Control of Y2O3 nanoislands deposition parameters in order to induce defects formation and its influence on the critical current density of YBCO films

P. Mele, K. Matsumoto, T. Horide, O. Miura, A. Ichinose, M. Mukaida, Y. Yoshida, S. Horii

Research output: Contribution to journalConference article

6 Citations (Scopus)

Abstract

We successfully introduced high-density linear defects as artificial pinning centers (APCs) of the quantized vortices into YBCO films, during the film deposition procedure. APCs were introduced perpendicular to the film surface by using the distributed nanosized Y2O3 islands prepared on SrTiO3(1 0 0) substrates. It is possible to induce strong changes on the shape and density of the Y2O3 islands by varying the deposition conditions. The highest Y2O3 islands density, 226/μm2, was obtained with fifteen laser pulses at 800 °C of substrate temperature. Even if only 10% of the induced defects act as effective pinning centers, Jc of YBCO film grown on the Y 2O3 nanoislands/SrTiO3 substrate increased to 1.8 × 107 A/cm2 (20 K, B∥c, 0 T), which is 1.5 times higher than that of the pure YBCO film.

Original languageEnglish
Pages (from-to)1108-1112
Number of pages5
JournalPhysica C: Superconductivity and its applications
Volume426-431
Issue numberII
DOIs
Publication statusPublished - Oct 7 2005
Externally publishedYes
EventProceedings of the 17th Internatioanl Symposium on Superconductivity (ISS 2004) Advances in Superconductivity -
Duration: Nov 23 2004Nov 25 2004

Fingerprint

critical current
current density
Defects
defects
Substrates
Laser pulses
Vortex flow
vortices
pulses
lasers
Temperature
temperature
strontium titanium oxide

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Control of Y2O3 nanoislands deposition parameters in order to induce defects formation and its influence on the critical current density of YBCO films. / Mele, P.; Matsumoto, K.; Horide, T.; Miura, O.; Ichinose, A.; Mukaida, M.; Yoshida, Y.; Horii, S.

In: Physica C: Superconductivity and its applications, Vol. 426-431, No. II, 07.10.2005, p. 1108-1112.

Research output: Contribution to journalConference article

Mele, P. ; Matsumoto, K. ; Horide, T. ; Miura, O. ; Ichinose, A. ; Mukaida, M. ; Yoshida, Y. ; Horii, S. / Control of Y2O3 nanoislands deposition parameters in order to induce defects formation and its influence on the critical current density of YBCO films. In: Physica C: Superconductivity and its applications. 2005 ; Vol. 426-431, No. II. pp. 1108-1112.
@article{e43c31ba5bb64a8393bce94d8dad65a1,
title = "Control of Y2O3 nanoislands deposition parameters in order to induce defects formation and its influence on the critical current density of YBCO films",
abstract = "We successfully introduced high-density linear defects as artificial pinning centers (APCs) of the quantized vortices into YBCO films, during the film deposition procedure. APCs were introduced perpendicular to the film surface by using the distributed nanosized Y2O3 islands prepared on SrTiO3(1 0 0) substrates. It is possible to induce strong changes on the shape and density of the Y2O3 islands by varying the deposition conditions. The highest Y2O3 islands density, 226/μm2, was obtained with fifteen laser pulses at 800 °C of substrate temperature. Even if only 10{\%} of the induced defects act as effective pinning centers, Jc of YBCO film grown on the Y 2O3 nanoislands/SrTiO3 substrate increased to 1.8 × 107 A/cm2 (20 K, B∥c, 0 T), which is 1.5 times higher than that of the pure YBCO film.",
author = "P. Mele and K. Matsumoto and T. Horide and O. Miura and A. Ichinose and M. Mukaida and Y. Yoshida and S. Horii",
year = "2005",
month = "10",
day = "7",
doi = "10.1016/j.physc.2005.03.043",
language = "English",
volume = "426-431",
pages = "1108--1112",
journal = "Physica C: Superconductivity and its Applications",
issn = "0921-4534",
publisher = "Elsevier",
number = "II",

}

TY - JOUR

T1 - Control of Y2O3 nanoislands deposition parameters in order to induce defects formation and its influence on the critical current density of YBCO films

AU - Mele, P.

AU - Matsumoto, K.

AU - Horide, T.

AU - Miura, O.

AU - Ichinose, A.

AU - Mukaida, M.

AU - Yoshida, Y.

AU - Horii, S.

PY - 2005/10/7

Y1 - 2005/10/7

N2 - We successfully introduced high-density linear defects as artificial pinning centers (APCs) of the quantized vortices into YBCO films, during the film deposition procedure. APCs were introduced perpendicular to the film surface by using the distributed nanosized Y2O3 islands prepared on SrTiO3(1 0 0) substrates. It is possible to induce strong changes on the shape and density of the Y2O3 islands by varying the deposition conditions. The highest Y2O3 islands density, 226/μm2, was obtained with fifteen laser pulses at 800 °C of substrate temperature. Even if only 10% of the induced defects act as effective pinning centers, Jc of YBCO film grown on the Y 2O3 nanoislands/SrTiO3 substrate increased to 1.8 × 107 A/cm2 (20 K, B∥c, 0 T), which is 1.5 times higher than that of the pure YBCO film.

AB - We successfully introduced high-density linear defects as artificial pinning centers (APCs) of the quantized vortices into YBCO films, during the film deposition procedure. APCs were introduced perpendicular to the film surface by using the distributed nanosized Y2O3 islands prepared on SrTiO3(1 0 0) substrates. It is possible to induce strong changes on the shape and density of the Y2O3 islands by varying the deposition conditions. The highest Y2O3 islands density, 226/μm2, was obtained with fifteen laser pulses at 800 °C of substrate temperature. Even if only 10% of the induced defects act as effective pinning centers, Jc of YBCO film grown on the Y 2O3 nanoislands/SrTiO3 substrate increased to 1.8 × 107 A/cm2 (20 K, B∥c, 0 T), which is 1.5 times higher than that of the pure YBCO film.

UR - http://www.scopus.com/inward/record.url?scp=25644438416&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=25644438416&partnerID=8YFLogxK

U2 - 10.1016/j.physc.2005.03.043

DO - 10.1016/j.physc.2005.03.043

M3 - Conference article

AN - SCOPUS:25644438416

VL - 426-431

SP - 1108

EP - 1112

JO - Physica C: Superconductivity and its Applications

JF - Physica C: Superconductivity and its Applications

SN - 0921-4534

IS - II

ER -