Design of a single chip antenna combined with coplanar matching circuit and duplexer

Haruichi Kanaya, Kenta Seki, Keiji Yoshida

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

We designed the on-chip antenna combined with coplanar waveguide (CPW) broadband impedance matching circuit and duplexers with BPFs. Firstly, we designed a slot antenna with a radiation resistance matched to a three-pole bandpass filter (BPF) with 10.5GHz center frequency and 8% fractional bandwidth. Next, in order to obtain the high isolation from transmitter (Tx) to receiver (Rx), we attached the phase control line, which can be used as impedance matching, in front of each BPF in a duplexer. Finally, we design the Tx-and Rx-BPF matched to the input impedance of the antenna and phase control line. In the duplexer, Rx 2-pole BPF has center frequency=10.3GHz and bandwidth=40MHz, and Tx BPF has center frequency=10.7GHz and bandwidth=40MHz.

Original languageEnglish
Title of host publication2005 66th ARFTG Microwave Measurement Conference
Subtitle of host publicationDigital Communication System Metrics, ARFTG 2005
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1-4
Number of pages4
ISBN (Electronic)9781538672921
DOIs
Publication statusPublished - Jun 5 2018
Event66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005 - Washington, United States
Duration: Dec 1 2005Dec 2 2005

Publication series

Name2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005

Other

Other66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005
CountryUnited States
CityWashington
Period12/1/0512/2/05

Fingerprint

Bandpass filters
bandpass filters
antennas
chips
Antennas
Networks (circuits)
Phase control
phase control
impedance matching
bandwidth
Bandwidth
Poles
duplexers
poles
slot antennas
Slot antennas
Coplanar waveguides
radiation tolerance
transmitters
Transmitters

All Science Journal Classification (ASJC) codes

  • Safety, Risk, Reliability and Quality
  • Instrumentation
  • Radiation

Cite this

Kanaya, H., Seki, K., & Yoshida, K. (2018). Design of a single chip antenna combined with coplanar matching circuit and duplexer. In 2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005 (pp. 1-4). (2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ARFTG.2005.8373128

Design of a single chip antenna combined with coplanar matching circuit and duplexer. / Kanaya, Haruichi; Seki, Kenta; Yoshida, Keiji.

2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005. Institute of Electrical and Electronics Engineers Inc., 2018. p. 1-4 (2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kanaya, H, Seki, K & Yoshida, K 2018, Design of a single chip antenna combined with coplanar matching circuit and duplexer. in 2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005. 2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005, Institute of Electrical and Electronics Engineers Inc., pp. 1-4, 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005, Washington, United States, 12/1/05. https://doi.org/10.1109/ARFTG.2005.8373128
Kanaya H, Seki K, Yoshida K. Design of a single chip antenna combined with coplanar matching circuit and duplexer. In 2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005. Institute of Electrical and Electronics Engineers Inc. 2018. p. 1-4. (2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005). https://doi.org/10.1109/ARFTG.2005.8373128
Kanaya, Haruichi ; Seki, Kenta ; Yoshida, Keiji. / Design of a single chip antenna combined with coplanar matching circuit and duplexer. 2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 1-4 (2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005).
@inproceedings{ef17450406cd4a06954412f3e516b89b,
title = "Design of a single chip antenna combined with coplanar matching circuit and duplexer",
abstract = "We designed the on-chip antenna combined with coplanar waveguide (CPW) broadband impedance matching circuit and duplexers with BPFs. Firstly, we designed a slot antenna with a radiation resistance matched to a three-pole bandpass filter (BPF) with 10.5GHz center frequency and 8{\%} fractional bandwidth. Next, in order to obtain the high isolation from transmitter (Tx) to receiver (Rx), we attached the phase control line, which can be used as impedance matching, in front of each BPF in a duplexer. Finally, we design the Tx-and Rx-BPF matched to the input impedance of the antenna and phase control line. In the duplexer, Rx 2-pole BPF has center frequency=10.3GHz and bandwidth=40MHz, and Tx BPF has center frequency=10.7GHz and bandwidth=40MHz.",
author = "Haruichi Kanaya and Kenta Seki and Keiji Yoshida",
year = "2018",
month = "6",
day = "5",
doi = "10.1109/ARFTG.2005.8373128",
language = "English",
series = "2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "1--4",
booktitle = "2005 66th ARFTG Microwave Measurement Conference",
address = "United States",

}

TY - GEN

T1 - Design of a single chip antenna combined with coplanar matching circuit and duplexer

AU - Kanaya, Haruichi

AU - Seki, Kenta

AU - Yoshida, Keiji

PY - 2018/6/5

Y1 - 2018/6/5

N2 - We designed the on-chip antenna combined with coplanar waveguide (CPW) broadband impedance matching circuit and duplexers with BPFs. Firstly, we designed a slot antenna with a radiation resistance matched to a three-pole bandpass filter (BPF) with 10.5GHz center frequency and 8% fractional bandwidth. Next, in order to obtain the high isolation from transmitter (Tx) to receiver (Rx), we attached the phase control line, which can be used as impedance matching, in front of each BPF in a duplexer. Finally, we design the Tx-and Rx-BPF matched to the input impedance of the antenna and phase control line. In the duplexer, Rx 2-pole BPF has center frequency=10.3GHz and bandwidth=40MHz, and Tx BPF has center frequency=10.7GHz and bandwidth=40MHz.

AB - We designed the on-chip antenna combined with coplanar waveguide (CPW) broadband impedance matching circuit and duplexers with BPFs. Firstly, we designed a slot antenna with a radiation resistance matched to a three-pole bandpass filter (BPF) with 10.5GHz center frequency and 8% fractional bandwidth. Next, in order to obtain the high isolation from transmitter (Tx) to receiver (Rx), we attached the phase control line, which can be used as impedance matching, in front of each BPF in a duplexer. Finally, we design the Tx-and Rx-BPF matched to the input impedance of the antenna and phase control line. In the duplexer, Rx 2-pole BPF has center frequency=10.3GHz and bandwidth=40MHz, and Tx BPF has center frequency=10.7GHz and bandwidth=40MHz.

UR - http://www.scopus.com/inward/record.url?scp=85049344412&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85049344412&partnerID=8YFLogxK

U2 - 10.1109/ARFTG.2005.8373128

DO - 10.1109/ARFTG.2005.8373128

M3 - Conference contribution

AN - SCOPUS:85049344412

T3 - 2005 66th ARFTG Microwave Measurement Conference: Digital Communication System Metrics, ARFTG 2005

SP - 1

EP - 4

BT - 2005 66th ARFTG Microwave Measurement Conference

PB - Institute of Electrical and Electronics Engineers Inc.

ER -