Critical crack size that causes retardation of short fatigue crack by single overload

Y. Kondo, T. Sudo, Masanobu Kubota

Research output: Contribution to journalArticle

Abstract

The effect of crack length on the retardation of fatigue crack propagation caused by single overload was investigated using carbon steels S25C and S45C. The retardation and crack arrest occurred even in short cracks ranging from 50 to several hundred microns. In case retardation occurs, it is caused by the increase of crack closure stress as in a long crack. The occurrence of retardation, however, showed a complex dependency on crack length, yield strength of material and the value of baseline stress ratio R . At stress ratio R =-1, retardation did not occur for very short crack as short as 50 μm in the case of low yield strength material. This was because the increase of crack closure stress was prevented by the compressive stress component of baseline load. The plastically deformed layer near the crack tip was collapsed by the compressive stress of baseline load, which prevented the development of crack closure. In the case of high yield strength material, however, retardation occurred even in 50 μm crack. On the contrary at R = 0, retardation in the low yield strength material occurred even in 50 μm crack. The prevention of increase of crack closure did not occur in the case of R = 0. As a consequence, retardation basically occurs even in short crack as short as 50 μm unless the development of crack closure is impeded.

Original languageEnglish
Pages (from-to)856-864
Number of pages9
JournalFatigue and Fracture of Engineering Materials and Structures
Volume32
Issue number10
DOIs
Publication statusPublished - Sep 25 2009

Fingerprint

Cracks
Crack closure
Yield stress
Compressive stress
Loads (forces)
Fatigue cracks
Fatigue crack propagation
Crack tips
Strength of materials
Carbon steel

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Critical crack size that causes retardation of short fatigue crack by single overload. / Kondo, Y.; Sudo, T.; Kubota, Masanobu.

In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 32, No. 10, 25.09.2009, p. 856-864.

Research output: Contribution to journalArticle

@article{edb489417504447eb3baaee08dcf8fa1,
title = "Critical crack size that causes retardation of short fatigue crack by single overload",
abstract = "The effect of crack length on the retardation of fatigue crack propagation caused by single overload was investigated using carbon steels S25C and S45C. The retardation and crack arrest occurred even in short cracks ranging from 50 to several hundred microns. In case retardation occurs, it is caused by the increase of crack closure stress as in a long crack. The occurrence of retardation, however, showed a complex dependency on crack length, yield strength of material and the value of baseline stress ratio R . At stress ratio R =-1, retardation did not occur for very short crack as short as 50 μm in the case of low yield strength material. This was because the increase of crack closure stress was prevented by the compressive stress component of baseline load. The plastically deformed layer near the crack tip was collapsed by the compressive stress of baseline load, which prevented the development of crack closure. In the case of high yield strength material, however, retardation occurred even in 50 μm crack. On the contrary at R = 0, retardation in the low yield strength material occurred even in 50 μm crack. The prevention of increase of crack closure did not occur in the case of R = 0. As a consequence, retardation basically occurs even in short crack as short as 50 μm unless the development of crack closure is impeded.",
author = "Y. Kondo and T. Sudo and Masanobu Kubota",
year = "2009",
month = "9",
day = "25",
doi = "10.1111/j.1460-2695.2009.01393.x",
language = "English",
volume = "32",
pages = "856--864",
journal = "Fatigue and Fracture of Engineering Materials and Structures",
issn = "8756-758X",
publisher = "Wiley-Blackwell",
number = "10",

}

TY - JOUR

T1 - Critical crack size that causes retardation of short fatigue crack by single overload

AU - Kondo, Y.

AU - Sudo, T.

AU - Kubota, Masanobu

PY - 2009/9/25

Y1 - 2009/9/25

N2 - The effect of crack length on the retardation of fatigue crack propagation caused by single overload was investigated using carbon steels S25C and S45C. The retardation and crack arrest occurred even in short cracks ranging from 50 to several hundred microns. In case retardation occurs, it is caused by the increase of crack closure stress as in a long crack. The occurrence of retardation, however, showed a complex dependency on crack length, yield strength of material and the value of baseline stress ratio R . At stress ratio R =-1, retardation did not occur for very short crack as short as 50 μm in the case of low yield strength material. This was because the increase of crack closure stress was prevented by the compressive stress component of baseline load. The plastically deformed layer near the crack tip was collapsed by the compressive stress of baseline load, which prevented the development of crack closure. In the case of high yield strength material, however, retardation occurred even in 50 μm crack. On the contrary at R = 0, retardation in the low yield strength material occurred even in 50 μm crack. The prevention of increase of crack closure did not occur in the case of R = 0. As a consequence, retardation basically occurs even in short crack as short as 50 μm unless the development of crack closure is impeded.

AB - The effect of crack length on the retardation of fatigue crack propagation caused by single overload was investigated using carbon steels S25C and S45C. The retardation and crack arrest occurred even in short cracks ranging from 50 to several hundred microns. In case retardation occurs, it is caused by the increase of crack closure stress as in a long crack. The occurrence of retardation, however, showed a complex dependency on crack length, yield strength of material and the value of baseline stress ratio R . At stress ratio R =-1, retardation did not occur for very short crack as short as 50 μm in the case of low yield strength material. This was because the increase of crack closure stress was prevented by the compressive stress component of baseline load. The plastically deformed layer near the crack tip was collapsed by the compressive stress of baseline load, which prevented the development of crack closure. In the case of high yield strength material, however, retardation occurred even in 50 μm crack. On the contrary at R = 0, retardation in the low yield strength material occurred even in 50 μm crack. The prevention of increase of crack closure did not occur in the case of R = 0. As a consequence, retardation basically occurs even in short crack as short as 50 μm unless the development of crack closure is impeded.

UR - http://www.scopus.com/inward/record.url?scp=70349269521&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=70349269521&partnerID=8YFLogxK

U2 - 10.1111/j.1460-2695.2009.01393.x

DO - 10.1111/j.1460-2695.2009.01393.x

M3 - Article

VL - 32

SP - 856

EP - 864

JO - Fatigue and Fracture of Engineering Materials and Structures

JF - Fatigue and Fracture of Engineering Materials and Structures

SN - 8756-758X

IS - 10

ER -