Deformation and solidification of a droplet on a cold substrate

Takayuki Watanabe, I. Kuribayashi, T. Honda, A. Kanzawa

Research output: Contribution to journalArticlepeer-review

83 Citations (Scopus)

Abstract

The numerical simulation of a droplet deformation and solidification on a cold substrate was performed with SMAC algorithm. The substrate temperature histories and the degree of deformation were measured by use of a droplet of n-eicosane and n-cetane. The numerical results showed good agreement with the measured ones. The solidification of a droplet on a substrate occurs immediately after the deformation. A simple model to estimate the deformation and the solidification time was also proposed. Both the normalized deformation and solidification time are proportional to the 0.2 power of the Reynolds number. The solidification time is two orders of magnitude higher than the deformation time.

Original languageEnglish
Pages (from-to)3059-3065
Number of pages7
JournalChemical Engineering Science
Volume47
Issue number12
DOIs
Publication statusPublished - Jan 1 1992
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)

Fingerprint Dive into the research topics of 'Deformation and solidification of a droplet on a cold substrate'. Together they form a unique fingerprint.

Cite this