Design study of 1MHZ induction cavity for induction synchrotron

Kota Torikai, Yoshio Arakida, Shigemi Inagaki, Kunio Koseki, Eiji Nakamura, Takeshi Toyama, Masayoshi Wake, Junichi Kishiro, Ken Takayama, Kenji Ishibashi

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Abstract

An induction cavity was designed for the POP experiment of induction synchrotron using the KEK 12GeV PS. It must be operated at a repetition rate of 667-882 kHz for acceleration from the injection energy to the flat-top energy. Design issues include handling of heat deposit, minimization of voltage droop and coupling impedance, and tolerable jitter. Its Q-value on the cavity assembled following the design was obtained from the longitudinal coupling impedance measurement. Effects of the droop in the acceleration voltage on the synchrotron motion, which has been estimated from the circuit parameter measurement on R, C, and L, was analysed from a longitudinal beam dynamics point of view. The effect of the droop is given by the square of phase delay.

Original languageEnglish
Pages1784-1786
Number of pages3
Publication statusPublished - Dec 1 2003
EventPAC 2003 - Proceedings of the 2003 IEEE Particle Accelerator Conference - Portland, OR, United States
Duration: May 12 2003May 16 2003

Other

OtherPAC 2003 - Proceedings of the 2003 IEEE Particle Accelerator Conference
CountryUnited States
CityPortland, OR
Period5/12/035/16/03

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint Dive into the research topics of 'Design study of 1MHZ induction cavity for induction synchrotron'. Together they form a unique fingerprint.

  • Cite this

    Torikai, K., Arakida, Y., Inagaki, S., Koseki, K., Nakamura, E., Toyama, T., Wake, M., Kishiro, J., Takayama, K., & Ishibashi, K. (2003). Design study of 1MHZ induction cavity for induction synchrotron. 1784-1786. Paper presented at PAC 2003 - Proceedings of the 2003 IEEE Particle Accelerator Conference, Portland, OR, United States.