Densification of ceramic composite films coated on steel by a wet process

Y. Muroya, A. Motoki, K. Shimanoe, T. Maeda, Y. Haruta, Y. Teraoka, N. Yamazoe

Research output: Contribution to conferencePaper

1 Citation (Scopus)


The densification of a ceramic coating based on SiO 2-Al 2O 3-TiO 2 by using wet processing was investigated by adding excess alkali silicates. Ceramic composite films (80-100 μm thick) were deposited on a steel plate by slurry coating with a doctor blade, followed by drying and calcination. The corrosion test in 1 mol/l HCl solution revealed that the number of through-holes in the coating decreased drastically with increasing amount of alkali silicates in the range of 26 to 33 or 40 wt.%. The coatings involving alkali silicates of 33 or 40 wt.% were stable to heating up to 800°C in air. The adhesive strength was also found to increase by three times with increasing amounts of alkali silicates.

Original languageEnglish
Number of pages11
Publication statusPublished - Dec 1 2004
Event206th ECS Meeting - Honolulu, HI, United States
Duration: Oct 3 2004Oct 8 2004


Other206th ECS Meeting
CountryUnited States
CityHonolulu, HI


All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Muroya, Y., Motoki, A., Shimanoe, K., Maeda, T., Haruta, Y., Teraoka, Y., & Yamazoe, N. (2004). Densification of ceramic composite films coated on steel by a wet process. 148-158. Paper presented at 206th ECS Meeting, Honolulu, HI, United States.