Deformation of a partially molten D″ layer by small-scale convection and the resulting seismic anisotropy and ultralow velocity zone

Tatsuto Okamoto, Ikuro Sumita, Tomoeki Nakakuki, Shigeo Yoshida

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Partially molten regions in the lowermost mantle have been inferred to exist by the discovery of the ultralow velocity zone (ULVZ). We consider a small-scale stagnant-lid convection in the D″ layer, following [Solomatov, V.S., Moresi, L.N., 2002. Small-scale convection in the D″ layer. J. Geophys. Res., 107, doi:10.1029/2000JB000063.], to investigate the relationship between partial melt and seismic anisotropies often found in the D″ layer. Such convection can bring melts in the D″ layer from the ULVZ, deform the melt inclusions, and accordingly would profoundly affect seismic structures including anisotropies. We therefore calculate the deformation history of partially molten regions at the base of the D″ layer which is heated from below, using a 2D model with a strongly temperature dependent viscosity. An initially isotropic partial melt is strongly deformed by the viscous stress caused by thermal convection, and becomes anisotropic by shape preferred orientation (SPO) of melt inclusions, whose aspect ratios are of the order of 101 to 102 at the base of the plume and become as large as 103 to 104 in the plume head. We calculate the effective elastic constants for such anisotropic media which contain deformed melt inclusions, and obtain the seismic velocity for a horizontal ray path. We find that the horizontally averaged velocity profile can be correlated with convective patterns. If melting occurs not only in the ULVZ but extends to the top of hot regions of the D″ layer, the vertical seismic profile consists of three layers corresponding to the base, conduit and head of a rising plume. The lowermost layer, which corresponds to the ULVZ, becomes strongly anisotropic with VSH > VSV. The deformation and alignment of the melt, rather than the melting itself, is primarily responsible for reducing the seismic velocity. On the other hand, in the conduit, the anisotropy is of VSV > VSH type because of vertical alignment. In the plume head, the anisotropy is of VSH > VSV type with a magnitude of about 2%. We discuss how shear wave anisotropy may be used to infer the temporal evolution of the D″ layer.

Original languageEnglish
Pages (from-to)32-48
Number of pages17
JournalPhysics of the Earth and Planetary Interiors
Volume153
Issue number1-3
DOIs
Publication statusPublished - Nov 30 2005
Externally publishedYes

Fingerprint

D region
seismic anisotropy
convection
anisotropy
plumes
melt inclusion
plume
melt
inclusions
seismic velocity
alignment
melting
anisotropic media
vertical seismic profile
free convection
thermal convection
anisotropic medium
S waves
aspect ratio
preferred orientation

All Science Journal Classification (ASJC) codes

  • Astronomy and Astrophysics
  • Geophysics
  • Physics and Astronomy (miscellaneous)
  • Space and Planetary Science

Cite this

Deformation of a partially molten D″ layer by small-scale convection and the resulting seismic anisotropy and ultralow velocity zone. / Okamoto, Tatsuto; Sumita, Ikuro; Nakakuki, Tomoeki; Yoshida, Shigeo.

In: Physics of the Earth and Planetary Interiors, Vol. 153, No. 1-3, 30.11.2005, p. 32-48.

Research output: Contribution to journalArticle

@article{0b292b3ff1a3468c8af1cf6b0ce6c2fb,
title = "Deformation of a partially molten D″ layer by small-scale convection and the resulting seismic anisotropy and ultralow velocity zone",
abstract = "Partially molten regions in the lowermost mantle have been inferred to exist by the discovery of the ultralow velocity zone (ULVZ). We consider a small-scale stagnant-lid convection in the D″ layer, following [Solomatov, V.S., Moresi, L.N., 2002. Small-scale convection in the D″ layer. J. Geophys. Res., 107, doi:10.1029/2000JB000063.], to investigate the relationship between partial melt and seismic anisotropies often found in the D″ layer. Such convection can bring melts in the D″ layer from the ULVZ, deform the melt inclusions, and accordingly would profoundly affect seismic structures including anisotropies. We therefore calculate the deformation history of partially molten regions at the base of the D″ layer which is heated from below, using a 2D model with a strongly temperature dependent viscosity. An initially isotropic partial melt is strongly deformed by the viscous stress caused by thermal convection, and becomes anisotropic by shape preferred orientation (SPO) of melt inclusions, whose aspect ratios are of the order of 101 to 102 at the base of the plume and become as large as 103 to 104 in the plume head. We calculate the effective elastic constants for such anisotropic media which contain deformed melt inclusions, and obtain the seismic velocity for a horizontal ray path. We find that the horizontally averaged velocity profile can be correlated with convective patterns. If melting occurs not only in the ULVZ but extends to the top of hot regions of the D″ layer, the vertical seismic profile consists of three layers corresponding to the base, conduit and head of a rising plume. The lowermost layer, which corresponds to the ULVZ, becomes strongly anisotropic with VSH > VSV. The deformation and alignment of the melt, rather than the melting itself, is primarily responsible for reducing the seismic velocity. On the other hand, in the conduit, the anisotropy is of VSV > VSH type because of vertical alignment. In the plume head, the anisotropy is of VSH > VSV type with a magnitude of about 2{\%}. We discuss how shear wave anisotropy may be used to infer the temporal evolution of the D″ layer.",
author = "Tatsuto Okamoto and Ikuro Sumita and Tomoeki Nakakuki and Shigeo Yoshida",
year = "2005",
month = "11",
day = "30",
doi = "10.1016/j.pepi.2005.03.018",
language = "English",
volume = "153",
pages = "32--48",
journal = "Physics of the Earth and Planetary Interiors",
issn = "0031-9201",
publisher = "Elsevier",
number = "1-3",

}

TY - JOUR

T1 - Deformation of a partially molten D″ layer by small-scale convection and the resulting seismic anisotropy and ultralow velocity zone

AU - Okamoto, Tatsuto

AU - Sumita, Ikuro

AU - Nakakuki, Tomoeki

AU - Yoshida, Shigeo

PY - 2005/11/30

Y1 - 2005/11/30

N2 - Partially molten regions in the lowermost mantle have been inferred to exist by the discovery of the ultralow velocity zone (ULVZ). We consider a small-scale stagnant-lid convection in the D″ layer, following [Solomatov, V.S., Moresi, L.N., 2002. Small-scale convection in the D″ layer. J. Geophys. Res., 107, doi:10.1029/2000JB000063.], to investigate the relationship between partial melt and seismic anisotropies often found in the D″ layer. Such convection can bring melts in the D″ layer from the ULVZ, deform the melt inclusions, and accordingly would profoundly affect seismic structures including anisotropies. We therefore calculate the deformation history of partially molten regions at the base of the D″ layer which is heated from below, using a 2D model with a strongly temperature dependent viscosity. An initially isotropic partial melt is strongly deformed by the viscous stress caused by thermal convection, and becomes anisotropic by shape preferred orientation (SPO) of melt inclusions, whose aspect ratios are of the order of 101 to 102 at the base of the plume and become as large as 103 to 104 in the plume head. We calculate the effective elastic constants for such anisotropic media which contain deformed melt inclusions, and obtain the seismic velocity for a horizontal ray path. We find that the horizontally averaged velocity profile can be correlated with convective patterns. If melting occurs not only in the ULVZ but extends to the top of hot regions of the D″ layer, the vertical seismic profile consists of three layers corresponding to the base, conduit and head of a rising plume. The lowermost layer, which corresponds to the ULVZ, becomes strongly anisotropic with VSH > VSV. The deformation and alignment of the melt, rather than the melting itself, is primarily responsible for reducing the seismic velocity. On the other hand, in the conduit, the anisotropy is of VSV > VSH type because of vertical alignment. In the plume head, the anisotropy is of VSH > VSV type with a magnitude of about 2%. We discuss how shear wave anisotropy may be used to infer the temporal evolution of the D″ layer.

AB - Partially molten regions in the lowermost mantle have been inferred to exist by the discovery of the ultralow velocity zone (ULVZ). We consider a small-scale stagnant-lid convection in the D″ layer, following [Solomatov, V.S., Moresi, L.N., 2002. Small-scale convection in the D″ layer. J. Geophys. Res., 107, doi:10.1029/2000JB000063.], to investigate the relationship between partial melt and seismic anisotropies often found in the D″ layer. Such convection can bring melts in the D″ layer from the ULVZ, deform the melt inclusions, and accordingly would profoundly affect seismic structures including anisotropies. We therefore calculate the deformation history of partially molten regions at the base of the D″ layer which is heated from below, using a 2D model with a strongly temperature dependent viscosity. An initially isotropic partial melt is strongly deformed by the viscous stress caused by thermal convection, and becomes anisotropic by shape preferred orientation (SPO) of melt inclusions, whose aspect ratios are of the order of 101 to 102 at the base of the plume and become as large as 103 to 104 in the plume head. We calculate the effective elastic constants for such anisotropic media which contain deformed melt inclusions, and obtain the seismic velocity for a horizontal ray path. We find that the horizontally averaged velocity profile can be correlated with convective patterns. If melting occurs not only in the ULVZ but extends to the top of hot regions of the D″ layer, the vertical seismic profile consists of three layers corresponding to the base, conduit and head of a rising plume. The lowermost layer, which corresponds to the ULVZ, becomes strongly anisotropic with VSH > VSV. The deformation and alignment of the melt, rather than the melting itself, is primarily responsible for reducing the seismic velocity. On the other hand, in the conduit, the anisotropy is of VSV > VSH type because of vertical alignment. In the plume head, the anisotropy is of VSH > VSV type with a magnitude of about 2%. We discuss how shear wave anisotropy may be used to infer the temporal evolution of the D″ layer.

UR - http://www.scopus.com/inward/record.url?scp=28444483899&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=28444483899&partnerID=8YFLogxK

U2 - 10.1016/j.pepi.2005.03.018

DO - 10.1016/j.pepi.2005.03.018

M3 - Article

AN - SCOPUS:28444483899

VL - 153

SP - 32

EP - 48

JO - Physics of the Earth and Planetary Interiors

JF - Physics of the Earth and Planetary Interiors

SN - 0031-9201

IS - 1-3

ER -