Depassivation and repassivation of titanium under particle impingements

E. Akiyama, Kaneaki Tsuzaki

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Current transients of a titanium microelectrode corresponding to an impingement of a single zirconia particle were measured in a buffer solution. It was found that the repassivation after a particle impact followed high field model of oxide growth. The apparent repassivation rate evaluated by the relation between the charge and the peak height of a current transient showed dependence on applied potential, and the apparent repassivation rate increased with increase of potential. The influence of potential applied passivation prior to particle impingement on the apparent repassivation rate was more predominant than that of the potential applied during impingement of relatively large particle. This indicates that the apparent repassivation rate does not represent the actual repassivation kinetics. It is suggested that the passive film formed prior to a particle impact and repassivation give rise to resistance against surface deformation and film breakdown, and that it affects the apparent repassivation behavior. copyright The Electrochemical Society.

Original languageEnglish
Title of host publicationCorrosion and Electrochemistry of Advanced Materials, In Honor of Koji Hashimoto
Pages437-446
Number of pages10
Volume1
Edition4
DOIs
Publication statusPublished - 2005
Externally publishedYes
Event208th Meeting of the Electrochemical Society - Los Angeles, CA, United States
Duration: Oct 16 2005Oct 21 2005

Other

Other208th Meeting of the Electrochemical Society
CountryUnited States
CityLos Angeles, CA
Period10/16/0510/21/05

Fingerprint

Titanium
Surface resistance
Microelectrodes
Passivation
Zirconia
Kinetics
Oxides

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Akiyama, E., & Tsuzaki, K. (2005). Depassivation and repassivation of titanium under particle impingements. In Corrosion and Electrochemistry of Advanced Materials, In Honor of Koji Hashimoto (4 ed., Vol. 1, pp. 437-446) https://doi.org/10.1149/1.2215527

Depassivation and repassivation of titanium under particle impingements. / Akiyama, E.; Tsuzaki, Kaneaki.

Corrosion and Electrochemistry of Advanced Materials, In Honor of Koji Hashimoto. Vol. 1 4. ed. 2005. p. 437-446.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Akiyama, E & Tsuzaki, K 2005, Depassivation and repassivation of titanium under particle impingements. in Corrosion and Electrochemistry of Advanced Materials, In Honor of Koji Hashimoto. 4 edn, vol. 1, pp. 437-446, 208th Meeting of the Electrochemical Society, Los Angeles, CA, United States, 10/16/05. https://doi.org/10.1149/1.2215527
Akiyama E, Tsuzaki K. Depassivation and repassivation of titanium under particle impingements. In Corrosion and Electrochemistry of Advanced Materials, In Honor of Koji Hashimoto. 4 ed. Vol. 1. 2005. p. 437-446 https://doi.org/10.1149/1.2215527
Akiyama, E. ; Tsuzaki, Kaneaki. / Depassivation and repassivation of titanium under particle impingements. Corrosion and Electrochemistry of Advanced Materials, In Honor of Koji Hashimoto. Vol. 1 4. ed. 2005. pp. 437-446
@inproceedings{92ce4c5b61054aab9b213137b3798dfb,
title = "Depassivation and repassivation of titanium under particle impingements",
abstract = "Current transients of a titanium microelectrode corresponding to an impingement of a single zirconia particle were measured in a buffer solution. It was found that the repassivation after a particle impact followed high field model of oxide growth. The apparent repassivation rate evaluated by the relation between the charge and the peak height of a current transient showed dependence on applied potential, and the apparent repassivation rate increased with increase of potential. The influence of potential applied passivation prior to particle impingement on the apparent repassivation rate was more predominant than that of the potential applied during impingement of relatively large particle. This indicates that the apparent repassivation rate does not represent the actual repassivation kinetics. It is suggested that the passive film formed prior to a particle impact and repassivation give rise to resistance against surface deformation and film breakdown, and that it affects the apparent repassivation behavior. copyright The Electrochemical Society.",
author = "E. Akiyama and Kaneaki Tsuzaki",
year = "2005",
doi = "10.1149/1.2215527",
language = "English",
isbn = "1566774977",
volume = "1",
pages = "437--446",
booktitle = "Corrosion and Electrochemistry of Advanced Materials, In Honor of Koji Hashimoto",
edition = "4",

}

TY - GEN

T1 - Depassivation and repassivation of titanium under particle impingements

AU - Akiyama, E.

AU - Tsuzaki, Kaneaki

PY - 2005

Y1 - 2005

N2 - Current transients of a titanium microelectrode corresponding to an impingement of a single zirconia particle were measured in a buffer solution. It was found that the repassivation after a particle impact followed high field model of oxide growth. The apparent repassivation rate evaluated by the relation between the charge and the peak height of a current transient showed dependence on applied potential, and the apparent repassivation rate increased with increase of potential. The influence of potential applied passivation prior to particle impingement on the apparent repassivation rate was more predominant than that of the potential applied during impingement of relatively large particle. This indicates that the apparent repassivation rate does not represent the actual repassivation kinetics. It is suggested that the passive film formed prior to a particle impact and repassivation give rise to resistance against surface deformation and film breakdown, and that it affects the apparent repassivation behavior. copyright The Electrochemical Society.

AB - Current transients of a titanium microelectrode corresponding to an impingement of a single zirconia particle were measured in a buffer solution. It was found that the repassivation after a particle impact followed high field model of oxide growth. The apparent repassivation rate evaluated by the relation between the charge and the peak height of a current transient showed dependence on applied potential, and the apparent repassivation rate increased with increase of potential. The influence of potential applied passivation prior to particle impingement on the apparent repassivation rate was more predominant than that of the potential applied during impingement of relatively large particle. This indicates that the apparent repassivation rate does not represent the actual repassivation kinetics. It is suggested that the passive film formed prior to a particle impact and repassivation give rise to resistance against surface deformation and film breakdown, and that it affects the apparent repassivation behavior. copyright The Electrochemical Society.

UR - http://www.scopus.com/inward/record.url?scp=33845270149&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33845270149&partnerID=8YFLogxK

U2 - 10.1149/1.2215527

DO - 10.1149/1.2215527

M3 - Conference contribution

AN - SCOPUS:33845270149

SN - 1566774977

SN - 9781566774970

VL - 1

SP - 437

EP - 446

BT - Corrosion and Electrochemistry of Advanced Materials, In Honor of Koji Hashimoto

ER -