EBSD-FEMデータ変換インターフェースの構築とそれを用いたイメージベース結晶塑性解析

Translated title of the contribution: Development of a EBSD-FEM data conversion interface and the image-based crystal plasticity analysis

河野 義樹, 大橋 鉄也, 眞山 剛, 田中 將己, 坂本 盛敬, 奥山 彫夢, 佐藤 満弘

Research output: Contribution to journalConference article

Abstract

<p>Image-based deformation simulation of microstructures in metals is attracting attention; however, the data conversion processes from the images of microstructures into the geometric models for the deformation simulation are now inconvenient, and there is a possibility that it prevents diffusion of the image-based simulation. In order to solve the problem, we developed an interface to convert the data of crystal orientation maps obtained by Electron Back-Scatter Diffraction (EBSD) patterns into that of geometric models for Crystal Plasticity Finite Element (CPFE) analysis. The interface incorporates several functions for data cleaning and coarse graining of the microstructures: functions to narrow down the limits of Eulerian angles presenting crystal orientations, integrate crystal grains with similar crystal orientations, eliminate small crystal grains, select representative crystal orientation in each crystal grain, and so on. The interface was applied to an orientation map of polycrystal microstructure in pure titanium, and the course-grained geometric models were successfully obtained. Image-based CPFE analysis was conducted using the geometric models with different number of finite elements. The numbers of crystal grains were assumed to be around 50 in any geometric models. A dislocation density dependent constitutive equation was employed and uniaxial tensile loading was applied to the geometric models by the forced displacement. The results showed that spatial distributions of stress, strain, and dislocation density were good agreement among geometric models with different number of elements in both elastic and plastic ranges while values of the strain and dislocation density showed quantitatively dependency of the number of elements on their distributions in the plastic ranges. These features indicate that the qualitatively similar results can be obtained using the developed interface on the condition that coarse graining of the microstructures does not occur even though the number of elements is changed.</p>
Original languageJapanese
Pages (from-to)17-00559-17-00559
Journal日本機械学会論文集
Volume84
Issue number860
DOIs
Publication statusPublished - 2018

Fingerprint

plastic properties
diffraction
crystals
electrons
microstructure
plastics
simulation
constitutive equations
polycrystals
cleaning
spatial distribution
diffraction patterns
titanium

Cite this

EBSD-FEMデータ変換インターフェースの構築とそれを用いたイメージベース結晶塑性解析. / 河野義樹; 大橋鉄也; 眞山剛; 田中將己; 坂本盛敬; 奥山彫夢; 佐藤満弘.

In: 日本機械学会論文集, Vol. 84, No. 860, 2018, p. 17-00559-17-00559.

Research output: Contribution to journalConference article

河野義樹, 大橋鉄也, 眞山剛, 田中將己, 坂本盛敬, 奥山彫夢 & 佐藤満弘 2018, 'EBSD-FEMデータ変換インターフェースの構築とそれを用いたイメージベース結晶塑性解析', 日本機械学会論文集, vol. 84, no. 860, pp. 17-00559-17-00559. https://doi.org/10.1299/transjsme.17-00559
河野義樹 ; 大橋鉄也 ; 眞山剛 ; 田中將己 ; 坂本盛敬 ; 奥山彫夢 ; 佐藤満弘. / EBSD-FEMデータ変換インターフェースの構築とそれを用いたイメージベース結晶塑性解析. In: 日本機械学会論文集. 2018 ; Vol. 84, No. 860. pp. 17-00559-17-00559.
@article{b186052d5d7a4c08b42e3ee108ddb78e,
title = "EBSD-FEMデータ変換インターフェースの構築とそれを用いたイメージベース結晶塑性解析",
abstract = "Image-based deformation simulation of microstructures in metals is attracting attention; however, the data conversion processes from the images of microstructures into the geometric models for the deformation simulation are now inconvenient, and there is a possibility that it prevents diffusion of the image-based simulation. In order to solve the problem, we developed an interface to convert the data of crystal orientation maps obtained by Electron Back-Scatter Diffraction (EBSD) patterns into that of geometric models for Crystal Plasticity Finite Element (CPFE) analysis. The interface incorporates several functions for data cleaning and coarse graining of the microstructures: functions to narrow down the limits of Eulerian angles presenting crystal orientations, integrate crystal grains with similar crystal orientations, eliminate small crystal grains, select representative crystal orientation in each crystal grain, and so on. The interface was applied to an orientation map of polycrystal microstructure in pure titanium, and the course-grained geometric models were successfully obtained. Image-based CPFE analysis was conducted using the geometric models with different number of finite elements. The numbers of crystal grains were assumed to be around 50 in any geometric models. A dislocation density dependent constitutive equation was employed and uniaxial tensile loading was applied to the geometric models by the forced displacement. The results showed that spatial distributions of stress, strain, and dislocation density were good agreement among geometric models with different number of elements in both elastic and plastic ranges while values of the strain and dislocation density showed quantitatively dependency of the number of elements on their distributions in the plastic ranges. These features indicate that the qualitatively similar results can be obtained using the developed interface on the condition that coarse graining of the microstructures does not occur even though the number of elements is changed.",
author = "義樹 河野 and 鉄也 大橋 and 剛 眞山 and 將己 田中 and 盛敬 坂本 and 彫夢 奥山 and 満弘 佐藤",
year = "2018",
doi = "10.1299/transjsme.17-00559",
language = "Japanese",
volume = "84",
pages = "17--00559--17--00559",
journal = "日本機械学会論文集",
publisher = "一般社団法人日本機械学会",
number = "860",

}

TY - JOUR

T1 - EBSD-FEMデータ変換インターフェースの構築とそれを用いたイメージベース結晶塑性解析

AU - 河野, 義樹

AU - 大橋, 鉄也

AU - 眞山, 剛

AU - 田中, 將己

AU - 坂本, 盛敬

AU - 奥山, 彫夢

AU - 佐藤, 満弘

PY - 2018

Y1 - 2018

N2 - Image-based deformation simulation of microstructures in metals is attracting attention; however, the data conversion processes from the images of microstructures into the geometric models for the deformation simulation are now inconvenient, and there is a possibility that it prevents diffusion of the image-based simulation. In order to solve the problem, we developed an interface to convert the data of crystal orientation maps obtained by Electron Back-Scatter Diffraction (EBSD) patterns into that of geometric models for Crystal Plasticity Finite Element (CPFE) analysis. The interface incorporates several functions for data cleaning and coarse graining of the microstructures: functions to narrow down the limits of Eulerian angles presenting crystal orientations, integrate crystal grains with similar crystal orientations, eliminate small crystal grains, select representative crystal orientation in each crystal grain, and so on. The interface was applied to an orientation map of polycrystal microstructure in pure titanium, and the course-grained geometric models were successfully obtained. Image-based CPFE analysis was conducted using the geometric models with different number of finite elements. The numbers of crystal grains were assumed to be around 50 in any geometric models. A dislocation density dependent constitutive equation was employed and uniaxial tensile loading was applied to the geometric models by the forced displacement. The results showed that spatial distributions of stress, strain, and dislocation density were good agreement among geometric models with different number of elements in both elastic and plastic ranges while values of the strain and dislocation density showed quantitatively dependency of the number of elements on their distributions in the plastic ranges. These features indicate that the qualitatively similar results can be obtained using the developed interface on the condition that coarse graining of the microstructures does not occur even though the number of elements is changed.

AB - Image-based deformation simulation of microstructures in metals is attracting attention; however, the data conversion processes from the images of microstructures into the geometric models for the deformation simulation are now inconvenient, and there is a possibility that it prevents diffusion of the image-based simulation. In order to solve the problem, we developed an interface to convert the data of crystal orientation maps obtained by Electron Back-Scatter Diffraction (EBSD) patterns into that of geometric models for Crystal Plasticity Finite Element (CPFE) analysis. The interface incorporates several functions for data cleaning and coarse graining of the microstructures: functions to narrow down the limits of Eulerian angles presenting crystal orientations, integrate crystal grains with similar crystal orientations, eliminate small crystal grains, select representative crystal orientation in each crystal grain, and so on. The interface was applied to an orientation map of polycrystal microstructure in pure titanium, and the course-grained geometric models were successfully obtained. Image-based CPFE analysis was conducted using the geometric models with different number of finite elements. The numbers of crystal grains were assumed to be around 50 in any geometric models. A dislocation density dependent constitutive equation was employed and uniaxial tensile loading was applied to the geometric models by the forced displacement. The results showed that spatial distributions of stress, strain, and dislocation density were good agreement among geometric models with different number of elements in both elastic and plastic ranges while values of the strain and dislocation density showed quantitatively dependency of the number of elements on their distributions in the plastic ranges. These features indicate that the qualitatively similar results can be obtained using the developed interface on the condition that coarse graining of the microstructures does not occur even though the number of elements is changed.

U2 - 10.1299/transjsme.17-00559

DO - 10.1299/transjsme.17-00559

M3 - Conference article

VL - 84

SP - 17-00559-17-00559

JO - 日本機械学会論文集

JF - 日本機械学会論文集

IS - 860

ER -