Design study on future accelerator magnets using largely keystoned cables

K. Ishibashi, K. Kamezawa, A. Katase, A. Terashima, Y. Sakakibara, Y. Funahashi, H. H. Hirabayashi

Research output: Contribution to journalArticle

Abstract

In the near future, superconducting magnets with a small beam aperture will be required for high energy proton colliders. When coils are designed to be self arched over a small beam pipe, it simplifies the magnet construction both in the winding procedure and in the field quality control. Fabrication of these coils requires cables with large keystone angles. A new structure of “braid-in-strands” is devised to produce these cables. Two types of magnet coils are studied for use of these cables. The straight section of a magnet has been fabricated as a preliminary test. Strand positions have all been measured on the cross section of the coil. Magnetic field analysis is made on the basis of the position data of the strands.

Original languageEnglish
Pages (from-to)1628-1631
Number of pages4
JournalIEEE Transactions on Magnetics
Volume25
Issue number2
DOIs
Publication statusPublished - Mar 1989

Fingerprint

Accelerator magnets
Magnets
Cables
Superconducting magnets
Colliding beam accelerators
Quality control
Protons
Pipe
Magnetic fields
Fabrication

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Ishibashi, K., Kamezawa, K., Katase, A., Terashima, A., Sakakibara, Y., Funahashi, Y., & Hirabayashi, H. H. (1989). Design study on future accelerator magnets using largely keystoned cables. IEEE Transactions on Magnetics, 25(2), 1628-1631. https://doi.org/10.1109/20.92611

Design study on future accelerator magnets using largely keystoned cables. / Ishibashi, K.; Kamezawa, K.; Katase, A.; Terashima, A.; Sakakibara, Y.; Funahashi, Y.; Hirabayashi, H. H.

In: IEEE Transactions on Magnetics, Vol. 25, No. 2, 03.1989, p. 1628-1631.

Research output: Contribution to journalArticle

Ishibashi, K, Kamezawa, K, Katase, A, Terashima, A, Sakakibara, Y, Funahashi, Y & Hirabayashi, HH 1989, 'Design study on future accelerator magnets using largely keystoned cables', IEEE Transactions on Magnetics, vol. 25, no. 2, pp. 1628-1631. https://doi.org/10.1109/20.92611
Ishibashi K, Kamezawa K, Katase A, Terashima A, Sakakibara Y, Funahashi Y et al. Design study on future accelerator magnets using largely keystoned cables. IEEE Transactions on Magnetics. 1989 Mar;25(2):1628-1631. https://doi.org/10.1109/20.92611
Ishibashi, K. ; Kamezawa, K. ; Katase, A. ; Terashima, A. ; Sakakibara, Y. ; Funahashi, Y. ; Hirabayashi, H. H. / Design study on future accelerator magnets using largely keystoned cables. In: IEEE Transactions on Magnetics. 1989 ; Vol. 25, No. 2. pp. 1628-1631.
@article{429043f381574dc180d99fbc5b3e3697,
title = "Design study on future accelerator magnets using largely keystoned cables",
abstract = "In the near future, superconducting magnets with a small beam aperture will be required for high energy proton colliders. When coils are designed to be self arched over a small beam pipe, it simplifies the magnet construction both in the winding procedure and in the field quality control. Fabrication of these coils requires cables with large keystone angles. A new structure of “braid-in-strands” is devised to produce these cables. Two types of magnet coils are studied for use of these cables. The straight section of a magnet has been fabricated as a preliminary test. Strand positions have all been measured on the cross section of the coil. Magnetic field analysis is made on the basis of the position data of the strands.",
author = "K. Ishibashi and K. Kamezawa and A. Katase and A. Terashima and Y. Sakakibara and Y. Funahashi and Hirabayashi, {H. H.}",
year = "1989",
month = "3",
doi = "10.1109/20.92611",
language = "English",
volume = "25",
pages = "1628--1631",
journal = "IEEE Transactions on Magnetics",
issn = "0018-9464",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "2",

}

TY - JOUR

T1 - Design study on future accelerator magnets using largely keystoned cables

AU - Ishibashi, K.

AU - Kamezawa, K.

AU - Katase, A.

AU - Terashima, A.

AU - Sakakibara, Y.

AU - Funahashi, Y.

AU - Hirabayashi, H. H.

PY - 1989/3

Y1 - 1989/3

N2 - In the near future, superconducting magnets with a small beam aperture will be required for high energy proton colliders. When coils are designed to be self arched over a small beam pipe, it simplifies the magnet construction both in the winding procedure and in the field quality control. Fabrication of these coils requires cables with large keystone angles. A new structure of “braid-in-strands” is devised to produce these cables. Two types of magnet coils are studied for use of these cables. The straight section of a magnet has been fabricated as a preliminary test. Strand positions have all been measured on the cross section of the coil. Magnetic field analysis is made on the basis of the position data of the strands.

AB - In the near future, superconducting magnets with a small beam aperture will be required for high energy proton colliders. When coils are designed to be self arched over a small beam pipe, it simplifies the magnet construction both in the winding procedure and in the field quality control. Fabrication of these coils requires cables with large keystone angles. A new structure of “braid-in-strands” is devised to produce these cables. Two types of magnet coils are studied for use of these cables. The straight section of a magnet has been fabricated as a preliminary test. Strand positions have all been measured on the cross section of the coil. Magnetic field analysis is made on the basis of the position data of the strands.

UR - http://www.scopus.com/inward/record.url?scp=0024627503&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024627503&partnerID=8YFLogxK

U2 - 10.1109/20.92611

DO - 10.1109/20.92611

M3 - Article

AN - SCOPUS:0024627503

VL - 25

SP - 1628

EP - 1631

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

SN - 0018-9464

IS - 2

ER -