Damage behaviours of various coarse Al-Fe-Si particles in model wrought alloys

Hiroyuki Toda, Toshiro Kobayashi

Research output: Contribution to journalConference articlepeer-review

4 Citations (Scopus)

Abstract

Al-Fe(-Si) model wrought alloys are prepared which are cast at three different cooling rates on a laboratory scale. In-situ SEM observation of tensile tests has been used to observe damage behaviours of coarse intermetallic compound (IMC) particles; AlmFenSip and AlmFe which are usually observed in practical wrought aluminium alloys. Particular attention is given to the chemical composition, size and aspect ratio of each broken particle. AlFeSi particles close to Al8Fe2Si1 and Al10Fe3Si3 are formed by metal mold and Graphite mold castings, respectively, and AlFeSi particles with various composition ratios are formed by furnace cooling, then being transformed into AlFe3 by subsequent long exposure at 858 K. Almost all of the AlFeSi particles formed during the metal and Graphite mold castings remain intact, while other AlFeSi and AlmFe particles are damaged extensively. Factors affecting the in-situ strengths of the particles are discussed.

Original languageEnglish
Pages (from-to)393-398
Number of pages6
JournalMaterials Science Forum
Volume426-432
Issue number1
DOIs
Publication statusPublished - Jan 1 2003
Externally publishedYes
EventThermec 2003 Processing and Manufacturing of Advanced Materials - Madrid, Spain
Duration: Jul 7 2003Jul 11 2003

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Damage behaviours of various coarse Al-Fe-Si particles in model wrought alloys'. Together they form a unique fingerprint.

Cite this