Design of power receiving side in wireless charging system for UAV application

Aam Muharam, Tarek M. Mostafa, Reiji Hattori

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

This paper proposes a design of power receiving side on capacitive coupling wireless power transfer for an unmanned aerial vehicle (UAV). In order to minimize a component used in the system and fitted the circuit to the drone, the realized system must be very compact and efficient. The power receiving circuit in CPT system for simple application consists of rectifier and capacitor. In an advanced method, several components added into a circuit that makes the size and weight of the system increased. In this paper, all resonant matching system is placed and controlled in the primary side, thus the secondary side circuit could have a light module with minimum components. This paper focuses on the design a secondary side of CPT consisted of a rectifier, a DC-DC buck converter, and a charging circuit. The system is designed to operate with wide range input voltage. Simulation and experimental results have demonstrated that the proposed system could obtain charging process for Li-Ion cells battery by the output power of 8 W, with the power efficiency exceeding of 77%.

Original languageEnglish
Title of host publicationProceeding - ICSEEA 2017 International Conference on Sustainable Energy Engineering and Application
Subtitle of host publication"Continuous Improvement of Sustainable Energy for Eco-Mobility"
EditorsRudi Darussalam, Yukhi Mustaqim Kusuma Sya'bana, Ahmad Rajani, Erie Martides, Tinton Dwi Atmaja, Rakhmad Indra Pramana
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages133-139
Number of pages7
Volume2018-January
ISBN (Electronic)9781538617656
DOIs
Publication statusPublished - Jan 23 2018
Event2017 International Conference on Sustainable Energy Engineering and Application, ICSEEA 2017 - Jakarta, Indonesia
Duration: Oct 23 2017Oct 24 2017

Other

Other2017 International Conference on Sustainable Energy Engineering and Application, ICSEEA 2017
CountryIndonesia
CityJakarta
Period10/23/1710/24/17

Fingerprint

Unmanned aerial vehicles (UAV)
Networks (circuits)
DC-DC converters
Capacitors
Ions
Electric potential

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Muharam, A., Mostafa, T. M., & Hattori, R. (2018). Design of power receiving side in wireless charging system for UAV application. In R. Darussalam, Y. M. K. Sya'bana, A. Rajani, E. Martides, T. D. Atmaja, & R. I. Pramana (Eds.), Proceeding - ICSEEA 2017 International Conference on Sustainable Energy Engineering and Application: "Continuous Improvement of Sustainable Energy for Eco-Mobility" (Vol. 2018-January, pp. 133-139). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICSEEA.2017.8267698

Design of power receiving side in wireless charging system for UAV application. / Muharam, Aam; Mostafa, Tarek M.; Hattori, Reiji.

Proceeding - ICSEEA 2017 International Conference on Sustainable Energy Engineering and Application: "Continuous Improvement of Sustainable Energy for Eco-Mobility". ed. / Rudi Darussalam; Yukhi Mustaqim Kusuma Sya'bana; Ahmad Rajani; Erie Martides; Tinton Dwi Atmaja; Rakhmad Indra Pramana. Vol. 2018-January Institute of Electrical and Electronics Engineers Inc., 2018. p. 133-139.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Muharam, A, Mostafa, TM & Hattori, R 2018, Design of power receiving side in wireless charging system for UAV application. in R Darussalam, YMK Sya'bana, A Rajani, E Martides, TD Atmaja & RI Pramana (eds), Proceeding - ICSEEA 2017 International Conference on Sustainable Energy Engineering and Application: "Continuous Improvement of Sustainable Energy for Eco-Mobility". vol. 2018-January, Institute of Electrical and Electronics Engineers Inc., pp. 133-139, 2017 International Conference on Sustainable Energy Engineering and Application, ICSEEA 2017, Jakarta, Indonesia, 10/23/17. https://doi.org/10.1109/ICSEEA.2017.8267698
Muharam A, Mostafa TM, Hattori R. Design of power receiving side in wireless charging system for UAV application. In Darussalam R, Sya'bana YMK, Rajani A, Martides E, Atmaja TD, Pramana RI, editors, Proceeding - ICSEEA 2017 International Conference on Sustainable Energy Engineering and Application: "Continuous Improvement of Sustainable Energy for Eco-Mobility". Vol. 2018-January. Institute of Electrical and Electronics Engineers Inc. 2018. p. 133-139 https://doi.org/10.1109/ICSEEA.2017.8267698
Muharam, Aam ; Mostafa, Tarek M. ; Hattori, Reiji. / Design of power receiving side in wireless charging system for UAV application. Proceeding - ICSEEA 2017 International Conference on Sustainable Energy Engineering and Application: "Continuous Improvement of Sustainable Energy for Eco-Mobility". editor / Rudi Darussalam ; Yukhi Mustaqim Kusuma Sya'bana ; Ahmad Rajani ; Erie Martides ; Tinton Dwi Atmaja ; Rakhmad Indra Pramana. Vol. 2018-January Institute of Electrical and Electronics Engineers Inc., 2018. pp. 133-139
@inproceedings{3ec0cda566c141b0a6a072b5f68a17c8,
title = "Design of power receiving side in wireless charging system for UAV application",
abstract = "This paper proposes a design of power receiving side on capacitive coupling wireless power transfer for an unmanned aerial vehicle (UAV). In order to minimize a component used in the system and fitted the circuit to the drone, the realized system must be very compact and efficient. The power receiving circuit in CPT system for simple application consists of rectifier and capacitor. In an advanced method, several components added into a circuit that makes the size and weight of the system increased. In this paper, all resonant matching system is placed and controlled in the primary side, thus the secondary side circuit could have a light module with minimum components. This paper focuses on the design a secondary side of CPT consisted of a rectifier, a DC-DC buck converter, and a charging circuit. The system is designed to operate with wide range input voltage. Simulation and experimental results have demonstrated that the proposed system could obtain charging process for Li-Ion cells battery by the output power of 8 W, with the power efficiency exceeding of 77{\%}.",
author = "Aam Muharam and Mostafa, {Tarek M.} and Reiji Hattori",
year = "2018",
month = "1",
day = "23",
doi = "10.1109/ICSEEA.2017.8267698",
language = "English",
volume = "2018-January",
pages = "133--139",
editor = "Rudi Darussalam and Sya'bana, {Yukhi Mustaqim Kusuma} and Ahmad Rajani and Erie Martides and Atmaja, {Tinton Dwi} and Pramana, {Rakhmad Indra}",
booktitle = "Proceeding - ICSEEA 2017 International Conference on Sustainable Energy Engineering and Application",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

TY - GEN

T1 - Design of power receiving side in wireless charging system for UAV application

AU - Muharam, Aam

AU - Mostafa, Tarek M.

AU - Hattori, Reiji

PY - 2018/1/23

Y1 - 2018/1/23

N2 - This paper proposes a design of power receiving side on capacitive coupling wireless power transfer for an unmanned aerial vehicle (UAV). In order to minimize a component used in the system and fitted the circuit to the drone, the realized system must be very compact and efficient. The power receiving circuit in CPT system for simple application consists of rectifier and capacitor. In an advanced method, several components added into a circuit that makes the size and weight of the system increased. In this paper, all resonant matching system is placed and controlled in the primary side, thus the secondary side circuit could have a light module with minimum components. This paper focuses on the design a secondary side of CPT consisted of a rectifier, a DC-DC buck converter, and a charging circuit. The system is designed to operate with wide range input voltage. Simulation and experimental results have demonstrated that the proposed system could obtain charging process for Li-Ion cells battery by the output power of 8 W, with the power efficiency exceeding of 77%.

AB - This paper proposes a design of power receiving side on capacitive coupling wireless power transfer for an unmanned aerial vehicle (UAV). In order to minimize a component used in the system and fitted the circuit to the drone, the realized system must be very compact and efficient. The power receiving circuit in CPT system for simple application consists of rectifier and capacitor. In an advanced method, several components added into a circuit that makes the size and weight of the system increased. In this paper, all resonant matching system is placed and controlled in the primary side, thus the secondary side circuit could have a light module with minimum components. This paper focuses on the design a secondary side of CPT consisted of a rectifier, a DC-DC buck converter, and a charging circuit. The system is designed to operate with wide range input voltage. Simulation and experimental results have demonstrated that the proposed system could obtain charging process for Li-Ion cells battery by the output power of 8 W, with the power efficiency exceeding of 77%.

UR - http://www.scopus.com/inward/record.url?scp=85049891983&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85049891983&partnerID=8YFLogxK

U2 - 10.1109/ICSEEA.2017.8267698

DO - 10.1109/ICSEEA.2017.8267698

M3 - Conference contribution

VL - 2018-January

SP - 133

EP - 139

BT - Proceeding - ICSEEA 2017 International Conference on Sustainable Energy Engineering and Application

A2 - Darussalam, Rudi

A2 - Sya'bana, Yukhi Mustaqim Kusuma

A2 - Rajani, Ahmad

A2 - Martides, Erie

A2 - Atmaja, Tinton Dwi

A2 - Pramana, Rakhmad Indra

PB - Institute of Electrical and Electronics Engineers Inc.

ER -