Dependence of powder characteristics on die wall friction during ejection of compacts from die cavity

Taku Iwaoka, Yukiko Ozaki, Akira Fujiki

Research output: Contribution to journalArticle

Abstract

The evaluation of ejection behavior is important to the final formability of green compact because both the ejection and the compression in the powder die compaction are affected by die wall friction. In other words, there is a hysteretic relationship between the lateral pressure and compacting pressure. In this paper, the effect of powder characteristics on the ejection die wall friction was studied using a powder model that considers the hardness and shape of the powder. The ejection behavior was classified on the basis of the powder's characteristics coefficient drawn from the model. Next, the influence of the particle size distribution, in addition to that of the hardness and shape of the powder, on the ejection behavior was shown.

Original languageEnglish
Pages (from-to)73-79
Number of pages7
JournalFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
Volume64
Issue number2
DOIs
Publication statusPublished - Feb 1 2017
Externally publishedYes

Fingerprint

Powders
Friction
Compaction
Hardness
Formability
Particle size analysis

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

Cite this

@article{3e576376b3974ba9b8fdcfc67234bb23,
title = "Dependence of powder characteristics on die wall friction during ejection of compacts from die cavity",
abstract = "The evaluation of ejection behavior is important to the final formability of green compact because both the ejection and the compression in the powder die compaction are affected by die wall friction. In other words, there is a hysteretic relationship between the lateral pressure and compacting pressure. In this paper, the effect of powder characteristics on the ejection die wall friction was studied using a powder model that considers the hardness and shape of the powder. The ejection behavior was classified on the basis of the powder's characteristics coefficient drawn from the model. Next, the influence of the particle size distribution, in addition to that of the hardness and shape of the powder, on the ejection behavior was shown.",
author = "Taku Iwaoka and Yukiko Ozaki and Akira Fujiki",
year = "2017",
month = "2",
day = "1",
doi = "10.2497/jjspm.64.73",
language = "English",
volume = "64",
pages = "73--79",
journal = "Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy",
issn = "0532-8799",
publisher = "Japan Society of Powder and Powder Metallurgy",
number = "2",

}

TY - JOUR

T1 - Dependence of powder characteristics on die wall friction during ejection of compacts from die cavity

AU - Iwaoka, Taku

AU - Ozaki, Yukiko

AU - Fujiki, Akira

PY - 2017/2/1

Y1 - 2017/2/1

N2 - The evaluation of ejection behavior is important to the final formability of green compact because both the ejection and the compression in the powder die compaction are affected by die wall friction. In other words, there is a hysteretic relationship between the lateral pressure and compacting pressure. In this paper, the effect of powder characteristics on the ejection die wall friction was studied using a powder model that considers the hardness and shape of the powder. The ejection behavior was classified on the basis of the powder's characteristics coefficient drawn from the model. Next, the influence of the particle size distribution, in addition to that of the hardness and shape of the powder, on the ejection behavior was shown.

AB - The evaluation of ejection behavior is important to the final formability of green compact because both the ejection and the compression in the powder die compaction are affected by die wall friction. In other words, there is a hysteretic relationship between the lateral pressure and compacting pressure. In this paper, the effect of powder characteristics on the ejection die wall friction was studied using a powder model that considers the hardness and shape of the powder. The ejection behavior was classified on the basis of the powder's characteristics coefficient drawn from the model. Next, the influence of the particle size distribution, in addition to that of the hardness and shape of the powder, on the ejection behavior was shown.

UR - http://www.scopus.com/inward/record.url?scp=85016082921&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85016082921&partnerID=8YFLogxK

U2 - 10.2497/jjspm.64.73

DO - 10.2497/jjspm.64.73

M3 - Article

AN - SCOPUS:85016082921

VL - 64

SP - 73

EP - 79

JO - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

JF - Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy

SN - 0532-8799

IS - 2

ER -