling property of the coil was obtained by this method. Long aluminum-stabilized superconducting cable was developed. An extruded hollow aluminum coil-case was used for the coil to reduce the radiation thickness. A coil support system was tested at cooldown and excitation of the coil. It did not need re-adjustment after cooldown and did not give distinguishable effects to the coil. A large outer cylinder made of CFRP was useful for the vacuum vessel needed for the transparency.

UR - http://www.scopus.com/inward/record.url?scp=0022280460&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022280460&partnerID=8YFLogxK

M3 - Conference contribution

SN - 3907998006

SP - 178

EP - 181

BT - Unknown Host Publication Title

PB - Swiss Inst for Nuclear Research

ER -