Deformation twinning behavior of twinning-induced plasticity steels with different carbon concentrations - Part 1: Analyses by atomic force microscopy and electron backscatter diffraction measurements-

Motomichi Koyama, Takahiro Sawaguchi, Kaneaki Tsuzaki

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Deformation twinning behavior in Fe-17Mn-0.6C, Fe-17Mn-0.8C, and Fe-18Mn-1.2C (wt.%) twinning-induced plasticity (TWIP) steels was investigated by atomic force microscopy (AFM) and electron backscatter diffraction pattern (EBSD) analyses. The AFM-based surface relief analysis combined with the EBSD measurements was employed to determine active twinning direction as well as deformation twin fraction in specific crystallographic orientations. A carbon addition is known to increase the stacking fault energy; however the deformation twin fraction in the 〈144〉 tensile orientation did not change against carbon concentration. On one hand, the 〈111〉 tensile orientation grains showed suppression of deformation twinning with increasing carbon concentration. These results imply that another factor in addition to the stacking fault energy-based criteria is required to interpret the deformation twinning behavior of carbon-added TWIP steels.

Original languageEnglish
Pages (from-to)1246-1252
Number of pages7
JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume100
Issue number10
DOIs
Publication statusPublished - Jan 1 2014

Fingerprint

Steel
Twinning
twinning
plastic properties
Electron diffraction
Plasticity
Atomic force microscopy
Carbon
atomic force microscopy
steels
carbon
diffraction
stacking fault energy
electrons
Stacking faults
Diffraction patterns
diffraction patterns
Crystal orientation
retarding

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Cite this

@article{6e8e2ba136c5463f83c6f1a1b3e689b9,
title = "Deformation twinning behavior of twinning-induced plasticity steels with different carbon concentrations - Part 1: Analyses by atomic force microscopy and electron backscatter diffraction measurements-",
abstract = "Deformation twinning behavior in Fe-17Mn-0.6C, Fe-17Mn-0.8C, and Fe-18Mn-1.2C (wt.{\%}) twinning-induced plasticity (TWIP) steels was investigated by atomic force microscopy (AFM) and electron backscatter diffraction pattern (EBSD) analyses. The AFM-based surface relief analysis combined with the EBSD measurements was employed to determine active twinning direction as well as deformation twin fraction in specific crystallographic orientations. A carbon addition is known to increase the stacking fault energy; however the deformation twin fraction in the 〈144〉 tensile orientation did not change against carbon concentration. On one hand, the 〈111〉 tensile orientation grains showed suppression of deformation twinning with increasing carbon concentration. These results imply that another factor in addition to the stacking fault energy-based criteria is required to interpret the deformation twinning behavior of carbon-added TWIP steels.",
author = "Motomichi Koyama and Takahiro Sawaguchi and Kaneaki Tsuzaki",
year = "2014",
month = "1",
day = "1",
doi = "10.2355/tetsutohagane.100.1246",
language = "English",
volume = "100",
pages = "1246--1252",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "10",

}

TY - JOUR

T1 - Deformation twinning behavior of twinning-induced plasticity steels with different carbon concentrations - Part 1

T2 - Analyses by atomic force microscopy and electron backscatter diffraction measurements-

AU - Koyama, Motomichi

AU - Sawaguchi, Takahiro

AU - Tsuzaki, Kaneaki

PY - 2014/1/1

Y1 - 2014/1/1

N2 - Deformation twinning behavior in Fe-17Mn-0.6C, Fe-17Mn-0.8C, and Fe-18Mn-1.2C (wt.%) twinning-induced plasticity (TWIP) steels was investigated by atomic force microscopy (AFM) and electron backscatter diffraction pattern (EBSD) analyses. The AFM-based surface relief analysis combined with the EBSD measurements was employed to determine active twinning direction as well as deformation twin fraction in specific crystallographic orientations. A carbon addition is known to increase the stacking fault energy; however the deformation twin fraction in the 〈144〉 tensile orientation did not change against carbon concentration. On one hand, the 〈111〉 tensile orientation grains showed suppression of deformation twinning with increasing carbon concentration. These results imply that another factor in addition to the stacking fault energy-based criteria is required to interpret the deformation twinning behavior of carbon-added TWIP steels.

AB - Deformation twinning behavior in Fe-17Mn-0.6C, Fe-17Mn-0.8C, and Fe-18Mn-1.2C (wt.%) twinning-induced plasticity (TWIP) steels was investigated by atomic force microscopy (AFM) and electron backscatter diffraction pattern (EBSD) analyses. The AFM-based surface relief analysis combined with the EBSD measurements was employed to determine active twinning direction as well as deformation twin fraction in specific crystallographic orientations. A carbon addition is known to increase the stacking fault energy; however the deformation twin fraction in the 〈144〉 tensile orientation did not change against carbon concentration. On one hand, the 〈111〉 tensile orientation grains showed suppression of deformation twinning with increasing carbon concentration. These results imply that another factor in addition to the stacking fault energy-based criteria is required to interpret the deformation twinning behavior of carbon-added TWIP steels.

UR - http://www.scopus.com/inward/record.url?scp=84908128617&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84908128617&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane.100.1246

DO - 10.2355/tetsutohagane.100.1246

M3 - Article

AN - SCOPUS:84908128617

VL - 100

SP - 1246

EP - 1252

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 10

ER -